UC Research Profile - University of Canterbury

Associate Professor Gregory MacRae

Contact

Department: Civil and Natural Resources Engineering ; QuakeCore

Email: gregory.macrae@canterbury.ac.nz

Direct Dial: +64 3 3692068

Office: Civil & Natural Resources Engineering E408

Language: English

About

Research / Creative works

Networks

Projects

Fields of Research

Low Damage Construction
Steel/Composite Structures
Earthquake Engineering
Structural Dynamics
Loss Estimation
Communicating Risk

Researcher Summary

Research interests include steel structures, reinforced concrete structures, composite structures, earthquake engineering, regularity, probabilistic evaluation of structures, effect of ground motion type on behaviour, and communicating risk.

Subject Area: Disciplines

Engineering and Technology: Aerodynamics & Wind ; Civil ; Concrete ; Design ; Earthquake Engineering ; Fire Engineering ; Fluids Engineering ; Geotechnical Engineering ; Materials ; Resource/Environment Engineering ; Structural ; Timber ; Transportation

Resources

Staff webpage

Research/Scholarly/Creative Works

Authored Books

Ballantyne D., Bartoletti S., Chang S., Graff B., MacRae G., Meszaros J., Pearce I., Pierepiekarz M., Preuss J. and Stewart M. (2005) Scenario for a Magnitude 6.7 Earthquake on the Seattle Fault [EF-2005-01]. Oakland: Earthquake Engineering Research Institute. 170-170.

Chapters

MacRae GA. and Lehman D. (2001) Chapter 4, 'Buildings'. In Group NEC; Washington UO (Ed.), The Nisqually, Washington, Earthquake, February 28, 2001 Preliminary Reconnaissance Report: 5. Seattle: Earthquake Engineering Research Institute.

Roeder CW. and MacRae GA. (1997) Chapter 10: Steel Structures. In Beskos DE; Anagnostopoulos SA (Ed.), Computer Analysis and Design of Earthquake-Resistant Structures: 533-561. Southampton: Computational Mechanics Publications.

Kawashima K., MacRae GA., Hasegawa K., Ikeuchi T. and Oshima K. (1992) Ductility of Steel Bridge Piers from Dynamic Loading Tests. In Fukumoto Y; Lee G (Ed.), Stability and Ductility of Steel Structures under Cyclic Loading: 149-162. Boca Raton: CRC Press Inc..

MacRae GA. and Kawashima K. (1992) Estimation of the Deformation Capacity of Steel Bridge Piers. In Fukumoto Y; Lee G (Ed.), Stability and Ductility of Steel Structures under Cyclic Loading: 335-349. Boca Raton: CRC Press Inc..

Journal Articles

Chanchi Golondrino JC., MacRae GA., Chase JG., Rodgers GW. and Clifton GC. (2020) Asymmetric Friction Connection Bolt Lever Arm Effects on Hysteretic Behaviour. Journal of Earthquake Engineering http://dx.doi.org/10.1080/13632469.2020.1733136.

Cook J., Rodgers GW. and MacRae GA. (2020) Design and Testing of Ratcheting, Tension-Only Devices for Seismic Energy Dissipation Systems. Journal of Earthquake Engineering 24(2): 328-349. http://dx.doi.org/10.1080/13632469.2018.1441765.

Zhang P., Zhu H., Lu W., Lu X. and MacRae GA. (2020) Vibration analysis of shallow cable with horizontal spring and dashpot at one end. Engineering Structures 211 http://dx.doi.org/10.1016/j.engstruct.2020.110452.

Au EV., MacRae G., Pettinga D., Deam B., Sadashiva V. and Soleimankhani H. (2019) Seismic response of torsionally irregular single story structures. Bulletin of the New Zealand Society for Earthquake Engineering 52(1): 44-53. http://dx.doi.org/10.5459/bnzsee.52.1.44-53.

Bruneau M. and MacRae G. (2019) Building structural systems in Christchurch’s post-earthquake reconstruction. Earthquake Spectra 35(4): 1953-1978. http://dx.doi.org/10.1193/052818EQS126O.

Chanchi Golondrino JC., MacRae GA., Chase JG., Rodgers GW. and Clifton GC. (2019) Asymmetric Friction Connection (AFC) design for seismic energy dissipation. Journal of Constructional Steel Research 157: 70-81. http://dx.doi.org/10.1016/j.jcsr.2019.02.027.

Chanchi Golondrino JC., MacRae GA., Chase JG., Rodgers GW., Scott ACN. and Clifton GC. (2019) Steel Building Friction Connection Seismic Performance – Corrosion Effects. Structures 19: 96-109. http://dx.doi.org/10.1016/j.istruc.2018.11.008.

Chaudhari T., MacRae G., Bull D., Clifton C. and Hicks S. (2019) Experimental behaviour of steel beam-column subassemblies with different slab configurations. Journal of Constructional Steel Research 162 http://dx.doi.org/10.1016/j.jcsr.2019.105699.

