Research/Scholarly/Creative Works

Journal Articles

• Stevenson A., Freeman J., Jermy M. and Chen J. (2023) Airborne transmission: a new paradigm with major implications for infection control and public health. The New Zealand medical journal 136(1570): 69-77.

• Choi JJE., Chen J., Choi YJ., Moffat SM., Duncan WJ., Waddell JN. and Jermy M. (2022) Dental high-speed handpiece and ultrasonic scaler aerosol generation levels and the effect of suction and air supply.. Infect Control Hosp Epidemiol : 1-8. http://dx.doi.org/10.1017/ice.2022.196.

• Chyrva I., Jermy M., Strand T. and Richardson B. (2022) Evaluation of the pattern of spray released from a moving multicopter. Pest Management Science http://dx.doi.org/10.1002/ps.7320.

• Derrick D., Kabaliuk N., Longworth L., Pishyar-Dehkordi P. and Jermy M. (2022) Speech air flow with and without face masks. Scientific Reports 12(1) http://dx.doi.org/10.1038/s41598-021-04745-z.

• Williamson PN., Docherty PD., Khanafer A., Yazdi SG., Jermy M., Kabaliuk N. and Murton B. (2022) Particle Image Velocimetry Evaluation of Hemodynamics Proximal to the Kissing Stent Configuration in the Aorto-Iliac Bifurcation. Journal of Endovascular Therapy http://dx.doi.org/10.1177/15266028221141024.

• Brooks T., Garnich M. and Jermy M. (2021) Sensitivity of material model parameters on finite element models of infant head impacts. Biomechanics and Modeling in Mechanobiology 20(5): 1675-1688. http://dx.doi.org/10.1007/s10237-021-01469-x.

• Brooks T., Zwirner J., Hammer N., Ondruschka B. and Jermy M. (2021) Preliminary observations of the sequence of damage in excised human juvenile cranial bone at speeds equivalent to falls from 1.6 m. International Journal of Legal Medicine 135(2): 527-538. http://dx.doi.org/10.1007/s00414-020-02409-7.

• Jermy MC., Spence CJT., Kirton R., O’Donnell JF., Kabaliuk N., Gaw S., Hockey H., Jiang Y., Zulkhairi Abidin Z. and Dougherty RL. (2021) Assessment of dispersion of airborne particles of oral/nasal fluid by high flow nasal cannula therapy. PLoS ONE 16(2 February) http://dx.doi.org/10.1371/journal.pone.0246123.

• Pancholy P., Clemens K., Geoghegan P., Jermy M., Moyers Gonzalez M. and Wilson PL. (2021) Numerical study of flow structure and pedestrian-level wind comfort inside urban street canyons. Journal of the Royal Society of New Zealand (Special Issue: Fluids in New Zealand) http://dx.doi.org/10.1080/03036758.2021.1892776.

• Salati H., Bartley J., Yazdi SG., Jermy M. and White DE. (2021) Neti pot irrigation volume filling simulation using anatomically accurate in-vivo nasal airway geometry. Respiratory Physiology and Neurobiology 284 http://dx.doi.org/10.1016/j.resp.2020.103580.

• Underwood L., Kiffer T., Sran H., Jay K., Villien A., Kabaliuk N. and Jermy M. (2021) Simultaneous assessment of thermal comfort and aerodynamic drag of cycling helmets as a function of ventilation hole configuration. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology 235(4): 277-285. http://dx.doi.org/10.1177/1754337119852538.

• Williamson PN., Docherty PD., Yazdi SG., Khanafer A., Kabaliuk N. and Jermy M. (2021) PIV Analysis of Haemodynamics Distal to the Frozen Elephant Trunk Stent Surrogate. Cardiovascular Engineering and Technology 12(4): 373-386. http://dx.doi.org/10.1007/s13239-021-00521-2.

• Williamson PN., Docherty PD., Yazdi SG., Khanafer A., Kabaliuk N., Jermy M. and Geoghegan PH. (2021) Review of the Development of Haemodynamic Modelling Techniques to Capture Flow Behaviour in Arteries Affected by Aneurysm, Atherosclerosis and Stenting. ASME Journal of Biomechanical Engineering.

• Yazdi SG., Docherty PD., Khanafer A., Jermy M., Kabaliuk N., Geoghegan PH. and Williamson P. (2021) In-vitro particle image velocimetry assessment of the endovascular haemodynamic features distal of stent-grafts that are associated with development of limb occlusion. Journal of the Royal Society of New Zealand 51(2): 361-374. http://dx.doi.org/10.1080/03036758.2020.1826988.

• Yazdi SG., Docherty PD., Williamson PN., Jermy M., Kabaliuk N., Khanafer A. and Geoghegan PH. (2021) In vitro pulsatile flow study in compliant and rigid ascending aorta phantoms by stereo particle image velocimetry. Medical Engineering and Physics 96: 81-90. http://dx.doi.org/10.1016/j.medengphy.2021.08.010.

• Ho WH., Tshimanga IJ., Ngoepe MN., Jermy MC. and Geoghegan PH. (2020) Evaluation of a Desktop 3D Printed Rigid Refractive-Indexed-Matched Flow Phantom for PIV Measurements on Cerebral Aneurysms. Cardiovascular Engineering and Technology 11(1): 14-23. http://dx.doi.org/10.1007/s13239-019-00444-z.

• Laven RA. and Jermy MC. (2020) Measuring the torque required to cause vertebral dislocation in cattle tails. New Zealand Veterinary Journal 68(2): 107-111. http://dx.doi.org/10.1080/00480169.2019.1685019.

• Li J., Mutreja I., Tredinnick S., Jermy M., Hooper GJ. and Woodfield TBF. (2020) Hydrodynamic control of titania nanotube formation on Ti-6Al-4V alloys enhances osteogenic differentiation of human mesenchymal stromal cells. Materials Science and Engineering C 109 http://dx.doi.org/10.1016/j.msec.2019.110562.

• Longworth L., Post S., Jermy M., Hendrickson H., Steel J., Cannon E., Gleadow J. and Brown S. (2020) Evaluating capacitive wetness sensors for measuring deposition in electrostatically charged spraying operations. Computers and Electronics in Agriculture 179 http://dx.doi.org/10.1016/j.compag.2020.105829.

• Williams EMP., Graham ES., Jermy MC., Kieser DC. and Taylor MC. (2019) The Dynamics of Blood Drop Release from Swinging Objects in the Creation of Cast-off Bloodstain Patterns. Journal of Forensic Sciences 64(2): 413-421. http://dx.doi.org/10.1111/1556-4029.13855.

• Yazdi SG., Huetter L., Docherty PD., Williamson PN., Clucas D., Jermy M. and Geoghegan PH. (2019) A novel fabrication method for compliant silicone phantoms of arterial geometry for use in particle image velocimetry of haemodynamics. Applied Sciences (Switzerland) 9(18) http://dx.doi.org/10.3390/app9183811.

• Adams CF., Geoghegan PH., Spence CJ. and Jermy MC. (2018) Modelling nasal high flow therapy effects on upper airway resistance and resistive work of breathing. Respiratory Physiology and Neurobiology 254: 23-29. http://dx.doi.org/10.1016/j.resp.2018.03.014.

• Brooks T., Choi JE., Garnich M., Hammer N., Waddell JN., Duncan W. and Jermy M. (2018) Finite element models and material data for analysis of infant head impacts. Heliyon 4(12) http://dx.doi.org/10.1016/j.heliyon.2018.e01010.

• Jermy MC., vircondelet C. and underwood L. (2018) Thermal comfort and drag of a streamlined cycling helmet as a function of ventilation hole placement. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology 232(1): 15-21. http://dx.doi.org/10.1177/1754337117707876.

• Ondruschka B., Scholze M., Blackburne W., Dressler J., Jermy M., Schwarz M., Swain M., Waddell N. and Hammer N. (2018) Biomechanische Experimente zu Rippenbruch-Szenarien bei Kleinkindern. Archiv für Kriminologie 242(5/6): 173-183.

• Yazdi SG., Geoghegan PH., Docherty PD., Jermy M. and Khanafer A. (2018) A Review of Arterial Phantom Fabrication Methods for Flow Measurement Using PIV Techniques. Annals of Biomedical Engineering 46(11): 1697-1721. http://dx.doi.org/10.1007/s10439-018-2085-8.

• Docherty PD., Geoghegan PH., Huetter L., Jermy M. and Sellier M. (2017) Regressive cross-correlation of pressure signals in the region of stenosis: Insights from particle image velocimetry experimentation. Biomedical Signal Processing and Control 32: 143-149. http://dx.doi.org/10.1016/j.bspc.2016.09.025.

• F. Adams C., C. Jermy M., H. Geoghegan P. and Spence CJT. (2017) Effect of variation in the COPD breathing flow pattern on end-tidal CO2 tension: An in vitro study. Medical and Clinical Archives 1(3) http://dx.doi.org/10.15761/mca.1000114.

• Falland-Cheung L., Waddell JN., Lazarjan MS., Jermy MC., Winter T., Tong D. and Brunton PA. (2017) Use of agar/glycerol and agar/glycerol/water as a translucent brain simulant for ballistic testing. Journal of the Mechanical Behavior of Biomedical Materials 65: 665-671. http://dx.doi.org/10.1016/j.jmbbm.2016.09.034.

• Flint TJ., Jermy MC., New TH. and Ho WH. (2017) Computational study of a pitching bio-inspired corrugated airfoil. International Journal of Heat and Fluid Flow 65: 328-341. http://dx.doi.org/10.1016/j.ijheatfluidflow.2016.12.009.

• Geoghegan PH., Jermy MC. and Nobes DS. (2017) A PIV comparison of the flow field and wall shear stress in rigid and compliant models of healthy carotid arteries. Journal of Mechanics in Medicine and Biology 17(3) http://dx.doi.org/10.1142/S0219519417500415.

• Geoghegan PH., Laffra AM., Hoogendorp NK., Taylor MC. and Jermy MC. (2017) Experimental measurement of breath exit velocity and expirated bloodstain patterns produced under different exhalation mechanisms. International Journal of Legal Medicine 131(5): 1193-1201. http://dx.doi.org/10.1007/s00414-017-1545-2.

• Hilton M., Nickling B., Wakes S., Sherman D., Konlechner T., Jermy M. and Geoghegan P. (2017) An efficient, self-orienting, vertical-array, sand trap. Aeolian Research 25: 11-21. http://dx.doi.org/10.1016/j.aeolia.2017.01.003.

• Kabaliuk N., Nejati A., Loch C., Schwass D., Cater JE. and Jermy MC. (2017) Strategies for Segmenting the Upper Airway in Cone-Beam Computed Tomography (CBCT) Data. Open Journal of Medical Imaging 07(04): 196-219. http://dx.doi.org/10.4236/ojmi.2017.74019.

• Pancholy PP., Clemens K., Geoghegan P., Jermy M., Moyers-Gonzalez M. and Wilson PL. (2017) Numerical Study of Flow and Pedestrian Level Wind Comfort Inside Uniform and Non-Uniform Street Canyons with Different Street Width to Building Height Aspect Ratios. .

• Stotesbury T., Taylor MC. and Jermy MC. (2017) Simulated transfer dynamics of blood on to cardboard and comparison to simple fluids for blood substitute development and assessment. Journal of the Canadian Society of Forensic Science 50(1): 30-41. http://dx.doi.org/10.1080/00085030.2017.1258209.

• Falland-Cheung L., Piccione N., Zhao T., Lazarjan MS., Hanlin S., Jermy M. and Waddell JN. (2016) Investigation of dental alginate and agar impression materials as a brain simulant for ballistic testing. Forensic Science International 263: 169-175. http://dx.doi.org/10.1016/j.forsciint.2016.04.005.

• Geoghegan PH., Spence CJT., Wilhelm J., Kabaliuk N., Taylor MC. and Jermy MC. (2016) Experimental and computational investigation of the trajectories of blood drops ejected from the nose. International Journal of Legal Medicine 130(2): 563-568. http://dx.doi.org/10.1007/s00414-015-1163-9.

• Huetter L., Geoghegan PH., Docherty PD., Lazarjan MS., Clucas D. and Jermy MC. (2016) Fabrication of a compliant phantom of the human aortic arch for use in Particle Image Velocimetry (PIV) experimentation. Current Directions in Biomedical Engineering 2(1): 493-497. http://dx.doi.org/10.1515/cdbme-2016-0109.