Rad AA. and MacRae GA. (2019) Displacement Estimation of Elastic Structures with Unbalanced Stiffness Using Energy Approach. Journal of Earthquake Engineering http://dx.doi.org/10.1080/13632469.2019.1572038.

Rad AA., Hazaveh NK., MacRae GA., Rodgers GW. and Ma Q. (2019) Structural straightening with tension braces using aftershocks – Shaking table study. Soil Dynamics and Earthquake Engineering 123: 399-412. http://dx.doi.org/10.1016/j.soildyn.2019.05.005.

Ramhormozian S., Clifton GC., Latour M. and MacRae GA. (2019) Proposed simplified approach for the seismic analysis of multi-storey moment resisting framed buildings incorporating friction sliders. Buildings 9(5) http://dx.doi.org/10.3390/buildings9050130.

Ramhormozian S., Clifton GC., MacRae GA., Davet GP. and Khoo HH. (2019) Experimental studies on Belleville springs use in the sliding hinge joint connection. Journal of Constructional Steel Research 159: 81-94. http://dx.doi.org/10.1016/j.jcsr.2019.03.031.

Rezaeian H., Clifton GC., MacRae GA. and Lim JBP. (2019) In-plane cyclic behaviour of composite floor slab diaphragm interfaces under high-shear demand. Journal of Constructional Steel Research http://dx.doi.org/10.1016/j.jcsr.2019.105838.

Rezaeian H., Clifton GC., MacRae GA., Hogan L. and Lim JBP. (2019) In-plane behaviour of composite floor slab diaphragm interfaces under high shear demand. Journal of Constructional Steel Research 162 http://dx.doi.org/10.1016/j.jcsr.2019.105715.

Tjahjanto H., MacRae G., Abu A., Clifton C., Beetham T. and Mago N. (2019) Diaphragm axial capacity for external diaphragm connections (EDCs) in square CFST column structures. Bulletin of the New Zealand Society for Earthquake Engineering 52(3): 134-140. http://dx.doi.org/10.5459/BNZSEE.52.3.134-140.

Chanchi Golondrino JC., MacRae GA., Chase JG., Rodgers GW. and Clifton GC. (2018) Hysteretic Behaviour of Asymmetrical Friction Connections Using Brake Pads of D3923. Structures 16: 164-175. http://dx.doi.org/10.1016/j.istruc.2018.09.012.

Chanchi Golondrino JC., MacRae GA., Chase JG., Rodgers GW., Abu AKG. and Clifton GC. (2018) Asymmetrical friction connections post-heating behaviour. Journal of Constructional Steel Research 149: 119-129. http://dx.doi.org/10.1016/j.jcsr.2018.07.018.

Gholamhoseini A., Khanlou A., MacRae G., Hicks S., Scott A. and Clifton C. (2018) Short-term behaviour of reinforced and steel fibre–reinforced concrete composite slabs with steel decking under negative bending moment. Advances in Structural Engineering 21(9): 1288-1301. http://dx.doi.org/10.1177/1369433217739710.

Malek A., Andisheh K., Scott A., Pampanin S., MacRae G. and Palermo AG. (2018) Residual capacity and permeability-based damage assessment of concrete in damaged RC columns. Journal of Materials in Civil Engineering 30(6) http://dx.doi.org/10.1061/(ASCE)MT.1943-5533.0002312.

Malek A., Scott A., Pampanin S., MacRae G. and Marx S. (2018) Residual capacity and permeability-based damage assessment of concrete under low-cycle fatigue. Journal of Materials in Civil Engineering 30(6) http://dx.doi.org/10.1061/(ASCE)MT.1943-5533.0002248.

Rodgers GW., Herve R., MacRae GA., Chanchi Golondrino J. and Chase JG. (2018) Dynamic Friction Coefficient and Performance of Asymmetric Friction Connections. Structures 14: 416-423. http://dx.doi.org/10.1016/j.istruc.2017.09.003.

Yeow T., MacRae GA., Dhakal R. and Bradley BA. (2018) Validating the sliding mechanics of office-type furniture using shake-table experiments. Bulletin of the New Zealand Society for Earthquake Engineering 51(1): 1-11.

Yeow TZ., Orumiyehei A., Sullivan TJ., MacRae GA., Clifton GC. and Elwood KJ. (2018) Seismic performance of steel friction connections considering direct-repair costs. Bulletin of Earthquake Engineering 16(12): 5963-5993. http://dx.doi.org/10.1007/s10518-018-0421-x.

Koopaee ME., Dhakal RP. and MacRae G. (2017) Effect of ground motion selection methods on seismic collapse fragility of RC frame buildings. Earthquake Engineering and Structural Dynamics 46(11): 1875-1892. http://dx.doi.org/10.1002/eqe.2891.

Malek A., Scott A., Pampanin S. and MacRae G. (2017) Post-event damage assessment of concrete using the fluorescent microscopy technique. Cement and Concrete Research 102: 203-211. http://dx.doi.org/10.1016/j.cemconres.2017.09.015.

Pourali A., Dhakal R., MacRae G. and Tasligedik S. (2017) Fully-Floating Suspended Ceiling System: Experimental Evaluation of Structural Feasibility and Challenges. Earthquake Spectra 33(4): 1627-1654. http://dx.doi.org/10.1193/092916EQS163M.

Ramhormozian S., Clifton GC., MacRae GA. and Davet GP. (2017) Stiffness-based approach for Belleville springs use in friction sliding structural connections. Journal of Constructional Steel Research 138: 340-356. http://dx.doi.org/10.1016/j.jcsr.2017.07.009.

Rodgers GW., Chase JG., Causse R., Chanchi J. and MacRae GA. (2017) Performance and degradation of sliding steel friction connections: Impact of velocity, corrosion coating and shim material. Engineering Structures 141: 292-302. http://dx.doi.org/10.1016/j.engstruct.2017.02.070.

Yeow TZ., MacRae GA. and Dhakal RP. (2017) Wall building stiffness and strength effect on content sliding in Wellington seismic conditions. Earthquake Engineering and Structural Dynamics 46(6): 1023-1042. http://dx.doi.org/10.1002/eqe.2843.

Borzouie J., Chase JG., MacRae GA., Rodgers GW. and Clifton GC. (2016) Spectral Assessment of the Effects of Base Flexibility on Seismic Demands of a Structure. Advances in Civil Engineering 2016 3984149 http://dx.doi.org/10.1155/2016/3984149.

Borzouie J., MacRae G., Chase J., Rodgers G. and Clifton G. (2016) Experimental Studies on Cyclic Performance of Column Base Strong Axis-Aligned Asymmetric Friction Connections. Journal of Structural Engineering 142(1) http://dx.doi.org/10.1061/(ASCE)ST.1943-541X.0001327.

Chaudhari T. and MacRae GA. (2016) Gap Infill material for Structural Seismic Application. SESOC Journal 29(1): 94-102.

Dhakal RP., MacRae GA., Pourali A. and Paganotti G. (2016) Seismic Fragility of Suspended Ceiling Systems Used in NZ Based on Component Tests. Bulletin of the NZ Society for Earthquake Engineering 49(1): 45-63.

Dhakal RP., Pourali A., Tasligedik S., Yeow T., Baird A., MacRae GA., Pampanin S. and Palermo A. (2016) Seismic performance of non-structural components and contents in buildings: an overview of NZ research. Earthquake Engineering and Engineering Vibration 15(1): 1-17.

Gholamhoseini A., Khanlou A., MacRae G., Scott A., Hicks S. and Leon R. (2016) An experimental study on strength and serviceability of reinforced and steel fibre reinforced concrete (SFRC) continuous composite slabs. Engineering Structures 114: 171-180. http://dx.doi.org/10.1016/j.engstruct.2016.02.010.

Kuang A., Sridhar A., Garven J., Gutschmidt S., Rodgers GW., Chase JG., Gavin HP., Nigbor RL. and Macrae GA. (2016) Christchurch Women's Hospital: Performance Analysis of the Base-Isolation System during the Series of Canterbury Earthquakes 2011-2012. Journal of Performance of Constructed Facilities 30(4) http://dx.doi.org/10.1061/(ASCE)CF.1943-5509.0000846.

Tjahjanto HH., MacRae GA., Abu AK., Clifton GC., Beetham T. and Mago N. (2016) Design capacity of external diaphragm connections for square CFST columns. Journal of Steel and Composite Structures (in press).

Yeow TZ., MacRae GA., Dhakal RP. and Lin SL. (2016) Predicting the maximum total sliding displacement of contents in earthquakes. Journal of Architectural Engineering 22(1) 4015013 http://dx.doi.org/10.1061/(ASCE)AE.1943-5568.0000193.

Ahmed SM., Gunasekaran U. and MacRae GA. (2015) Analytical Investigation on the Seismic Performance of Slabs in RC Frame Joints. Magazine of Concrete Research 67(22): 1179-1189. http://dx.doi.org/10.1680/jmacr.14.00132.

Borzouie J., MacRae GA., Chase JG., Rodgers GW. and Clifton GC. (2015) Experimental studies on cyclic performance of column base weak axis aligned asymmetric friction connection. Journal of Constructional Steel Research 112: 252-262. http://dx.doi.org/10.1016/j.jcsr.2015.05.007.

Borzouie J., MacRae GA., Chase JG., Rodgers GW., Xie R., Golondrino JC. and Clifton GC. (2015) Cyclic Performance of Asymmetric Friction Connections with Grade 10.9 Bolts. The Bridge and Structural Engineer 45(1): 53-62.

Chase JG., Boyer F., Rodgers GW., Labrosse G. and MacRae GA. (2015) Author's reply to discussion on: probabilistic risk analysis of structural impact in seismic events for linear and nonlinear systems. Earthquake Engineering & Structural Dynamics 44(3): 495-498. http://dx.doi.org/10.1002/eqe.2531.