• Kokhanenko P., Brown K. and Jermy M. (2016) Silica aquasols of incipient instability: synthesis, growth kinetics and long term stability. Colloids and Surfaces A: Physicochemical and Engineering Aspects 493: 18-31. http://dx.doi.org/10.1016/j.colsurfa.2015.10.026.

• Nejati A., Kabaliuk N., Jermy MC. and Cater JE. (2016) A deformable template method for describing and averaging the anatomical variation of the human nasal cavity. BMC Medical Imaging 16(1) http://dx.doi.org/10.1186/s12880-016-0154-8.

• Stotesbury T., Illes M., Jermy M., Taylor M., Wilhelm J. and Vreugdenhil A. (2016) Three physical factors that affect the crown growth of the impact mechanism and its implications for bloodstain pattern analysis. Forensic Science International 266: 254-262. http://dx.doi.org/10.1016/j.forsciint.2016.05.038.

• Stotesbury TE., Taylor MC. and Jermy MC. (2016) Passive drip stain formation dynamics of blood onto hard surfaces and comparison to simple fluids for blood substitute development and assessment. Journal of Forensic Sciences 62(1): 74-82. http://dx.doi.org/10.1111/1556-4029.13217.

• Van Hove SC., Storey J., Adams C., Dey K., Geoghegan PH., Kabaliuk N., Oldfield SD., Spence CJT., Jermy MC. and Suresh V. (2016) An Experimental and Numerical Investigation of CO2 Distribution in the Upper Airways During Nasal High Flow Therapy. Annals of Biomedical Engineering 44(10): 3007-3019. http://dx.doi.org/10.1007/s10439-016-1604-8.

• Ahmed G., Sellier M., Lee YC., Jermy M. and Taylor M. (2015) Rheological effects on the leveling dynamics of thin fluid films. International Journal of Numerical Methods for Heat and Fluid Flow 25(8): 1850-1867. http://dx.doi.org/10.1108/HFF-10-2013-0295.

• Flint T., Ho WH., New TH. and Jermy M. (2015) Validated Unsteady Computational Fluid Dynamic Analysis of an Oscillating Bio-Inspired Airfoil. Applied Mechanics and Materials: Mechanical and Electrical Technology VII: 698-706.

• Laan N., de Bruin KG., Slenter D., Wilhelm J., Jermy M. and Bonn D. (2015) Bloodstain Pattern Analysis: implementation of a fluid dynamic model for position determination of victims. Scientific Reports 5 11461 http://dx.doi.org/10.1038/srep11461.

• Lazarjan MS., Geoghegan PH., Taylor MC. and Jermy MC. (2015) Visualization of the air ejected from the temporary cavity in brain and tissue simulants during gunshot wounding. Forensic Science International 246: 104-109. http://dx.doi.org/10.1016/j.forsciint.2014.11.005.

• Underwood L., Jermy M., Eloi P. and Cornillon G. (2015) Helmet position, ventilation holes and drag in cycling. Sports Engineering 18(4): 241-248. http://dx.doi.org/10.1007/s12283-015-0181-7.

• Ahmed G., Sellier M., Jermy M. and Taylor M. (2014) Modelling the effects of contact angle hysteresis on the sliding of a droplet down an inclined surface. European Journal of Mechanics - B/Fluids 48: 218-230.

• Jermy MC., Burgess A., Feasey C., Lensen M., Willis C., Tucker AS. and Syme RWG. (2014) A variable drag coefficient, spatially extended numerical model of hammer throws and new wind tunnel data on current hammers. Sports engineering 17: 151-164. http://dx.doi.org/10.1007/s12283-014-0150-6.

• Kabaliuk N., Jermy MC., Williams E., Laber TL. and Taylor MC. (2014) Experimental validation of a numerical model for predicting the trajectory of blood drops in typical crime scene conditions, including droplet deformation and breakup, with a study of the effect of indoor air currents and wind on typical spatter drop trajectories. Forensic Science International 245: 107-120. http://dx.doi.org/10.1016/j.forsciint.2014.10.020.

• Lazarjan MS., Geoghegan PH., Jermy MC. and Taylor M. (2014) Experimental investigation of the mechanical properties of brain simulants used for cranial gunshot simulation. Forensic Science International 239: 73-78. http://dx.doi.org/10.1016/j.forsciint.2014.03.022.

• Underwood L. and Jermy M. (2014) Determining optimal pacing strategy for the track cycling individual pursuit event with a fixed energy mathematical model. Sports Engineering 17: 183-196. http://dx.doi.org/10.1007/s12283-014-0153-3.

• Ahmed GA., Sellier M., Lee YC., Jermy MC. and Taylor MC. (2013) Modelling the spreading and sliding of power-law droplets. Colloids and Surfaces A: Physicochemical and Engineering Aspects 432: 2-7. http://dx.doi.org/10.1016/j.colsurfa.2013.05.015.

• Geoghegan PH., Buchmann NA., Soria J. and Jermy MC. (2013) Time-resolved PIV measurements of the flow field in a stenosed, compliant arterial model. Experiments in Fluids 54: 1528. http://dx.doi.org/10.1007/s00348-013-1528-0.

• Kabaliuk N., Jermy MC., Morison K., Stotesbury T., Taylor MC. and Williams E. (2013) Blood drop size in passive dripping from weapons. Forensic Science International 228(1-3): 75-82. http://dx.doi.org/10.1016/j.forsciint.2013.02.023.

• Lim CW., Smith MR., Cave HM., Jermy MC., Wu JS. and Krumdieck SP. (2013) The direction decoupled Quiet Direct Simulation method for rapid simulation of axisymmetric inviscid unsteady flow in Pulsed Pressure Chemical Vapour Deposition. Computers and Fluids 86: 14-27. http://dx.doi.org/10.1016/j.compfluid.2013.07.012.

• Mohamad TI., Jermy M. and Harrison M. (2013) Experimental Investigation of a Gasoline-to-LPG Converted Engine Performance at Various Injection and Cylinder Pressures With Respect to Propane Spray Structures. Applied Mechanics and Materials 315: 20-24. http://dx.doi.org/10.4028/www.scientific.net/AMM.315.20.

• Underwood L. and Jermy M. (2013) Optimal handlebar position for track cyclists. Sports Engineering 16(2): 81-90. http://dx.doi.org/10.1007/s12283-013-0111-5.

• Geoghegan PH., Buchmann NA., Spence CJT., Moore S. and Jermy M. (2012) Fabrication of rigid and flexible refractive index matched flow phantoms for flow visualisation and optical flow measurements. Experiments in Fluids 52(5): 1331-1347. http://dx.doi.org/10.1007/s00348-011-1258-0.

• Mohamad TI., Jermy M., Vuorenkoski AK. and Harrison M. (2012) The effects of propane and gasoline sprays structures from automotive fuel injectors under various fuel and ambient pressures on engine performance. World Applied Sciences Journal 18(3): 396-403.

• Spence CJT., Buchmann NA. and Jermy MC. (2012) Unsteady flow in the nasal cavity with high flow therapy measured by stereoscopic PIV. Experiments in Fluids 52(3): 569-579. http://dx.doi.org/10.1007/s00348-011-1044-z.

• Buchmann NA., Atkinson C., Jermy MC. and Soria J. (2011) Tomographic particle image velocimetry investgation of the flow in a modeled human carotid artery bifurcation. Experiments In Fluids 50(4): 1131-1151. http://dx.doi.org/10.1007/s00348-011-1042-1.

• Ho WH., Gilmore J. and Jermy M. (2011) Reduction of Engine Exhaust Noise in a Jet Engine Test Cell. Noise Control Engineering Journal 59(2): 194-201.

• Spence CJT., Buchmann NA., Jermy MC. and Moore SM. (2011) Stereoscopic PIV Measurements of Flow in the Nasal Cavity with High Flow Therapy. Experiments in Fluids 50(4): 1005-1017. http://dx.doi.org/10.1007/s00348-010-0984-z.

• Su CC., Tseng KC., Wu JS., Cave HM., Lian YY. and Jermy MC. (2011) Two-level Virtual Mesh Refinement Algorithm in a Parallelized DSMC Code Using Unstructured Grids. Computers and Fluids 48(1): 113-124. http://dx.doi.org/10.1016/j.compfluid.2011.04.002.

• Underwood L., Schumacher J., Burette-Pommay J. and Jermy M. (2011) Aerodynamic drag and biomechanical power of a track cyclist as a function of shoulder and torso angles. Journal of Sports Engineering 14(2-4): 147-154. http://dx.doi.org/10.1007/s12283-011-0078-z.

• Buchmann NA., Yamamoto M., Jermy MC. and David T. (2010) Particle Image Velocimetry (PIV) and Computational Fluid Dynamics (CFD) Modelling of Carotid Artery Haemodynamics under Steady Flow: A Validation Study. Journal of Biomechanical Science and Engineering 5(4): 421-426. http://dx.doi.org/10.1299/jbse.5.421.

• Jermy MC., Mohamad T., Yusoff A. and Abdullah S. (2010) The Combustion and Performance of a Converted Direct Injection Compressed Natural Gas Engine using Spark Plug Fuel Injector. Sae Technical Paper Series 2010-32-0078 http://dx.doi.org/10.4271/2010-32-0078.

• Macphee JM., Sellier M., Jermy M. and Tadulan E. (2010) Combustion modelling of a rotary limekiln. Progress in Computational Fluid Dynamics 10(5/6): 384-393. http://dx.doi.org/10.1504/PCFD.2010.035372.

• Mohamad TI., Harrison M., Jermy M. and How HG. (2010) The structure of the high-pressure gas jet from a spark plug fuel injector for direct fuel injection. Journal of Visualization 13(2): 121-131. http://dx.doi.org/10.1007/s12650-009-0017-2.

• Su CC., Tseng KC., Cave HM., Lian YY., Kuo TC., Jermy MC. and Wu JS. (2010) Implementation of a Transient Adaptive Sub-Cell Module for the Parallel DSMC Code Using Unstructured Grids. Computers and Fluids 39(7): 1136-1145. http://dx.doi.org/10.1016/j.compfluid.2010.02.003.

• Buchmann NA., Jermy MC. and Nguyen CV. (2009) Experimental investigation of carotid artery haemodynamics in an anatomically realistic model. International Journal of Experimental and Computational Biomechanics 1(2): 172-192. http://dx.doi.org/10.1504/IJECB.2009.029192.

• Smith MR., Cave HM., Wu JS., Jermy MC. and Chen YS. (2009) An improved Quiet Direct Simulation method for Eulerian fluids using a second-order scheme. Journal of Computational Physics 228(6): 2213-2224. http://dx.doi.org/10.1016/j.jcp.2008.12.013.

• Cave HM., Krumdieck SP. and Jermy MC. (2008) Development of a Model for High Precursor Conversion Efficiency Pulsed-Pressure Chemical Vapor Deposition (PP-CVD) Processing. Chemical Engineering Journal 135(1-2): 120-128.

• Cave HM., Tseng KC., Wu JS., Jermy MC., Huang JC. and Krumdieck SP. (2008) Implementation of unsteady sampling procedures for the parallel direct simulation Monte Carlo method. Journal of Computational Physics 227(12): 6249-6271. http://dx.doi.org/10.1016/j.jcp.2008.03.015.

• Ho WH., Jermy M. and Dumbleton H. (2008) Formation of Sink Vortices in a Jet Engine Test Cell. Engineering Letters 16(3): 406-411.

• Jermy M. and Ho WH. (2008) Location of the vortex formation threshold at suction inlets near ground planes by computational fluid dynamics simulation. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 222(3): 393-402. http://dx.doi.org/10.1243/09544100JAERO265.

• Jermy M., Moore J. and Bloomfield M. (2008) Translational and rotational aerodynamic drag of composite construction bicycle wheels. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology 222(2): 91-102. http://dx.doi.org/10.1243/17543371JSET17.

• Krumdieck SP., Cave HM., Baluti S., Jermy M. and Peled A. (2007) Expansion transport regime in pulsed-pressure chemical vapor deposition. Chemical Engineering Science 62(22): 6121-6128. http://dx.doi.org/10.1016/j.ces.2007.07.003.