Chase JG., Boyer F., Rodgers GW., Labrosse G. and MacRae GA. (2015) Linear and Nonlinear Seismic Structural Impact Response Spectral Analyses. Advances in Structural Engineering 18(4): 555-570. http://dx.doi.org/10.1260/1369-4332.18.4.555.

Chunhaviriyakul P., MacRae GA., Anderson D., Clifton GC. and Leon RT. (2015) Suitability of CFT columns for New Zealand moment frames. Bulletin of the New Zealand Society for Earthquake Engineering 48(1): 63-75.

Khoo HH., Clifton C., MacRae G., Zhou H. and Ramhormozian S. (2015) Proposed design models for the asymmetric friction connection. Earthquake Engineering & Structural Dynamics 44(8): 1309-1324. http://dx.doi.org/10.1002/eqe.2520.

Koopaee ME., Dhakal RP. and MacRae GA. (2015) Analytical Simulation of Seismic Collapse of RC Frame Buildings. Bulletin of the New Zealand Society for Earthquake Engineering 48(3): 158-170.

Lin SL., MacRae GA., English R., Yeow TZ. and Dhakal RP. (2015) Building Contents Sliding demands in Elastically Responding Structures. Engineering Structures 86: 182-191. http://dx.doi.org/10.1016/j.engstruct.2015.01.004.

Moghaddasi M., MacRae GA., Chase JG., Cubrinovski M. and Pampanin S. (2015) Seismic Design of Yielding Structures on Flexible Foundations. Earthquake Engineering and Structural Dynamics 44(11): 1805-1821. http://dx.doi.org/10.1002/eqe.2556.

Rad AA., MacRae GA., Yeow TZ. and Bull D. (2015) Seismic behavior of steel buildings with out-of-plumb. Earthquake Engineering & Structural Dynamics 44(14): 2575-2588. http://dx.doi.org/10.1002/eqe.2598.

Chase JG., Boyer F., Rodgers GW., Labrosse G. and MacRae GA. (2014) Probabilistic risk analysis of structural impact in seismic events for linear and nonlinear systems. Earthquake Engineering and Structural Dynamics 43(10): 1565-1580. http://dx.doi.org/10.1002/eqe.2414.

Iihoshi C., MacRae GA., Rodgers GW. and Chase JG. (2014) Viability of Slab Sliding System for Single Story Structure. International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering 8(2): 356-360.

Rodgers GW., Mesnil O., Chanchi J., MacRae GA., Clifton C. and Chase JG. (2014) Generalised Nonlinear Modeling of Unstable Stick-Slip Force Reduction Effects in Friction Energy Dissipation Devices. Bulletin of the New Zealand Society for Earthquake Engineering 47(3): 217-223.

Sridhar A., Kuang A., Garven J., Gutschmidt S., Chase JG., Gavin HP., Nigbor R., Rodgers G. and MacRae G. (2014) Christchurch Women's Hospital: Analysis of Measured Earthquake Data During the 2011-2012 Christchurch Earthquakes. Earthquake Spectra 30(1): 383-400. http://dx.doi.org/10.1193/021513EQS027M.

Ahmed SM., Gunasekaran U. and Macrae GA. (2013) Slab effects on building seismic performance: State of the art. Journal of Structural Engineering (India) 40(2): 136-141.

Ahmed SM., Umarani C. and MacRae GA. (2013) Slab Effects on Building Seismic Performance: State of The Art. Journal of Structural Engineering, JoSE 40(3): 254-261.

Khoo HH., Clifton C., Butterworth J. and MacRae G. (2013) Experimental study of full-scale self-centering Sliding Hinge Joint connections with friction ring springs. Journal of Earthquake Engineering 17(7): 972-997. http://dx.doi.org/10.1080/13632469.2013.787378.

Khoo HH., Seal C., Clifton GC., Butterworth J. and MacRae GA. (2013) Behaviour of the Bottom and Top Flange Plates in the Sliding Hinge Joint. Bulletin of the NZ Society for Earthquake Engineering 46(1): 1-10.

Sheet IS., Gunasekaran U. and MacRae GA. (2013) Experimental Investigation of CFT Column to Steel Beam Connections Under Cyclic Loading. Journal of Constructional Steel Research 86: 167-182. http://dx.doi.org/10.1016/j.jcsr.2013.03.021.

Sheet IS., Umarani C. and MacRae GA. (2013) Modelling of Steel Beam-Column Connections under Dynamic Excitation. Journal of Structural Engineering, JoSE 40(3): 254-261.

Yeow T., MacRae GA., Kawashima K. and Sadashiva VK. (2013) Dynamic Stability and Design of C-Bent Columns. Journal of Earthquake Engineering 17(5): 750-768. http://dx.doi.org/10.1080/13632469.2013.771591.

Ahmed Saddam M., Gunasekaran U. and MacRae GA. (2012) A Parametric Study of the Reinforced Concrete Slab Subjected to Dynamic Excitation. Applied Mechanics and Materials 147: 270-277. http://dx.doi.org/10.4028/www.scientific.net/AMM.147.270.

Beziat A., Muñoz AM., Chase JG., MacRae GA., Rodgers GW. and Clifton C. (2012) Performance Analysis of Energy Dissipators and Isolators Placed in Bridges to Prevent Structural Damage in Columns. Journal of Earthquake Engineering (JEE) 16(8): 1113-1131. http://dx.doi.org/10.1080/13632469.2012.713561.

Corman S., Chase JG., MacRae GA. and Rodgers GW. (2012) Development and spectral analysis of an advanced diamond shaped resetable device control law. Engineering Structures 40(1): 1-8. http://dx.doi.org/10.1016/j.engstruct.2012.02.013.

Corman S., MacRae GA., Rodgers GW. and Chase JG. (2012) Nonlinear design and sizing of semi-active resetable dampers for seismic performance. Engineering Structures 39: 139-147. http://dx.doi.org/10.1016/j.engstruct.2012.01.015.

Khoo HH., Clifton C., Butterworth J., MacRae G. and Ferguson G. (2012) Influence of steel shim hardness on the Sliding Hinge Joint. Journal of Constructional Steel Research 72: 119-129. http://dx.doi.org/10.1016/j.jcsr.2011.11.009.

Khoo HH., Clifton C., Butterworth J., MacRae G., Gledhill S. and Sidwell G. (2012) Development of the self-centering Sliding Hinge Joint with friction ring springs. Journal of Constructional Steel Research 78: 201-211. http://dx.doi.org/10.1016/j.jcsr.2012.07.006.

Labise CC., Rodgers GW., MacRae GA. and Chase JG. (2012) Viscous and hysteretic damping. Bulletin of the New Zealand Society for Earthquake Engineering 45(1): 23-30. http://dx.doi.org/10.5459/bnzsee.45.1.23-30.

Labise CC., Rodgers GW., MacRae GA. and Chase JG. (2012) Viscous and hysteretic damping: Impact of capacity design violation in augmented structural systems. Bulletin of the New Zealand Society for Earthquake Engineering 45(1): 23-30.

MacRae GA. (2012) Lessons from the February 2011 M6.3 Christchurch Earthquake. Journal of Seismology and Earthquake Engineering 14(3): 227-238.

Rodgers G., Chase JG., Roland T. and MacRae GA. (2012) Spectral analysis for a semi-active-passive net-zero base-shear design concept. Earthquake Engineering and Structural Dynamics 41(8): 1207-1216. http://dx.doi.org/10.1002/eqe.1177.

Sadashiva VK., MacRae GA. and Deam BL. (2012) Seismic response of structures with coupled vertical stiffness-strength irregularities. Earthquake Engineering & Structural Dynamics 41(1): 119-138. http://dx.doi.org/10.1002/eqe.1121.

Sadashiva VK., MacRae GA., Deam BL. and Spooner MS. (2012) Quantifying the Seismic Response of Structures with Flexible Diaphragms. Earthquake Engineering and Structural Dynamics 41(10): 1365-1389. http://dx.doi.org/10.1002/eqe.1187.

Bacht T., Chase JG., MacRae G., Rodgers GW., Rabczuk T., Dhakal RP. and Desombre J. (2011) HF2V dissipator effects on the performance of a 3 story moment frame. Journal of Constructional Steel Research 67(12): 1843-1849. http://dx.doi.org/10.1016/j.jcsr.2011.05.007.

Bruneau M., Clifton C., MacRae G., Leon R., Fussell A. and Martin PO. (2011) Comportement des Batiments Metalliques lors des Seismes de Christchurch, Nouvelle-Zealande, en 2010 et 2011 (The behaviour of steel buildings during the 2010 and 2011 earthquakes in Christchurch, New Zealand). Revue Construction Métallique 4: 3-25.

Clifton C., Bruneau M., MacRae G., Leon R. and Fussell A. (2011) Steel structures damage from the Christchurch earthquake series of 2010 and 2011. Bulletin of the New Zealand Society for Earthquake Engineering 44(4): 297-318.

Desombre J., Rodgers GW., MacRae GA., Rabczuk T., Dhakal RP. and Chase JG. (2011) Experimentally Validated FEA Models of HF2V Damage Free Steel Connections for Use in Full Structural Analyses. Structural Engineering and Mechanics 37(4).

Dhakal RP., MacRae GA. and Hogg K. (2011) Performance of ceilings in the February 2011 Christchurch earthquake. Bulletin of the New Zealand Society for Earthquake Engineering 44(4): 377-387.

MacRae GA. (2011) 22 February Christchurch Earthquake: questions regarding the design process. SESOC Journal: Journal of the Structural Engineering Society New Zealand 24(1): 8-10.