• Krumdieck SP., Cave HM., Baluti S., Jermy M. and Peled A. (2007) Expansion transport regime in pulsed-pressure chemical vapour deposition. Chemical Engineering Science 62(22): 6121-6128. http://dx.doi.org/10.1016/j.ces.2007.07.003.

• Berrocal E., Churmakov DY., Romanov VP., Jermy MC. and Meglinski IV. (2005) Crossed source-detector geometry for a novel spray diagnostic: Monte Carlo simulation and analytical results. Applied Optics 44(13): 2519-2529.

• Berrocal E., Meglinski I. and Jermy M. (2005) New model for light propagation in highly inhomogeneous polydisperse turbid media with applications in spray diagnostics. Optics Express 13(23): 9181-9195.

• Meglinski IV., Romanov VP., Churmakov DY., Berrocal E., Jermy MC. and Greenhalgh DA. (2004) Low and high order light scattering in particulate media. Laser Physics Letters 1(8): 387-390.

• Jermy MC., Hussain M. and Greenhalgh DA. (2003) Operating liquid-fuel airblast injectors in low pressure test rigs: strategies for scaling down the flow conditions. Measurement Science and Technology 14(7): 1151-1158.

• Jermy M. (2002) An economical droplet fog generator suitable for laser Doppler anemometry and particle imaging velocity seeding. Experiments in Fluids 33(2): 321-322.

• Jermy MC. and Allen A. (2002) Simulating the effects of multiple scattering on images of dense sprays and particle fields. Applied Optics 41(20): 4188-4196.

• Jermy MC. and Greenhalgh DA. (2000) Planar dropsizing by elastic and fluorescence scattering in sprays too dense for phase Doppler measurement. Applied Physics B: Lasers and Optics 71(5): 703-710.

• Jermy MC., Kelman JB., Sherwood G., O'Young F., Berckmuller M. and Masri AR. (2000) Pulsed laser imaging in practical combustion systems from 2D to 4D. Proceedings of SPIE - The International Society for Optical Engineering 4076: 55-65.

• Greaves GN., Chadwick AV., Jermy MC., Smith ME. and Zhu R. (1998) Changing Debye-Waller factors in mixed alkali KxCs(1-x)Si2O5 glasses. Journal of Non-Crystalline Solids 235-237: 766-771. http://dx.doi.org/10.1016/S0022-3093(98)00627-9.

• Jermy MC., Greaves GN., Smith ME., Bushnell-Wye G., Hannon AC., McGreevy RL., Derst G. and Tilley B. (1996) Evidence for the compensated continuous random network model for spodumene glass and analogues. Materials Science Forum 228-231(PART 2): 537-542. http://dx.doi.org/10.4028/www.scientific.net/msf.228-231.537.

• Ali F., Chadwick AV., Greaves GN., Jermy MC., Ngai KL. and Smith ME. (1995) Examination of the mixed-alkali effect in (Li,Na) disilicate glasses by nuclear magnetic resonance and conductivity measurements. Solid State Nuclear Magnetic Resonance 5(1): 133-143. http://dx.doi.org/10.1016/0926-2040(95)00033-M.

• Lebech B., Harris P., Skov Pedersen J., Mortensen K., Gregory CI., Bernhoeft NR., Jermy M. and Brown SA. (1995) Magnetic Phase Diagram of MnSi. Journal of Magnetism and Magnetic Materials 119: 140-144.

Chapters

• Jermy M., Knock C., Michielsen S., Rough R., de Castro T., Dicken L. and Brutin D. (2021) Drying Processes in the Formation of Bloodstains at Crime Scenes. In Jermy M (Ed.), Drying of Complex Fluid Drops Fundamentals and ApplicationsISSN.

• Kieser D., Carr D., Jermy M., Mabbott A. and Kieser J. (2016) Injury Biomechanics. In Freeman (Ed.), Forensic Epidemiology: Principles and Practice: 201-230.Elsevier.

• Jermy MC. and Taylor MC. (2013) The mechanics of bloodstain pattern formation. In Kieser J; Taylor MC; Carr D (Ed.), Forensic Biomechanics: 99-136. New York: Wiley.

• Greenhalgh DA. and Jermy MC. (2002) Laser Diagnostics for droplet measurements for the study of fuel injection and mixing in gas turbines and i.c. engines. In Kohse-Hoeinghaus K; Jeffries J (Ed.), Applied Combustion Diagnostics: 408-430. New York: Taylor and Francis.

Conference Contributions - Published

• Chen S., Horner R., Suckling M., Strand T. and Jermy M. (2020) Modelling of pheromone flow from insect traps. In Australasian Fluid Mechanics Conference (AFMC) The University of Queensland. http://dx.doi.org/10.14264/c6c8802.

• Chyrva I., Kabaliuk N., Dunker C., Strand T., Geoghegan P. and Jermy M. (2020) Stereo PIV study of multirotor UAV downwash and spray dispersion. In Australasian Fluid Mechanics Conference (AFMC) The University of Queensland. http://dx.doi.org/10.14264/a7c3944.

• Scheunemann P., Schadow D., Stephenson P. and Jermy M. (2020) Aerosol Generation by Condensation in Laminar Boundary Layers for Inhalers. In Australasian Fluid Mechanics Conference (AFMC) The University of Queensland. http://dx.doi.org/10.14264/da61a47.

• Williamson P., Docherty P., Yazdi S., Jermy M., Khanafer A., Kabaliuk N. and Geoghegan P. (2019) PIV Analysis of Stented Haemodynamics in the Descending Aorta. In Dossel O (Eds). EMBC 2019 Proceedings: 4737-4740. http://dx.doi.org/10.1109/EMBC.2019.8856823.

• Chen S., Brown K. and Jermy M. (2018) An explanation for the unexpected interactions of silica nanoparticles using the soft particle model. In.

• Chen S., Brown K. and Jermy M. (2018) Modelling of in situ silica particle growth and its deposition under geothermal conditions. In.

• Chen S., Brown K. and Jermy M. (2018) Predictions of average silica particle size over time under geothermal conditions. In.

• Jermy M., Geoghegan P., Buchajczyk M., Spence C. and Aplin J. (2018) SPIV analysis of airflow in the neonatal upper airway during maximal effort breathing. In LXLASER2018 Proceedings: 17.

• Yazdi S., Docherty P., Khanafer A., Jermy M., Geoghegan P., Kabaliuk N. and Williamson P. (2018) The flow field in compliant and rigid models of the human aortic arch. In LXLASER2018 Proceedings: 13.

• Chen S., Brown K. and Jermy M. (2017) A model of silica colloid growth, stability and transport used to predict geothermal reinjection lifetime. In 39th New Zealand Geothermal Workshop.

• Adams C., Geoghegan P., Jermy MC. and Spence C. (2016) Effect of Nasal High Flow Therapy on CO2 Tension- Physico-mathematical Modelling. In.

• Aplin J., Geoghegan PH., Spence CJT., Kabaliuk N. and Jermy MC. (2016) SPIV of natural breathing in Neonatal Airways. In.

• Buchajczyk M., Geoghegan P., Kabaliuk N., Adams C., Spence C. and Jermy M. (2016) Experimental investigation of airway pressures in human airway models with compliant components. In Proceedings of the 20th Australasian Fluid Mechanics Conference, AFMC 2016.

• Buchajczyk M., Geoghegan P., Kabaliuk N., Adams C., Spence C. and Jermy M. (2016) Experimental investigation of airway pressures in human airway models with compliant components. In Proceedings of the 20th Australasian Fluid Mechanics Conference, AFMC 2016.

• Buchajczyk M., Geoghegan PH., Kabaliuk N., Adams C., Spence CJT. and Jermy MC. (2016) Experimental Investigation of Airway Pressures in Human Airway Models with Compliant Components. In.

• Buchajczyk M., Kabaliuk N., Geoghegan P., Jermy M., Adams C. and Spence C. (2016) Polymer Models of the Human Upper Airways with Soft Compliant Components. In http://people.eng.unimelb.edu.au/imarusic/proceedings/20%20AFMC%20TOC.htm.

• Geoghegan PH., Docherty PD. and Jermy MC. (2016) Understanding Arterial Pressure from PIV data. In.

• Jermy MC., Nejati AJ. and Cater JE. (2016) Flow in a Human Nasal Cavity Obtained by Improved Shape Standardization. In Yes.

• Pancholy PP., Clemens K., Geoghegan P., Jermy M., Moyers-Gonzalez M. and Wilson PL. (2016) Numerical study of flow pattern and pedestrian level wind comfort inside a uniform street canyon at different angles of attack. In http://people.eng.unimelb.edu.au/imarusic/proceedings/20%20AFMC%20TOC.htm: 4.

• Aplin J., Geoghegan PH., Spence CJT., Kabaliuk N. and Jermy MC. (2015) Stereoscopic PIV measurements of the Natural Breath Cycle in a Neonate Nasal Cavity. In Proceedings ACLDFMC2015: 121-126.

• Flint T., Ho WH., New TH. and Jermy M. (2015) Validated Unsteady Computational Fluid Dynamic Analysis of an Oscillating Bio-Inspired Aerofoil. In.

• Huetter L., Geoghegan PH., Docherty PD., Lazarjan MS., Clucas D. and Jermy MC. (2015) Application of a meta-analysis of aortic geometry to the generation of a compliant phantom for use in particle image velocimetry experimentation. In Proceedings of the 9th IFAC Symposium on Biological and Medical Systems: 6pp.

• Siwach S., Jermy M. and Sellier M. (2015) Design of Pentane Vaporizers - A CFD Approach. In.

• Geoghegan PH. and Jermy MC. (2014) Flow dynamics and wall shear stress downstream of a stenosis in a compliant blood vessel. In.

• Geoghegan PH., Spence CJT., Kabaliuk N., Aplin J., Wilhelm J., Taylor MC. and Jermy MC. (2014) Tracking Blood Drops Ejected from the Nasal Cavity during Violent Assault. In.

• Geoghegan PH., Spence CJT., Kabaliuk N., Wilhelm J., Aplin J., Taylor MC. and Jermy MC. (2014) The flow field external to the human nose and the acceleration of blood drops from the nasal cavity during violent assault. In.

• Jermy MC. and Siwach S. (2014) Design of a Test Rig to Improve Thermal Design Approach for Evaporators for Organic Rankine Cycle Power Plant. In Yes.

• Jermy MC., Kokhanenko P. and Brown K. (2014) Hydro- and Electrochemical Aspects of Silica Colloid Deposition from a Turbulent Flow onto a Rough Wall. In Yes.

• Jermy MC., Kokhanenko. and Brown K. (2014) Experimental And Theoretical Observations Of Scaling Rate And Implications For Anti-Scaling Practises. In Yes.

• Lazarjan MS., Geoghegan PH., Taylor MC. and Jermy MC. (2014) Feature tracking to estimate the velocity of air ejected from the temporary cavity during cranial gunshot wounding. In.

• Lazarjan MS., Geoghegan PH., Taylor MC. and Jermy MC. (2014) Formation of Back-Spattered Bloodstain Patterns: Air flow Visualisation and form of the Damage in a Brain Tissue Simulant. In.

• Ahmed G., Sellier M., Lee YC., Jermy MC. and Taylor MC. (2013) Modeling the spreading and sliding of power-law fluid droplets. In Colloids and Surfaces A: Physicochemical and Engineering Aspects 432: 2-7.

• Jermy MC. (2013) Making it clear: flexible, transparent laboratory flow models for soft and hard problems. In.

• Kokhanenko P., Brown K. and Jermy M. (2013) Hydrodynamic particle transport in silica scale deposition. In.

• Geoghegan PH., Buchmann NA., Soria J. and Jermy M. (2012) High-speed LED-illuminated PIV measurements of the time-dependent flow field in a stenosed, compliant arterial model. In.

• Geoghegan PH., Spence CJT., Ho WH., Lu XB., Jermy M., Hunter PJ. and Cater JE. (2012) Stereoscopic PIV measurement of airflow in human speech during pronunciation of fricatives. In.

• Kokhanenko P., Masuri S., Jermy M., Sellier M. and Brown K. (2012) Hydrodynamics and electrochemistry of silica scaling. In.

• Cave HM., Lim CW., Jermy MC., Krumdieck SP., Smith MR., Lin YJ. and Wu JS. (2011) Multi-Species Fluxes for the Parallel Quiet Direct Simulation (QDS) Method. In AIP Conference Proceedings 1333: 878-883. http://dx.doi.org/10.1063/1.3562756.

• Ho WH. and Jermy M. (2011) Effect of turbulence intensity on vortex formation threshold in a jet engine test cell. In Proceedings - 25th European Conference on Modelling and Simulation, ECMS 2011: 231-236. http://dx.doi.org/10.7148/2011-0231-0236.

• Ho WH. and Jermy MC. (2011) Effect of Turbulence Intensity on Vortex Formation Threshold in a Jet Engine Test Cell. In Proceedings: 6pp.

• Journee M., Chen XQ., Robertson J., Jermy M. and Sellier M. (2011) An investigation into improved non-contact adhesion mechanism suitable for wall climbing robotic applications. In : 4915-4920. http://dx.doi.org/10.1109/ICRA.2011.5979842.

• Lim CW., Cave HM., Jermy MC., Krumdieck SP. and Wu JS. (2011) An approximate method for solving unsteady transitional and rarefied flow regimes in PP-CVD using the QDS method. In AIP Conference Proceedings 1333: 1039-1044. http://dx.doi.org/10.1063/1.3562782.

• Su CC., Hsieh CW., Smith MR., Jermy MC. and Wu JS. (2011) Parallel Direct Simulation Monte Carlo Computation using CUDA on GPUs. In AIP Conference Proceedings 1333: 343-347. http://dx.doi.org/10.1063/1.3562672.

• Underwood L. and Jermy MC. (2011) Fabric testing for cycling skinsuits. In Procedia Engineering 13: 350-356. http://dx.doi.org/10.1016/j.proeng.2011.05.097.

• Buchmann NA. and Jermy MC. (2010) Transient flow and shear stress measurements in an anatomical model of the human carotid artery. In Proceedings.

• Burden J., Cleland M., Conway M., Falconer M., Green R., Chase JJG., Hann C., Jermy M. and Palmer C. (2010) Tracking a single cyclist during a team changeover on a velodrome track with Python and OpenCV. In Procedia Engineering: The Engineering of Sport 8 - Engineering Emotion 2: 2931-2935. http://dx.doi.org/10.1016/j.proeng.2010.04.090.

• Geoghegan PH., Buchmann NA., Jermy MC., Nobes D., Spence CJT. and Docherty PD. (2010) SPIV and image correlation measurements of surface displacement during pulsatile flow in models of compliant, stenosed arteries. In Proceedings.

• Jermy MC., Lim CW. and Cave HM. (2010) Validity and inherent viscosity of the Quiet Direct Simulation (QDS) Method. In AIP Conference Proceedings 1333: 902-909. http://dx.doi.org/10.1063/1.3562760.

• Krumdieck S., Siriwongrunson V., Lim CW., Hadley Cave MJ., Pons D. and Alkaisi M. (2010) Scale-up for industry application, and up-scale for three-dimensions:process design study for Pulsed-Pressure MOCVD. In.

• Mohamad TI., Yusoff A., Abdullah S., Jermy M., Harrison M. and Geok HH. (2010) The combustion and performance of a converted direct injection compressed natural gas engine using spark plug fuel injector. In SAE Technical Papers http://dx.doi.org/10.4271/2010-32-0078.

• Smith MR., Kuo FA., Cave HM., Jermy MC. and Wu JS. (2010) Quiet Direct Simulation of Viscous Flow using the Chapman-Enskog Distribution. In AIP Conference Proceedings 1333: 992-997. http://dx.doi.org/10.1063/1.3562775.

• Spence CJT., Buchmann NA. and Jermy MC. (2010) Pulsatile flow in the nasal cavity with high flow therapy measured by stereoscopic PIV. In.

• Underwood L. and Jermy M. (2010) Mathematical model of track cycling: the individual pursuit. In Procedia Engineering 2(2): 3217-3222. http://dx.doi.org/10.1016/j.proeng.2010.04.135.

• Underwood L. and Jermy M. (2010) Optimal hand position for individual pursuit athletes. In.

• Buchmann N., Atkinson C., Jermy MC. and Soria J. (2009) Tomographic PIV investigation of the three dimensional flow structure in the human carotid artery. In.

• Buchmann NA. and Jermy MC. (2009) In-vitro blood flow and wall shear stress measurements in idealised and patient specific models of the carotid artery bifurcation. In Proceedings of the ASME Summer Bioengineering Conference, SBC2008(PART B): 723-724.

• Buchmann NA., Atkinson CH., Jermy MC. and Soria J. (2009) In-vitro investigation of three-dimensional carotid artery haemodynamics by tomographic particle image velocimetry. In IFMBE Proceedings 25(4): 1665-1668. http://dx.doi.org/10.1007/978-3-642-03882-2_441.

• Buchmann NA., Atkinson CH., Jermy MC. and Soria J. (2009) In-vitro investigation of three-dimensional carotid artery haemodynamics by tomographic particle image velocimetry. In IFMBE Proceedings 25(4): 1665-1668. http://dx.doi.org/10.1007/978-3-642-03882-2_441.

• Cave H., Lim CW., Jermy M., Wu JS., Smith M. and Krumdieck S. (2009) CVD flow field modelling using the quiet direct simulation (QDS) method. In ECS Transactions 25(8): 389-393. http://dx.doi.org/10.1149/1.3207617.

• Cave HM., Smith MR., Jermy MC. and Wu C. (2009) Gas dynamics simulations using the Quiet Direct Simulation method. In HPC Asia & APAN 2009 International Conference and Exhibition Proceedings: 534-659.

• Geoghegan PH., Jermy MC., Buchmann NA., Spence C. and Freitag T. (2009) Experimental investigation of flow in compliant tubes to validate numerical models of aneurysms. In.

• Geoghegan PH., Jermy MC., Buchmann NA., Spence CJ. and Freitag T. (2009) Experimental investigation of flow in a compliant tube using particle image velocimetry. In.

• Ho WH. and Jermy MC. (2009) Formation and Ingestion of Vortices Into Jet Engines During Operation. In IAENG Transactions on Engineering Technologies Volume 1: 132-143. http://dx.doi.org/10.1063/1.3078119.

• Jermy MC., Schulte T., Zainol Abidin Z., Geoghegan P., Cave HM. and Lim CW. (2009) Background oriented schlieren imaging on an unsteady underexpanded jet through a curved glass surface. In.

• Lim CW., Abidin ZZ., Cave HM., Jermy MC., Wu JS., Smith MR. and Krumdieck SP. (2009) Numerical simulations of unsteady inviscid flow using the Quiet Direct Simulation Method. In.

• Lim CW., Cave H., Jermy M. and Krumdieck S. (2009) Liquid droplet evaporation in simulations of the flow in pulsed-pressure MOCVD. In ECS Transactions 25(8): 1251-1255. http://dx.doi.org/10.1149/1.3207730.

• Macphee JE., Sellier M., Jermy M. and Tadulan E. (2009) CFD modeling of pulverized coal combustion in a rotary lime kiln. In.

• Spence CJT., Buchmann N. and Jermy MC. (2009) Flow field in the human nasal cavity with nasal high flow therapy from stereoscopic PIV measurements. In.

• Wu JS., Jermy MC. and Krumdieck SP. (2009) Quiet Direct Simulation (QDS). In.

• Cave HM., Jermy MC., Krumdieck SP., Tseng KC. and Wu JS. (2008) DREAM: An Efficient Methodology for DSMC Simulation of Unsteady Processes. In Rarefied Gas Dynamics: 335-340.

• Ho WH., Dumbleton H. and Jermy M. (2008) Effect of Upstream Velocity Gradient on the Formation of Sink Vortices in a Jet Engine Test Cell. In Proceedings of IMECS2008: 1767-1772.

• Jermy MC., Buchmann NA. and Spence CJT. (2008) In-vitro imaging of blood flow in human carotid arteries. In Yes.

• Jermy MC., Buchmann NA. and Spence CJT. (2008) PIV measurements of the flow field in a domestic kitchen oven as a function of temperature. In Yes.

• Jermy MC., David T. and Buchmann NA. (2008) Blood flow measurements in idealized and patient specific measurements of the human carotid artery. In Yes.

• Jermy MC., Spence CJT. and buchmann NA. (2008) Particle Image Velocimetry measurements of nasal cavity flow with high flow humidified nasal interface. In Yes.

• Tseng KC., Kuo TC., Cave HM., Jermy MC., Krumdieck SP. and Wu JS. (2008) Implementation of the Transient Adaptive Sub-Cell module for the Parallel DSMC code. In In Rarefied Gas Dynamics: 293-298.

• Buchmann NA. and Jermy MC. (2007) Particle Image Velocimetry Measurements of Blood Flow in a modeled Carotid Artery Bifurcation. In Proceedings of the 16th Australasian Fluid Mechanics Conference (AFMC): 60-67.

• Cave HM., Tseng KC., Wu JS., Jermy MC., Lian YY., Krumdieck SP., Kuo TC. and Wu MZ. (2007) Modelling Unsteady Processes with the Direct Simulation Monte Carlo Technique. In Proceedings of the 16th Australasian Fluid Mechanics Conference (AFMC): 1026-1032.

• Gilmore J. and Jermy M. (2007) CFD Study of Wake Decay and Separation Regions in Jet Engine Test Facilities. In Proceedings of the 16th Australasian Fluid Mechanics Conference (AFMC): 436-442.

• Hamm A., Krumdieck S. and Jermy M. (2007) Strategic Analysis of Continuity for Complex Energy and Environment Systems for Developing Regions. In Proceedings of the 2nd International Conference on Sustainability: 10pp.

• Hua HW. and Jermy M. (2007) Validated CFD Simulations of Vortex Formation in Jet Engine Test Cells. In Proceedings of the 16th Australasian Fluid Mechanics Conference (AFMC): 1102-1107.

• Jermy MC., Wu JS., Tseng KC., Cave H., Lian YY., Yu JP., Chen YS. and Krumdieck SP. (2007) Developing a General-Purpose Parallelized Direct Simulation Monte Carlo Code (PDSC) Using Unstructured Grid: A Progress Report. In.

• Spence CJT., Buchmann NA. and Jermy MC. (2007) Airflow in a Domestic Kitchen Oven Measured by Particle Image Velocimetry. In Proceedings of the 16th Australasian Fluid Mechanics Conference (AFMC): 1364-1368.

• Berrocal E., Jermy M. and Meglinski IV. (2006) New Monte Carlo model of laser radiation propagation in sprays, aerosols and other complex polydisperse turbid media. In Progress in Biomedical Optics and Imaging - Proceedings of SPIE 6163 http://dx.doi.org/10.1117/12.696931.

• Cave HM., Krumdieck SP. and Jermy MC. (2006) Development of a model for high precursor conversion efficiency pulsed-pressure chemical vapor deposition (PP-CVD) processing. In.

• Jermy MC., Cave H. and Krumdieck SP. (2006) Simulations of Reactor Efficiency for Pulsed Pressure Chemical Vapor Deposition (PP-CVD). In Yes.

• Berrocal E., Meglinski IV. and Jermy MC. (2005) Dense Spray Analysis Using Optical Measurements and Monte Carlo Simulation. In Paper 3B/1.

• Mohamad TI., Harrison M., Jermy M., Theodoridis E. and Dolinar A. (2005) Investigation of the Combustion and Performance of Methane Direct Injection in a Single Cylinder Engine Using Spark Plug Fuel Injector (SPFI) for Low Cost Conversion. In.

• Moukaideche F., Berrocal E., Greenhalgh DA. and Jermy MC. (2005) Experimental Measurement and Correction of Attenuation of Signal Light in Optical Characterization of Dense Sprays. In Paper 3B/3.

• Greenhalgh DA., Jermy MC., Doherty WG. and Hussain M. (2004) The response of fuel injector sprays to acoustic forcing. In Proceedings of the 7th Biennial Conference on Engineering Systems Design and Analysis 1: 513-520.

• Jermy MC., Berrocal E. and Moukaideche F. (2004) Errors in light sheet images of polydisperse sprays: Monte Carlo simulation of photon propagation. In Paper 6.3: 11pp.