MacRae GA., Myint UT. and Jain SK. (2011) Steps in earthquake proofing a country - a case study of Myanmar. Bulletin of the New Zealand Society for Earthquake Engineering 44(2): 87-98.

Nayyerloo M., Chase JG., MacRae GA. and Chen XQ. (2011) LMS-based approach to structural health monitoring of nonlinear hysteretic structures. Structural Health Monitoring 10(4): 429-444. http://dx.doi.org/10.1177/1475921710379519.

Nayyerloo M., Chase JG., Millane A., Muller C., Malherbe A., Chen X. and MacRae GA. (2011) Seismic structural displacement measurement using a line-scan camera: camera-pattern calibration and experimental validation. Journal of Civil Structural Health Monitoring 1(3-4): 113-124. http://dx.doi.org/10.1007/s13349-011-0012-x.

Sadashiva VK., MacRae GA. and Deam BL. (2011) Effects of coupled vertical stiffness-strength irregularity due to modified interstorey height. Bulletin of the New Zealand Society for Earthquake Engineering 44(1): 31-44.

Tagawa H., Macrae G. and Lowes L. (2011) Erratum: Continuous column effects of gravity columns in U.S. steel moment-resisting frame structures (Journal of Structural and Construction Engineering (2010) 75:650 (761-770)). Journal of Structural and Construction Engineering 76(662): 761-770.

Bradley BA., Cubrinovski M., Dhakal RP. and MacRae GA. (2010) Probabilistic seismic performance and loss assessment of a bridge-foundation-soil system. Soil Dynamics and Earthquake Engineering 30(5): 395-411. http://dx.doi.org/10.1016/j.soildyn.2009.12.012.

Bradley BA., Dhakal RP., MacRae GA. and Cubrinovski M. (2010) Prediction of spatially distributed seismic demands in specific structures: Ground motion and structural response. Earthquake Engineering and Structural Dynamics 39(5): 501-520. http://dx.doi.org/10.1002/eqe.954.

Bradley BA., Dhakal RP., MacRae GA. and Cubrinovski M. (2010) Prediction of spatially distributed seismic demands in specific structures: Structural response to loss estimation. Earthquake Engineering and Structural Dynamics 39(6): 591-613. http://dx.doi.org/10.1002/eqe.955.

Bruneau M., Anagnostopoulou M., MacRae G., Clifton GC. and Fussell A. (2010) Preliminary Report on Steel Building Damage from the Darfield Earthquake of September 4, 2010. Bulletin of the New Zealand Society for Earthquake Engineering 43(4): 351-359.

MacRae GA., Clifton GC., Mackinven H., Mago N., Butterworth J. and Pampanin S. (2010) The Sliding Hinge Joint Moment Connection. Bulletin of the New Zealand Society for Earthquake Engineering 43(3): 202-212.

MacRae GA., Lu AYC., Peng BHH., Hahn C., Ziemian R. and Clifton GC. (2010) Plastic Hinge Locations In Steel Columns. Bulletin of the New Zealand Society of Earthquake Engineering 43(1): 7-12.

Nayyerloo M., Chase JG., MacRae GA., Chen XQ. and Hann C. (2010) Structural Health Monitoring using Adaptive LMS Filters. International Journal of Computer Applications in Technology (IJCAT) 39(1/2/3): 130-136. http://dx.doi.org/10.1504/IJCAT.2010.034741.

Tagawa H., MacRae G. and Lowes L. (2010) Continuous Column Effects of Gravity Columns in U.S. Steel Moment-Resisting Frame Structures - Continuous Column Effects in Steel Moment Frames in Perspective of Dynamic Stability, Part 2. Journal of Structural and Constructional Engineering, Transactions of the Architectural Institute of Japan 75(650): 761-770. http://dx.doi.org/10.3130/aijs.75.761.

Bradley B., Cubrinovski M., Dhakal R. and MacRae G. (2009) Intensity measures for the seismic response of pile foundations. Soil Dynamics and Earthquake Engineering 29(6): 1046-1058. http://dx.doi.org/10.1016/j.soildyn.2008.12.002.

Bradley BA., Cubrinovski M., MacRae GA. and Dhakal RP. (2009) Ground-Motion Prediction Equation for SI Based on Spectral Acceleration Equations. Bulletin of the Seismological Society of America 99(1): 277-285. http://dx.doi.org/10.1785/0120080044.

Bradley BA., Dhakal RP., Cubrinovski M., MacRae GA. and Lee DS. (2009) Seismic loss estimation for efficient decision making. Bulletin of the New Zealand Society of Earthquake Engineering 42(2): 96-110.

Fenwick R. and MacRae GA. (2009) Comparison of New Zealand standards used for seismic design of concrete buildings. Bulletin of the New Zealand Society for Earthquake Engineering 42(3): 187-203.