• Jermy MC., Berrocal E. and Moukaideche F. (2004) Estimating the errors due to multiple scattering in spray imaging measurements: Experiments and simulation. In Proceedings ILASS Europe 2004 Paper P12.

• Jermy MC., Greenhalgh DA., Doherty WG. and Hussain M. (2004) The response of fuel injector sprays to acoustic forcing. In Proceedings ILASS Europe 2004 Paper P7.

• Jermy MC., Noël T. and Doherty WG. (2004) Laser induced fluorescence measurements of the thickness of fuel films on the combustion chamber surface of a gasoline SI engine. In Paper 17.2: 8pp.

• Jermy MC., Vuorenkoski AK., Mohamed TI., Kaparis E., Harrison M. and Macartney M. (2004) The structure of propane/LPG sprays from automotive fuel injectors as a function of fuel and ambient pressure by Mie and LIF imaging. In Paper 33.3: 12pp.

• Mohamad TI., Jermy M. and Harrison M. (2003) Direct Injection of Compressed Natural Gas in Spark Ignition Engines. In : 7pp.

• Jermy MC., Allen A. and Vuorenkoski AK. (2002) Simulating the effect of multiple scattering on images of dense sprays. In Optical and Laser Diagnostics: Proceedings of the First International Conference Institute of Physics Conference(Vol. 177): 89-94.

• Jermy MC., Doherty WG. and Greenhalgh DA. (2002) The response of fuel injector sprays to acoustic perturbation and their role in combustion instability. In Paper 28.3.

• Pierson S., Richardson SR., Jermy MC., Rubini P. and Greenhalgh DA. (2001) Laser Characterisation of a Port Fuel Injector to Provide Boundary Data for Computational Fluid Dynamics. In Computational and Experimental Methods in Reciprocating: Proceeding of the IMechE Conference: 167-176.

• Jeong KS., Jermy MC. and Greenhalgh DA. (2000) Laser Sheet Dropsizing in evaporating sprays using Laser Induced Exciplex Fluorescence. In CD-ROM Proceedings Paper 154: 9pp.

• Kelman JB., Sherwood G., O'Young F., Berckmueller M., Jermy MC., Masri AR. and Greenhalgh DA. (2000) Pulsed laser imaging in practical combustion systems from 2D to 4D. In Proceedings of SPIE: Optical Diagnostics for Industrial Applications Vol. 4076: 55-65.

• Jermy MC., Greaves GN., Smith ME., Ali F., Chadwick AV. and Ngai KL. (1995) Alkali distribution and dynamics in mixed alkali silicate glasses using NMR techniques. In Non-equilibrium phenomena in supercooled fluids, glasses and amorphous materials, World Scientific, London 1995 ISBN 981-02-2795-7.

Conference Contributions - Other

• Jermy M., Chyrva I. and Strand T. (2021) “Experimental investigation of upward velocity region between adjacent counter-rotating rotors using SPIV technique. Christchurch: Fluids in New Zealand 2021, 27 Jan-29 Jul 2021.

• Jermy M., Rough R., de Brink G., Curran JM. and Taylor M. (2020) Variables affecting the formation of cast-off spatter bloodstain patterns. Online: 2020 IABPA training conference, 16-20 Nov 2020.

• Chen S., Brown K. and Jermy M. (2019) Model ling the lifecycle of amorphous silica scaling during geothermal reinjection. Dunedin, NZ: 7th Fluids in New Zealand meeting, 31 Jan-1 Feb 2019.

• Chyrva I., Strand T. and Jermy M. (2019) Rotor-rotor interaction of remotely piloted multicopters and their influence on an on-board spraying system. Dunedin, NZ: 7th Fluids in New Zealand meeting, 31 Jan-1 Feb 2019.

• Docherty P., Sellier M., Geoghegan P., Yazdi S., Williamson P., Khanafer A., Kabaliuk N. and Jermy M. (2019) Integral-based reconstruction of static pressure in a compliant axisymmetric vessel using velocity field data from particle image velocimetry (PIV) analysis. Dunedin, NZ: 7th Fluids in New Zealand meeting, 31 Jan-1 Feb 2019.

• Geoghegan P., Van Steijn L., Van Zuijlen E., Taylor M. and Jermy M. (2019) Understanding the Difference Between Expirated and Impact Bloodstain Patterns. Baltimore, MD: American Academy of Forensic Sciences 71st Annual Scientific Meeting, 18-23 Feb 2019.

• Jermy M., Williamson P., Docherty P., Yazdi S., Kabaliuk N., Khanafer A. and Geoghegan P. (2019) In-Vitro PIV Analysis of Pulsatile Flow Distal of a Frozen Elephant Trunk Stent Phantom. Christchurch, New Zealand: 1st International Conference of Thermal Fluid Dynamics and Control and the 2nd International Symposium of Combustion Instability and Control, 2-6 Aug 2019.

• Longworth L., Post S., Hendrickson H., Steel J., Cannon E., Gleadow J. and Jermy M. (2019) Electrostatic spraying to increase efficiency and reduce pollution. Dunedin, NZ: 7th Fluids in New Zealand meeting, 31 Jan-1 Feb 2019.

• Yazdi S., Geoghegan P., Jermy M., Khanafer A. and Docherty P. (2019) In-vitro measurement of hemodynamics in rigid and compliant silicone replicas of aortic arch using stereoscopic particle image velocimetry. Dunedin, NZ: 7th Fluids in New Zealand meeting, 31 Jan-1 Feb 2019.

• Geoghegan P., Yazdi S., Docherty P. and Jermy M. (2018) Understanding Arterial Disease through Particle Image Velocimetry. Johannesburg, South Africa: 1st UNISA International Symposium of Biomechanics in Bio-Fluids and Soft Tissue Mechanics, 3-3 Apr 2018.

• Jermy M., Chen S. and Brown K. (2018) A simple model of silica colloid deposition in geothermal energy extraction systems. Auckland, New Zealand: Fluids in New Zealand, 8-9 Feb 2018.

• Jermy M., Geoghegan P., Kabaliuk N., Buchajczyk M., Adams C., Aplin J. and Spence C. (2018) Anatomically realistic models of the human upper airway for laboratory measurements of airway pressure and carbon dioxide mixing. Johannesburg, South Africa: 1st UNISA International Symposium of Biomechanics in Bio-Fluids and Soft Tissue Mechanics, 3-3 Apr 2018.

• Katurji M., Dunker C., Kabaliuk N., Jermy M., Satinsky A., Zawar-Reza P. and Zhang J. (2018) Time sequential thermography for spatial turbulence measurements. Christchurch, New Zealand: NZ Hydrological & NZ Meteorological Society Joint Conference, 4-7 Dec 2018.

• Oudeslujis M., Rough R., Jermy M., Curran J. and Taylor M. (2018) Variables affecting the formation of impact spatter bloodstain patterns. Ottawa, Canada: IABPA conference, 1-4 Oct 2018.

• Pancholy PP., Geoghegan P., Jermy M., Moyers Gonzalez M. and Wilson PL. (2018) Numerical Study of the Impact of Rooftop Panels on Pedestrian Comfort. Auckland, New Zealand: Fluids in New Zealand, FiNZ Conference, 8-9 Feb 2018.

• Post S., Jermy M., Kabaliuk N., McNearney E. and Gaynor P. (2018) Real-time control of spray drop application. Montreal, Canada: 14th International Conference on Precision Agriculture, 24-27 Jun 2018.

• Tshimanga IJ., Ho WH., Ngoepe M., Jermy M. and Geoghegan P. (2018) Development of 3D Printed Models for Arterial Disease Investigation. London, UK: BioMedEng18, 6-7 Sep 2018.

• Yazdi S., Docherty P., Jermy M. and Geoghegan P. (2018) Stereo-PIV measurement of aortic arch hemodynamics in rigid and compliant phantoms. Auckland, NZ: Fluids in New Zealand, 8-9 Feb 2018.

• Jermy M., Siwach S., Zwaan P. and Hanger C. (2017) Lower Impact Flooring: Can we reduce impact forces without increasing rolling resistance. Wellington, NZ: Human Factors and Ergonomics Society of NZ Conference, 7-9 Sep 2017.

• Pancholy PP., Clemens K., Geoghegan P., Jermy M., Moyers Gonzalez M. and Wilson PL. (2017) Numerical Study of Flow Pattern and Pedestrian Level Wind Comfort Inside a Uniform Street Canyon at Different Angles of Attack. Christchurch, New Zealand: Fluids in New Zealand 2017, 9-10 Feb 2017.

• Adams C., Geoghegan P. and Jermy M. (2016) Effect of nasal high flow therapy on work of breathing and CO2 flushing: physico-mathematical modelling approach. Auckland, New Zealand: Fluids in New Zealand, 26-27 Jan 2016.

• Buchajczyk M., Geoghegan P., Spence CJT. and Jermy M. (2016) The effect of compliance in the upper airway. Auckland, New Zealand: Fluids in New Zealand, 26-27 Jan 2016.

• Clemens K., Geoghegan P. and Jermy M. (2016) Aerodynamics of asymmetric land speed record electric vehicles. Auckland, New Zealand: Fluids in New Zealand, 26-27 Jan 2016.

• Dhandu S. and Jermy M. (2016) Lift, drag and thrust of a synthetic dragonfly wing. Auckland, New Zealand: Fluids in New Zealand, 26-27 Jan 2016.

• Geoghegan P., Docherty P. and Jermy M. (2016) Getting to the heart of the problem. Auckland, New Zealand: Fluids in New Zealand, 26-27 Jan 2016.

• Kabaliuk N., Geoghegan P. and Jermy M. (2016) 3D printed polymer models of the oral and nasal cavities used to probe the role of the mouth in CO2 clearance in breathing. Plant and Food Research, Lincoln, New Zealand: Biomouth, 7-8 Mar 2016.

• Kabaliuk N., Nejati A., Cater J. and Jermy M. (2016) 3D upper airway models for flow measurements. Auckland, New Zealand: Fluids in New Zealand, 26-27 Jan 2016.

• Pancholy P., Wilson P., Moyers-Gonzalez M., Jermy M. and Geoghegan P. (2016) Street canyon and comfort criteria. Auckland, New Zealand: Fluids in New Zealand, 26-27 Jan 2016.

• Siwach S., Sellier M. and Jermy M. (2016) Design of pentane vaporizer - a CFD approach. Auckland, New Zealand: Fluids in New Zealand, 26-27 Jan 2016.

• Wilson PL., Pancholy PP., Geoghegan P., Jermy MC. and Moyers-Gonzalez M. (2016) When the wind blows: a numerical study of wind flow and pedestrian comfort in urban street canyons. Wellington, New Zealand: New Zealand Mathematical Society Colloquium, 5-8 Dec 2016.

• Jermy M., Stotesbury T., Hinton E., Taylor M., Sellier M., Geoghegan P., Williams L., Dodds M., Soltanipour Lazarjan M. and Kabaliuk N. (2015) Blood-mimicking fluids for forensic science: matching non-Newtonian viscosity and stickiness. Christchurch, New Zealand: Fluids in New Zealand 2015 (FiNZ), 28-30 Jan 2015.

• Pancholy P., Wilson P., Moyers-Gonzalez M., Jermy M. and Geoghegan P. (2015) Street Canyon and Comfort Criteria. University of Canterbury, Christchurch, New Zealand: New Zealand Mathematical Society Colloquium (NZMS), 1-3 Dec 2015.

• Roberts S., O'Donnell J., Spence CJ., Jermy MC. and Kabaliuk N. (2015) Nasal High Flow Therapy and dispersion of nasal aerosols in an experimental setting. Seoul, Korea: World Congress of Intensive and Critical Care Medicine, 29 Aug-1 Sep 2015.

• Kokhanenko P., Brown K. and Jermy M. (2014) Experimental And Theoretical Observations Of Scaling Rate And Implications For Anti-Scaling Practises. Auckland, New Zealand: 36th New Zealand Geothermal Workshop (NZGW), 24-26 Nov 2014.

• Kokhanenko P., Brown K. and Jermy M. (2014) Hydro- and Electrochemical Aspects of Silica Colloid Deposition from a Turbulent Flow onto a Rough Wall. Melbourne, Australia: 19th Australasian Fluid Mechanics Conference, 8-11 Dec 2014.

• Lazarjan MS., Geoghegan PH., Taylor MC. and Jermy MC. (2014) Realistic simulant for human brain at ballistic range of impact. Adelaide, Australia: Australian and New Zealand Forensic Science Society 22nd International Symposium on the Forensic Sciences (ANZFSS), 31 Aug-4 Sep 2014.

• Oldfield S., Spence CJT., Storey J., Jermy MC. and Cater JE. (2014) Modelling CO2 Distribution in Patient Airways using Computational Fluid Dynamics. Melbourne, Australia: 19th Australasian Fluid Mechanics Conference, 8-11 Dec 2014.

• Siwach S. and Jermy M. (2014) Design of a Test Rig to Improve Thermal Design Approach for Evaporators for Organic Rankine Cycle Power Plant. Melbourne, Australia: 19th Australasian Fluid Mechanics Conference, 8-11 Dec 2014.

• Taylor M., Skrebutenas R., Lazarjan M., Geoghegan P. and Elliot D. (2014) The use of a novel physical model for gunshot-related blood spatter simulation. Adelaide, Australia: Australian and New Zealand Forensic Science Society 22nd International Symposium on the Forensic Sciences (ANZFSS), 31 Aug-4 Sep 2014.

• Ahmed G., Sellier M., Jermy M. and Taylor M. (2013) Effect of rheology on droplet spreading and it's consequences for blood. Sir John Walsh School of Dentistry, University of Otago, Dunedin: Forensic Biomechanics Symposium, 13-13 Mar 2013.

• Kabaliuk N., Jermy M., Taylor M. and Sellier M. (2013) Computational modelling of blood drop flight: Does deformation of spatter affect droplet trajectory? Sir John Walsh School of Dentistry, University of Otago, Dunedin: Forensic Biomechanics Symposium, 13-13 Feb 2013.

• Kabaliuk N., Jermy MC., Taylor MC. and Geoghegan PH. (2013) Does the non-spherical shape of a spatter drop affect its trajectory? San Diego, CA, USA: IABPA Training Conference, 1-4 Oct 2013.

• Lazarjan MS., Geoghegan PH., Jermy MC. and Taylor M. (2013) Developing a realistic simulant for human brain for cranial gunshot reconstruction. Lincoln University, Christchurch, New Zealand: ESR conference, 3-5 Dec 2013.

• Lazarjan MS., Geoghegan PH., Jermy MC., Taylor MC. and Ho WH. (2013) Experimental investigation into the mechanical properties of brain simulants used for cranial gunshot simulation, and airflow ejection during collapse of the temporary cavity. San Diego, CA, USA: IABPA Training Conference, 1-4 Oct 2013.

• Sellier M., Ahmed G., Baechtel G., Jermy MC. and Taylor MC. (2013) Modelling bloodstain formation - from impact to spreading. San Diego, CA, USA: IABPA Training Conference, 1-4 Oct 2013.

• Soltanipour Lazarjan M., Jermy M., Taylor M. and Ho WH. (2013) Development of a realistic simulant for the human brain during gunshot wounding. Sir John Walsh School of Dentistry, University of Otago, Dunedin: Forensic Biomechanics Symposium, 13-13 Mar 2013.

• Stotesbury T., Taylor M., Jermy M., Illes M., Vregdenhill A. and Wilson P. (2013) From Liquid Honey to Silicon Colloid Chemistry: Creating and Assessing Synthetic Blood Substitutes Useful to the Forensic Sciences. San Diego, CA, USA: IABPA Training Conference, 1-4 Oct 2013.

• Jermy M., Sixdeniers M., Moulun O. and Poulet G. (2012) Design of a repeatable impact machine for creating artificial blood spatter patterns. Dunedin, New Zealand: Forensic Biology Symposium, 22-22 Feb 2012.

• Kabaliuk N., Jermy M. and Taylor M. (2012) Passive dripping of blood from weapons. Dunedin, New Zealand: Forensic Biology Symposium, 22-22 Feb 2012.

• Kabaliuk N., Stotesbury T., Williams L., Taylor M., Jermy M. and Morison K. (2012) Blood droplet size in passive dripping. Hobart, Australia: 21st International Symposium on the Forensic Sciences (ANZFSS), 23-27 Sep 2012.

• Mohamad TI., Jermy M. and Harrison M. (2012) The effects of propane spray structures on Gasoline-to-LPG converted engine performance with respect to engine and cylinder pressures. Kuala Lumpur, Malaysia: International Conference on Manufacturing Engineering (ICME), 28-29 Aug 2012.

• Sinclair L., Kokhanenko P., Jermy M., Sellier M. and Brown K. (2012) Hydrodynamics of silica scaling. Rotorua, New Zealand: United States/New Zealand Joint Geothermal Workshop, 16-20 Apr 2012.

• Williams E., Taylor M., Morison K., Neumann E., Walt S. and Jermy M. (2012) Bloodstain pattern analysis and the surrogate pig, part 1: Close enough or just the next best thing? Hobart, Australia: 21st International Symposium on the Forensic Sciences (ANZFSS), 23-27 Sep 2012.

• Williams E., Taylor M., Morison K., Neumann E., Walt S. and Jermy M. (2012) Bloodstain pattern analysis and the surrogate pig, part 2: The ideal anticoagulant. Hobart, Australia: 21st International Symposium on the Forensic Sciences (ANZFSS), 23-27 Sep 2012.

• Jermy MC. and Taylor M. (2011) The application of fluid mechanics to blood spatter analysis. Dunedin, New Zealand: From Injury to Spatter - NZ Forensic Biomechanics Symposium, 15-15 Feb 2011.

• Lee D., Lim CW., Jermy M., Pons D., Bekcker S., Bruchewski M. and Krumdieck SP. (2011) PP-MOCVD reactor scale-up and system design for coating 3D objects. Kinsale, Ireland: EuroCVD18, 4-9 Sep 2011.

• Masuri S., Sinclair L., Brown K., Kokhanenko P., Sellier M. and Jermy M. (2011) Numerical modelling of silica scaling/Silica scaling test rig. Christchurch, New Zealand: New Zealand Geochemical and Mineralogical Society Meeting, 16-18 Nov 2011.

• Cave HM., Wu JS., Smith MR., Krumdieck SP. and Jermy MC. (2010) Implementation of Separate Fluxes of Multiple Species for a Quiet Direct Simulation (QDS) Method. Kaohsiung, Taiwan: 22nd Int. Conf. on Parallel CFD, 17-21 May 2010.

• Geoghegan PH., Jermy MC., Nobes D. and Buchmann N. (2010) Flow field and surface displacement in flexible silicone models of stenosed arteries. Auckland, New Zealand: 17th Australasian Fluid Mechanics Conference, 5-9 Dec 2010.

• Jermy MC., Caillaud G., Lenselink J. and Taylor MC. (2010) Digital image analysis of airborne blood droplets and spatter patterns. Auckland, New Zealand: 17th Australasian Fluid Mechanics Conference, 5-9 Dec 2010.

• Jermy MC., Lim CW., Kabaliuk N., Smith MR. and Wu JS. (2010) Viscosity and validity of a kinetic theory based flow modelling scheme. Auckland, New Zealand: 17th Australasian Fluid Mechanics Conference, 5-9 Dec 2010.

• Jermy MC., Spence CS., Collingwood R., Wenborn T., Green A., Lei MX., Al-Tiay Y. and Eaton-Evans J. (2010) Pressure losses in neonate breathing. Auckland, New Zealand: 17th Australasian Fluid Mechanics Conference, 5-9 Dec 2010.

• Krumdieck S., Siriwongrunson V., Lim CW., Jermy M., Cave H., Pons D. and Alkaisi M. (2010) Scale-up for industry application, and up-scale for three-dimensions: Process design study for Pulsed-Pressure MOCVD. San Diego, CA, USA: International Conference on Metallurgical Coatings and Thin Films, 26-30 Apr 2010.

• Lim CW., Cave HM., Jermy MC., Wu JS. and Krumdieck SP. (2010) Numerical simulation of low pressure flows in PP-CVD using QDS. Kaohsiung, Taiwan: 22nd Int. Conf. on Parallel CFD, 17-21 May 1994.

• Lim CW., Jermy MC., Wu JS. and Krumdieck SP. (2010) Simulation of Unsteady Low Pressure Flow in Pulsed Pressure Chemical Vapour Deposition Process using the Quiet Direct Simulation Method. Auckland, New Zealand: 17th Australasian Fluid Mechanics Conference, 5-9 Dec 2010.

• Spence CJT., Geoghegan PH., Lu XB., Jermy MC., Hunter PJ. and Cater JE. (2010) Stereoscopic Particle Image Velocimetry Measurement of Articulatory Airflow for Validation of a Computer Model. Auckland, New Zealand: 17th Australasian Fluid Mechanics Conference, 5-9 Dec 2010.

• Underwood L. and Jermy MC. (2010) Experimental measurements and a simple model of the boundary layer of a track cyclist. Auckland, New Zealand: 17th Australasian Fluid Mechanics Conference, 5-9 Dec 2010.

• Buchmann NA., Atkinson CH., Jermy MC. and Soria J. (2009) Three dimensional in-vitro measurements of carotid artery haemodynamics. Christchurch, New Zealand: 4th Asian Pacific Conference on Biomechanics, 14-17 Apr 2009.

• Spence CJT., Buchmann NA. and Jermy MC. (2009) Upper airway stereoscopic particle image velocimetry measurements with high-flow nasal cannula. Christchurch, New Zealand: 4th Asian Pacific Conference on Biomechanics, 14-17 Apr 2009.

• Buchmann NA. and Jermy MC. (2008) Blood Flow Measurements in idealised and patient specific models of the Human Carotid Artery. Lisbon, Portugal: 14th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 7-10 Jul 2008.

• Buchmann NA., Jermy MC. and Spence CJT. (2008) In-vitro imaging of blood flow in human carotid arteries. Nice, France: 13th International Symposium on Flow Visualization (ISFV-13), 1-4 Jul 2008.

• Buchmann NA., Nguyen CV., Wells JC. and Jermy M. (2008) In-Vitro Wall Shear Stress Measurements using Interfacial Particle Image Velocimetry (IPIV). Lisbon, Portugal: 14th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 10-14 Jul 2008.

• Buchmann NA., Spence CJT. and Jermy MC. (2008) Particle Image Velocimetry measurements of the flow field in a domestic kitchen oven as a function of temperature. Nice, France: 13th International Symposium on Flow Visualization (ISFV-13), 1-4 Jul 2008.

• Jermy MC., Buchmann N., Spence CJ., Nguyen CV. and David T. (2008) PIV of Human Blood and Upper Airway Flow in Scaled Models. University of Western Australia, Perth, Australia: Fifth Australian Conference on Laser Diagnostics in Fluid Mechanics and Combustion, 3-4 Dec 2008.

• Spence CJT., Buchmann NA. and Jermy MC. (2008) Particle Image Velocimetry measurements of nasal cavity flow with high flow humidified nasal interface. Nice, France: 13th International Symposium on Flow Visualization (ISFV-13), 1-4 Jul 2008.

• Tseng KC., Cave HM., Kuo TC., Jermy MC., Krumdieck SP. and Wu JS. (2008) Implementation of the Transient Adaptive Sub-Cell Module for the Parallel DSMC Code. Kyoto, Japan: 26th International Symposium on Rarefied Gas Dynamics, 21-26 Jul 2008.

• Buchmann NA., Jermy MC. and David T. (2007) Experimental Investigation of Blood Flow in the Brain by means of Particle Image Velocimetry - A preliminary Study. Shanghai, China: Fifth International Conference on Fluid Mechanics (ICFM-V), 15-19 Aug 2007.

• Cave HM., Tseng KC., Wu JS., Krumdieck S., Jermy MC., Chen YS. and Huang JC. (2007) Flow field modelling of pulsed pressure chemical vapour deposition. The Hague, Netherlands: 16th European Conference on Chemical Vapour Deposition (EUROCVD16), 16-21 Sep 2007.

• Cave HM., Krumdieck SP. and Jermy M. (2006) Simulations of Reactor Efficiency for Pulsed Pressure Chemical Vapor Deposition (PP-CVD). St Petersburg, Russia: 25th International Symposium on Rarefied Gas Dynamics (RGD25), 21-28 Jul 2006.