Lu AYC., MacRae GA., Ziemian RD., Hann C., Peng BHH. and Clifton GC. (2009) Extended direct analysis of steel frames. SESOC Journal: Journal of the Structural Engineering Society New Zealand 22(2): 89-102.

MacRae GA., Urmson CR., Walpole WR., Moss P., Hyde K. and Clifton GC. (2009) Axial shortening of steel columns in buildings subjected to earthquakes. Bulletin of the New Zealand Society for Earthquake Engineering 42(4): 275-287.

Mander TJ., Rodgers GW., Chase JG., Mander JB., MacRae GA. and Dhakal R. (2009) Damage avoidance design steel beam-column moment connection using high-force-to-volume dissipators. Journal of Structural Engineering 135(11): 1390-1397. http://dx.doi.org/10.1061/(ASCE)ST.1943-541X.0000065.

Sadashiva VK., MacRae GA. and Deam BL. (2009) Determination of structural irregularity limits - mass irregularity example. Bulletin of the New Zealand Society for Earthquake Engineering 42(4): 288-301.

Butterworth J., Clifton C. and MacRae G. (2008) Developments in steel frame joints in New Zealand. Structural Engineer 86(16): 20-21.

Butterworth J., Clifton C. and MacRae G. (2008) Developments in steel frame joints. The Structural Engineer 86(16): 20-21.

Peng BHH., MacRae GA., Walpole WR., Moss P., Dhakal R. and Clifton C. (2008) Plastic hinge location in columns of steel frames subjected to seismic actions. Bulletin of the New Zealand Society for Earthquake Engineering 41(1): 1-9.

Peng BHH., MacRae GA., Walpole WR., Moss P., Dhakal R., Hyland C. and Clifton C. (2008) Location of Plastic Hinges in Axially Loaded Steel Members. Journal of Constructional Steel Research 64(3): 344-351. http://dx.doi.org/10.1016/j.jcsr.2007.08.004.

Tagawa H., MacRae GA. and Lowes L. (2008) Probabilistic evaluation of seismic performance of 3-story 3D one- and two-way steel moment-frame structures. Earthquake Engineering & Structural Dynamics 37(5): 681-696. http://dx.doi.org/10.1002/eqe.778.

Bradley B., Dhakal RP., Cubrinovski M., Mander JB. and MacRae GA. (2007) Improved seismic hazard model with application to probabilistic seismic demand analysis. Earthquake Engineering and Structural Dynamics 36(14): 2211-2225. http://dx.doi.org/10.1002/eqe.727.

Tagawa H., MacRae GA. and Lowes L. (2007) Evaluation of Seismic Response of Multi-Story Structures Using Dynamic Stability Coefficients - Continuous Column Effects in Steel Moment Frames in Perspective of Dynamic Stability. Journal of Structural and Construction Engineering, Transactions of AIJ. 618: 57-64.

Umarani C. and MacRae GA. (2007) A New Concept For Consideration Of Slab Effects On Building Seismic Performance. Journal of Structural Engineering (Madras) 34(1): 25-32.

Tagawa H., MacRae G. and Lowes L. (2006) Evaluation of simplification of 2D moment frame to 1D MDOF coupled shear-flexural-beam model. Journal of Structural and Construction Engineering, Architectural Institute of Japan 609: 41-48.

Tagawa H., MacRae GA. and Lowes LN. (2006) Hysteresis Loop Effects on Stability and Maximum Drift of Structures. Journal of Structural and Construction Engineering, Architectural Institute of Japan 602: 137-144.

Kimura Y. and MacRae GA. (2005) Effect of column flexural stiffness and strength on story drift concentration mechanism of 2 story braced frames with fixed column base: Restraint effect of sub-resistant elements on drift concentration of dual systems. Architectural Institute of Japan (AIJ) Journal of Structural and Construction Engineering 593: 153-160.

Roeder CW., MacRae GA., Leland A. and Rospo A. (2005) Extending the Fatigue Life of Riveted Coped Stringer Connections. Journal of Bridge Engineering 10(1): 69-76.

Kim J., Stanton J. and MacRae G. (2004) Effect of Beam Growth on Reinforced Concrete Frames. Journal of Structural Engineering 130(9): 1333-1342.

MacRae G., Roeder CW., Gunderson C. and Kimura Y. (2004) Brace-Beam-Column Connections for Concentrically Braced Frames with Concrete Filled Tube Columns. Journal of Structural Engineering 130(2): 233-243.

MacRae GA., Kimura Y. and Roeder CW. (2004) Effect of Column Stiffness on Braced Frame Seismic Behavior. Journal of Structural Engineering 130(3): 381-391.

Kimura Y. and MacRae GA. (2002) The effect of the column flexural stiffness on story drift concentration mechanism of 2 story braced frames. Architectural Institute of Japan (AIJ) Journal of Structural and Construction Engineering 560: 189-195.

Roeder CW., MacRae GA. and Scott K. (2002) Seismic performance of older steel frame mill buildings. Journal of Constructional Steel Research 58(5-8): 759-777.