• Mohamad TI., Harrison M. and Jermy M. (2006) Performance of a Spark Plug Fuel Injector (SPFI) System for Direct Injection of Methane in Spark Ignition Engine for Low Cost Conversion from Port Injection Engine. Yokohama, Japan: 31st FISITA World Automotive Congress, 22-27 Oct 2006.

• Clark T., Wagner J., Mozumdar S., Flynn P., Nicholls K., Kennedy L., Jermy M., Harris G., Gilmore J. and Agmen K. (2005) Suppression of vortex ingestion in the Christchurch Engine Centre V2500 cell. Long Beach, CA, USA: Aerospace Testing Expo 2005, 8 Nov 2005.

• Jermy MC., Berrocal E. and Moukaideche F. (2004) Estimating the errors due to multiple scattering in spray imaging measurements: Experiments and simulation. Glasgow, UK: Optical Diagnostics in Engineering, Photon 04, 6 Sep 2004.

• Jermy MC., Noel T., Doherty WG. and Greenhalgh DA. (2004) Laser induced fluorescence measurements of the thickness of fuel films on the combustion chamber surface of a gasoline SI engine. Glasgow, UK: Optical Diagnostics in Engineering, Photon 04, 6 Sep 2004.

• Berrocal E., Jermy MC. and Allen A. (2003) Monte Carlo simulation of laser imaging diagnostics in polydisperse sprays. Saratov, Russia: Saratov Fall Meeting, 7 Oct 2003.

• Berrocal E., Jermy MC. and Allen A. (2003) Monte Carlo Simulation of Laser Imaging Diagnostics in Polydisperse Sprays. St. Petersburg, Russia: Laser Optics 2003, 30 Jun 2003.

• Greenhalgh DA., Jermy MC., Kelman J., Sherwood G., Doherty WG., Reveille T., Santos-Nunez C. and Hussain M. (2002) Optical diagnostics for the study of fuel injection, atomisation, sprays and fuel-air mixing. Cardiff International Arena, Cardiff, UK: Applied Optics and Optoelectronics Conference, 2 Sep 2002.

• Jermy M., Reveille T., Sherwood G., Kelman J. and Greenhalgh DA. (2002) Spectroscopic and computational studies of the suitability of fluorescent fuel tracers for Gasoline Direct Injection engine studies. Cardiff International Arena, Cardiff, UK: Applied Optics and Optoelectronics Conference, 2 Sep 2002.

• Jermy MC., Doherty WG. and Greenhalgh DA. (2002) The response of fuel injector sprays to acoustic perturbation and their role in combustion instability. Cardiff, UK: Photon02: Applied Optics and Optoelectronics Conference, 2 Sep 2002.

• Jermy MC., Hussain M. and Greenhalgh DA. (2002) Operating liquid-fuel airblast injectors in low pressure test rigs: strategies for scaling down the flow conditions. London, UK: Advanced Sensors & Instrumentation Systems for Combustion Processes, 9 Oct 2002.

• Wanten J. and Jermy MC. (2002) Guarded thermocouple measurements of inlet manifold air temperature to assess the extent of fuel vapourisation cooling in I.C. engine intakes. London, UK: Advanced Sensors and Instrumentation for Combustion Processes, 9 Oct 2002.

• Jermy M. and Allen A. (2001) Multiple scattering in dense scattering environments: Monte Carlo simulation. South Hadley, MA, USA: 2001 Gordon Research Conference on Laser Diagnostics in Combustion, 1 Jul 2001.

• Jermy MC. and Allen A. (2001) Multiple scattering in dense spray images: Monte Carlo simulation. Brighton, UK: 6th International Congress on Optical Particle Characterisation, 2 Apr 2001.

Intellectual Property

• Addis T., Jermy M., Schipper R., Weeber M. and Wright B. (2014) Emergency stabilising system for irrigators.Patent No. 700837.

Oral Presentations

• Jermy M., Chen S. and Freeman J. (2022) Airborne transmission of SARS-CoV-2: natural experiments in the MIQ system. Online: Bioengineering@Otago Showcase, 14 Feb 2022.

• Jermy M., Chen S. and Horner R. (2021) New aerodynamic design principles for improved brown marmorated stink bug traps. Napier, NZ: Brown Marmorated Stink Bug Symposium, 09 Aug 2021.

• Jermy M. (2011) Analysis of flow patterns and pressures in the neonatal upper airway using physical modelling. Auckland, New Zealand: Clinical Research and Development Forum, Fisher and Paykel Healthcare.

• Spence C., Jermy M. and White C. (2009) Fluid Dynamic Modelling of the Upper Airway. Auckland City Hospital, New Zealand: Nasal High Flow Research Forum.

Reports

• Ackley A., Chen J., Jermy M., Boulic M., Phipps R., MacKenzie S. and Gronert R. (2022) Evaluation of Ventilation in Early Childhood Education and Care (ECEs) Centres. In Evaluation of Ventilation in Early Childhood Education and Care (ECEs) Centres, NZ Ministry of Education. Commissioned by NZ Ministry of Education.

• Ackley A., Longley I., Chen S., MacKenzie S., Sutherland A., Jermy M., Phipps R., Gronert R. and Wilson J. (2022) The Effectiveness of Natural Ventilation: A case study of a typical New Zealand Classroom with simulated occupation.NZ Ministry of Education.

• Chen J., Ackley A., MacKenzie S., Jermy M., Longley I., Somervell E., Plagmann M., Gronert R. and Phipps R. (2022) Classroom Ventilation: The Effectiveness of Preheating and Refresh Breaks: An analysis of 169 spaces at 43 schools across New Zealand. In Classroom Ventilation: The Effectiveness of Preheating and Refresh Breaks: An analysis of 169 spaces at 43 schools across New Zealand, New Zealand Ministry of Education. Commissioned by New Zealand Ministry of Education.

• Sutherland A., Ackley A., Phipps R., Chen S. and Jermy M. (2022) The performance of portable HEPA air cleaners in naturally ventilated classrooms- A systematic literature review..

• Sutherland A., Ackley A., Phipps R., Longley I., MacKenzie S., Chen S., Jermy M. and Gronert R. (2022) The Impact of Natural Ventilation During Winter on Thermal Comfort: A systematic literature review.NZ Ministry of Education.

• Jermy M. (2004) Modelling a Fraunhöfer diffraction system to determine its feasibility for ejecta particle size measurements.AWE plc. Commissioned by AWE plc.

• Jermy M., Greenhalgh DA., Doherty WG. and Hussain M. (2004) The Interaction Between the Fuel Injector Spray and an Acoustic Field, Measured at 3 Bar.Competitive and Sustainable Growth Programme, European Community. 27pp.

• Jermy MC., Doherty WG. and Noël T. (2003) Development and Use of a Technique to Image and Measure the Depth of Fuel Films in Cylinders and Ports.Jaguar Cars Limited, Coventry, UK. 34pp.

• Jermy MC., Vuorenkoski A. and Harrison MF. (2003) Preliminary Assessment of LPG (Autogas) behaviour when injected into high-pressure nitrogen (air).Millbrook Proving Ground.

• Jermy M., Doherty WG. and Greenhalgh DA. (2002) The Interaction Between the Fuel Injector Spray and an Acoustic Field, Measured at Low Pressure.Competitive and Sustainable Growth Programme, European Community. 24pp.

Other

• Sellier M. and Jermy MC. (2011) Modelling fluid splashes. New Zealand Science Teacher(127): 12-24. [Magazine article].

• Jermy M. (2010) Track cycling aerodynamics. New Zealand Science Teacher(123): 2. [Magazine article].

Student Supervision

Displaying all items.

Current
• PhD - Coe M: Design and implementation of flexible fins on a robotic fish for stability during unstable swimming
• PhD - Manickavasagam A: Vibrational analysis of AFM
• PhD - Pishyar-Dekordi P: Multi-sensory speech perception and syllable structure (2024)
• PhD - Stephenson P: Design and analysis of an inhaler device
• Masters - Henderson M: Estimating the risk of transmission of airborne pathogens during respiratory therapy (2022)
• Masters - Impey T: Sit-ski aerodynamics (2022)
• Masters - Stephenson P: Design and analysis of an inhaler deivce
• Masters - Williams R: Modelling efficiency of spray collector instruments (2022)
Completed
• PhD - Adams C: Breathing therapies for COPD and asthma patients (2017)
• PhD - Ahmed G: 2011-PhD/DMA/EdD-Ahmed, Gulraiz (2014)
• PhD - Brooks T: Modelling head injury in infants
• PhD - Buchmann N: 2006-PhD/DMA/EdD-Buchmann, Nicholas (2010)
• PhD - Cave H: 2005-PhD/DMA/EdD-Cave, Hadley (2008)
• PhD - Chen S: Silica scaling in geothermal plant
• PhD - Chyrva I: UAV flow fields and impact on onboard spraying and sensing devices for aerial spray applications (2022)
• PhD - Clemens K: Aerodynamics of land speed record electric sidecar (2017)
• PhD - Fernandez R: 2009-PhD/DMA/EdD-Fernandez, Rajan (2013)
• PhD - Geoghegan P: 2008-PhD/DMA/EdD-Geoghegan, Patrick (2013)
• PhD - Gessesse A: 2010-PhD/DMA/EdD-Gessesse, Alelign (2013)
• PhD - Gilmore J: 2005-PhD/DMA/EdD-Gilmore, Jordan (2012)
• PhD - Hamm A: 2005-PhD/DMA/EdD-Hamm, Andreas (2008)
• PhD - Hewett J: Silica scaling in geothermal power plant (2018)
• PhD - Ho W: 2006-PhD/DMA/EdD-Ho, Wei Hua (2009)
• PhD - Kabaliuk N: 2010-PhD/DMA/EdD-Kabaliuk, Natalia (2014)
• PhD - Kokhanenko P: Silica scaling in geothermal power plant (2015)
• PhD - Lee D: 2009-PhD/DMA/EdD-Lee, Darryl (2013)
• PhD - Lim C: 2008-PhD/DMA/EdD-Lim, Chin Wai (2012)
• PhD - Manickasvagam A: Vibrational analysis of AFM (2020)
• PhD - McGregor A: Design of a kinematic sculpture (2022)
• PhD - Pancholy P: Flow in street canyons (2018)
• PhD - Pancholy PP: Numerical study of the flow structure and pedestrian comfort in urban street canyons (2017)
• PhD - Siwach S: Vapourisers for geothermal power plant (2016)
• PhD - Soltanipour Lazarjan M: Tissue simulants for experiments in gunshot wounding (2015)
• PhD - Spence C: 2007-PhD/DMA/EdD-Spence, Callum (2011)
• PhD - Underwood L: 2008-PhD/DMA/EdD-Underwood, Lindsey (2013)
• PhD - Williamson P: Compliance effects in arterial stents (2022)
• PhD - Yazdi SG: In-vitro modelling of aortic arch hemodynamic for surgical implant testing (2016)
• Masters - Barfucci S: Novel fish sorter to reduce bycatch (2021)
• Masters - Buchajczyk M: Compliant elements in models of the human airway (2017)
• Masters - Dawson R: 2006-Masters Thesis-Dawson, Ross (2012)
• Masters - Dey K: 2012-Masters Thesis-Dey, Karla (2014)
• Masters - Dhandu S: 3D printed model of a dragonfly wing (2016)
• Masters - Frye J: 2004-Masters Thesis-Frye, Jake (2006)
• Masters - Harper J: 2004-Masters Thesis-Harper, John (2006)
• Masters - Longworth L: Effects of electrostatically enhanced spraying on the deposition distribution of pesticide on grapevine bunches, leaves and trunks. (2020)
• Masters - MacPhee J: 2008-Masters Thesis-MacPhee, James (2010)
• Masters - McNearney E: Electrostatic spraying for horticulture (2020)
• Masters - Moore J: 2006-Masters Thesis-Moore, Jaclyn (2008)
• Masters - Pons A: Analysis of aeroelastic response (2015)
• Masters - Shand D: Modelling Jetpack Impact Following Emergency Descent (2017)
• Masters - Sinclair L: 2010-Masters Thesis-Sinclair, Luke (2012)
• Masters - Southon M: Development of standards for ORC systems for waste heat (2015)
• Masters - Baines J: Multicopter flow modelling (2019)
• Honours - Abernethy M: Infant resuscitation test bench (2017)
• Honours - Addis T: Stability of irrigators (2014)
• Honours - Agmen K: 2005-Honours-Agmen, Keith (2005)
• Honours - Anderson J: 2006-Honours-Anderson, John (2006)
• Honours - Aplin G: 2006-Honours-Aplin, Gareth (2006)
• Honours - Azman N: Infant resuscitation test bench (2016)
• Honours - Barker L: DishDrawer Wash Pump Evolution (2017)
• Honours - Barnett E: 2007-Honours-Barnett, Estelle (2007)
• Honours - Bedford E: 2011-Honours-Bedford, Elyse (2011)
• Honours - Bennetts A: 2005-Honours-Bennetts, Andrew (2005)
• Honours - Bosworth S: 2005-Honours-Bosworth, Scott (2005)
• Honours - Boyce T: 2006-Honours-Boyce, Tim (2006)
• Honours - Bradley A: 2007-Honours-Bradley, Antonio (2007)
• Honours - Brockerhoff V: Propeller design for sUAS (2016)
• Honours - Burden J: 2009-Honours-Burden, Jun (2009)
• Honours - Burgess A: 2012-Honours-Burgess, Aidan (2012)
• Honours - Burt A: Eliminating Wilding Pines by Semi-Automated Spraying from Helicopters (2021)
• Honours - Campbell L: 2011-Honours-Campbell, Logan (2011)
• Honours - Campbell R: Infant resuscitation test bench (2016)
• Honours - Cannon E: Electrostatic Spraying (2019)
• Honours - Childs R: Eliminating Wilding Pines by Semi-Automated Spraying from Helicopters (2021)
• Honours - Christensen N: 2009-Honours-Christensen, Nick (2009)
• Honours - Chuah J: 2005-Honours-Chuah, Jeremy (2005)
• Honours - Cleland M: 2009-Honours-Cleland, Malcolm (2009)
• Honours - Collingwood R: 2010-Honours-Collingwood, Ryan (2010)
• Honours - Conway M: 2009-Honours-Conway, Martin (2009)
• Honours - Couper R: Variable Geometry Winglet (2020)
• Honours - Cressy O: 2011-Honours-Cressy, Othniel (2011)
• Honours - Crum E: 2013-Honours-Crum, Elizabeth (2013)
• Honours - de Tracey Gould J: 2007-Honours-de Tracey Gould, Joseph (2007)
• Honours - Dennison F: 2008-Honours-Dennison, Fraser (2008)
• Honours - Dey K: 2011-Honours-Dey, Karla (2011)
• Honours - Dobbie H: 2005-Honours-Dobbie, Hamish (2005)
• Honours - Double T: Ducted propeller efficiency (2015)
• Honours - du Toit C: Cranial bone biomechanics (2021)
• Honours - Dumbleton H: 2006-Honours-Dumbleton, Henry (2006)
• Honours - Durning J: 2007-Honours-Durning, Joseph (2007)
• Honours - Ellis T: Spray deposition sensor (2019)
• Honours - Ellison B: 2007-Honours-Ellison, Ben (2007)
• Honours - Emmanuel R: Eliminating Wilding Pines by Semi-Automated Spraying from Helicopters (2020)
• Honours - Evans L: 2007-Honours-Evans, Leon (2007)
• Honours - Falconer M: 2009-Honours-Falconer, Malcolm (2009)
• Honours - Feasey C: 2012-Honours-Feasey, Caitlin (2012)
• Honours - Feldtmann E: Pressure sensing and mapping (2019)
• Honours - Fitzgerald R: Electrostatic spray nozzle optimization (2019)
• Honours - Flusk V: Pressure sensing and mapping (2019)
• Honours - Gavin R: Mineral scaling in geothermal power plant (2014)
• Honours - Gibb B: Ducted propeller efficiency (2015)
• Honours - Gilmore J: 2005-Honours-Gilmore, Jordan (2005)
• Honours - Gleadow J: Electrostatic Spraying (2019)
• Honours - Goodman T: 2008-Honours-Goodman, Tegan (2008)
• Honours - Graham M: Eliminating Wilding Pines by Semi-Automated Spraying from Helicopters (2021)
• Honours - Green A: 2010-Honours-Green, Andrew (2010)
• Honours - Hager F: 2005-Honours-Hager, Ferdinand (2005)
• Honours - Hamilton Z: Babies Breathe Easier (2015)
• Honours - Handey S: 2005-Honours-Handey, Sarah (2005)
• Honours - Hedley D: 2009-Honours-Hedley, Dave (2009)
• Honours - Henderson M: Variable Geometry Winglet (2020)
• Honours - Hendricksen T: CO2 regulation for simulation of infant care respiratory support (2017)
• Honours - Hendrickson H: Electrostatic Spraying (2018)
• Honours - Hight D: 2006-Honours-Hight, Daniel (2006)
• Honours - Hine A: 2013-Honours-Hine, Andrew (2013)
• Honours - Holmes C: Eliminating Wilding Pines by Semi-Automated Spraying from Helicopters (2021)
• Honours - Hu T: CO2 regulation for simulation of infant care respiratory support (2017)
• Honours - Hudson J: Eliminating Wilding Pines by Semi-Automated Spraying from Helicopters (2020)
• Honours - Hunn L: Eliminating Wilding Pines by Semi-Automated Spraying from Helicopters (2020)
• Honours - Isaacs S: 2008-Honours-Isaacs, Sam (2008)
• Honours - Jackson M: Mineral scaling in geothermal power plant (2014)
• Honours - Jans G: Ducted propeller efficiency (2015)
• Honours - Janssen S: Electrostatic spray nozzle optimization (2019)
• Honours - Janssen S: Electrostatic spraying (2020)
• Honours - Jayathissa P: 2010-Honours-Jayathissa, Prageeth (2010)
• Honours - Johns D: 2007-Honours-Johns, David (2007)
• Honours - Kamoi S: 2007-Honours-Kamoi, Shun (2007)
• Honours - Kang Y: Spray deposition sensor (2019)
• Honours - Kelly J: Propeller design for sUAS (2016)
• Honours - Kennedy C: DishDrawer Wash Pump Evolution (2017)
• Honours - Kerr J: Electrostatic spray nozzle optimization (2019)
• Honours - Kirkman D: 2009-Honours-Kirkman, Daniel (2009)
• Honours - Kirtikar A: Ducted propeller efficiency (2015)
• Honours - Krause N: Spray deposition sensor (2019)
• Honours - Kulvis S: DishDrawer Wash Pump Evolution (2017)
• Honours - Kumar M: 2011-Honours-Kumar, Madhava (2011)
• Honours - Laird M: 2008-Honours-Laird, Mark (2008)
• Honours - Lee D: 2008-Honours-Lee, Darryl (2008)
• Honours - Lei N: 2010-Honours-Lei, Nick (2010)
• Honours - Lensen M: 2012-Honours-Lensen, Mathew (2012)
• Honours - Longworth L: Electrostatic Spraying (2018)
• Honours - Loo S: Infant resuscitation test bench (2016)
• Honours - Luscombe J: CO2 regulation for simulation of infant care respiratory support (2017)
• Honours - Macdonald S: 2011-Honours-Macdonald, Sarah (2011)
• Honours - Macphee J: 2007-Honours-Macphee, James (2007)
• Honours - Martin M: 2008-Honours-Martin, Madeleine (2008)
• Honours - Martin S: 2007-Honours-Martin, Scott (2007)
• Honours - Matthews A: 2010-Honours-Matthews, Andrew (2010)
• Honours - Matthews H: Infant Respiratory Therapy Demonstrator (2018)
• Honours - McGill A: 2005-Honours-McGill, Andrew (2005)
• Honours - Mcintosh G: Cranial bone biomechanics (2021)
• Honours - Neale Z: Babies Breathe Easier (2015)
• Honours - Nicoll G: 2005-Honours-Nicoll, Grant (2005)
• Honours - Nyce A: 2010-Honours-Nyce, Andy (2010)
• Honours - O'Brien J: Spray deposition sensor (2019)
• Honours - O'Connor D: Babies Breathe Easier (2015)
• Honours - Owles J: Cranial bone biomechanics (2021)
• Honours - Pacey N: Mineral scaling in geothermal power plant (2014)
• Honours - Pascoe N: Propeller design for sUAS (2016)
• Honours - Phiansamoe B: Variable Geometry Winglet (2020)
• Honours - Quirk C: 2008-Honours-Quirk, Chris (2008)
• Honours - Raju A: Electrostatic spray nozzle optimization (2019)
• Honours - Rathbun W: 2005-Honours-Rathbun, William (2005)
• Honours - Reeves S: Infant Respiratory Therapy Demonstrator (2018)
• Honours - Richards T: Propeller design for sUAS (2016)
• Honours - Robb N: 2006-Honours-Robb, Nick (2006)
• Honours - Roberts D: 2005-Honours-Roberts, Dannielle (2005)
• Honours - Sander X: DishDrawer Wash Pump Evolution (2017)
• Honours - Schaffler S: 2013-Honours-Schaffler, Sebastian (2013)
• Honours - Schipper R: Stability of irrigators (2014)
• Honours - Schultz R: Electrostatic spray nozzle optimization (2019)
• Honours - Searle H: 2011-Honours-Searle, Helen (2011)
• Honours - Spence C: 2006-Honours-Spence, Callum (2006)
• Honours - Steel J: Electrostatic Spraying (2018)
• Honours - Steel J: Modelling charging in electrostatic spraying (2021)
• Honours - Stevens B: Cranial bone biomechanics (2021)
• Honours - Storey J: 2013-Honours-Storey, John (2013)
• Honours - Sussman A: Infant Respiratory Therapy Demonstrator (2018)
• Honours - Tan G: 2013-Honours-Tan, Gabrielle (2013)
• Honours - Taylor J: Eliminating Wilding Pines by Semi-Automated Spraying from Helicopters (2020)
• Honours - Thornton N: Infant Respiratory Therapy Demonstrator (2018)
• Honours - Toovey L: Pressure sensing and mapping (2019)
• Honours - Ulusele I: Variable Geometry Winglet (2020)
• Honours - van der Gouw J: 2009-Honours-van der Gouw, Joe (2009)
• Honours - van Irsel N: Propeller design for sUAS (2016)
• Honours - Van't Sant J: CO2 regulation for simulation of infant care respiratory support (2017)
• Honours - Vasta C: Pressure sensing and mapping (2019)
• Honours - Waddingham A: 2007-Honours-Waddingham, Alice (2007)
• Honours - Ward L: Babies Breathe Easier (2015)
• Honours - Wasley M: 2013-Honours-Wasley, Matthew (2013)
• Honours - Weeber M: Stability of irrigators (2014)
• Honours - Wenborn T: 2010-Honours-Wenborn, Timothy (2010)
• Honours - Whimster E: 2008-Honours-Whimster, Emily (2008)
• Honours - Wilson C: 2012-Honours-Wilson, Cameron (2012)
• Honours - Winn O: 2011-Honours-Winn, Olivia (2011)
• Honours - Wiseman S: 2010-Honours-Wiseman, Samuel (2010)
• Honours - Wooley A: 2006-Honours-Wooley, Andrew (2006)
• Honours - Wright B: Stability of irrigators (2014)
• Honours - Wright M: 2007-Honours-Wright, Michael (2007)
• Honours - Yiu C: 2006-Honours-Yiu, Chun Man (2006)
• Summer Student - Green J: Lean principles applied to a medium size agricultural engineering firm (2019)
• Summer Student - Lee D: Gas Dynamic Virtual Nozzles (2019)
• Summer Student - Longworth L: Electrostatic spraying field test equipment (2019)
• Summer Student - Stephenson P: Multi-component droplet growth modelling (2019)

Review and Refereeing

Displaying all items.

• ASME Journal of Biomechanical Engineering ( 2006 - 2023)
• Computer Physics Communications ( 2006 - 2023)
• Experiments in Fluids ( 2006 - 2023)
• Journal of Heat Transfer ( 2006 - 2023)
• Journal of Sports Engineering and Technology ( 2006 - 2023)
• Journal of Visualization ( 2006 - 2023)
• Measurement Science and Technology ( 2006 - 2023)
• Optics and Lasers in Engineering ( 2000 - 2005)
• Optics Express ( 2000 - 2005)

Research Groups