Kimura Y., Tagawa H., Lehman D. and MacRae GA. (2001) Report of Damage to Building Structures Cause by the Nisqually Earthquake in 2001. Architectural Institute of Japan (AIJ) Journal of Technology and Design 14: 373-376.

MacRae GA. and Kawashima K. (2001) Seismic Behavior of Hollow Stiffened Steel Bridge Columns. Journal of Bridge Engineering 6(2): 110-119.

MacRae GA. and Tagawa H. (2001) Seismic Behavior of 3D Steel Moment Frame with Biaxial Columns. Journal of Structural Engineering 127(5): 490-497.

MacRae GA., Morrow DV. and Roeder CW. (2001) Near-Fault Ground Motion Effects on Simple Structures. Journal of Structural Engineering 127(9): 996-1004.

MacRae GA. and Mattheis J. (2000) Three-Dimensional Steel Building Response to Near-Fault Motions. Journal of Structural Engineering 126(1): 117-126.

Roeder CW., MacRae GA., Crocker P., Arima K. and Wong S. (2000) Dynamic Response and Fatigue of Steel Tied-Arch Bridge. Journal of Bridge Engineering 5(1): 14-21.

Kawashima K., MacRae GA., Hoshikuma J. and Nagaya K. (1998) Residual Displacement Response Spectrum. ASCE Journal of Structural Engineering 124(5): 523-530.

MacRae GA. and Kawashima K. (1997) Post-Earthquake Residual Displacements of Bilinear Oscillators. Earthquake Engineering and Structural Dynamics 26(7): 701-716. http://dx.doi.org/10.1002/(SICI)1096-9845(199707)26:7<701::AID-EQE671>3.0.CO;2-I.

Priestley MJN., Seible F., MacRae GA. and Chai YH. (1997) Seismic Assessment of the Santa Monica Viaduct Bent Details. ACI Structural Journal 94(5): 513-524.

Priestley MJN. and MacRae GA. (1996) Seismic Tests of Precast Beam-to-Column Joint Subassemblages with Unbonded Tendons. PCI Journal : 64-80.

Kowalsky MJ., Priestley MJN. and MacRae GA. (1995) Displacement-Based Design of RC Bridge Columns in Seismic Regions. Earthquake Engineering and Structural Dynamics 24(12): 1623-1643. http://dx.doi.org/10.1002/eqe.4290241206.

Kawashima K., MacRae GA., Hoshikuma J. and Nagaya K. (1994) Residual Displacement Response Spectrum and Its Application. Journal of the Japan Society of Civil Engineers 501(I-29): 183-192.

MacRae GA. (1994) P‐Δ Effects on Single-Degree-of-Freedom Structures in Earthquakes. Earthquake Spectra 10(3): 539-568. http://dx.doi.org/10.1193/1.1585788.

Conference Contributions - Published

Bruneau M. and MacRae G.. (2019) Reconstructing a very different Christchurch: How the 2011 earthquakes have driven decisions on selection of structural systems. In COMPDYN Proceedings 1: 1-12.

Alizadeh S., MacRae GA., Bull D. and Clifton GC. (2018) Beam Web-Side-Plate Connection Axial Performance. Christchurch, New Zealand: 9th International Conference on Behaviour of Steel Structures in Seismic Areas (STESSA), 14-17 Feb 2018. In Key Engineering Materials 763: 174-181. http://dx.doi.org/10.4028/www.scientific.net/KEM.763.174.

Alizadeh S., MacRae GA., Bull D. and Clifton GC. (2018) Floor Diaphragm In-Plane Modelling Using Elastic Truss Elements. Christchurch, New Zealand: 9th International Conference on Behaviour of Steel Structures in Seismic Areas (STESSA), 14-17 Feb 2018. In Key Engineering Materials 763: 549-556. http://dx.doi.org/10.4028/www.scientific.net/KEM.763.549.

Arifin F., Sullivan T., MacRae GA., Mulligan J., Kurata M. and Takeda T. (2018) Evaluating the Benefits of Retrofitting Vulnerable Non-Structural Components: A Case Study. Auckland, New Zealand: New Zealand Society for Earthquake Engineering Annual Technical Conference (NZSEE 2018), 13-15 Apr 2018.

Bruneau M. and MacRae GA. (2018) Reconstructing Christchurch: Quantitative Findings on Shift in Building Structural Systems. Christchurch, New Zealand: 9th International Conference on Behaviour of Steel Structures in Seismic Areas (STESSA), 14-17 Feb 2018. In Key Engineering Materials 763: 11-17. http://dx.doi.org/10.4028/www.scientific.net/KEM.763.11.

Chaudhari T., MacRae GA., Bull D., Clifton GC. and Hicks S. (2018) Analytical Methodology to Predict the Beam Overstrength considering the Composite Slab Effects. Christchurch, New Zealand: 9th International Conference on Behaviour of Steel Structures in Seismic Areas (STESSA), 14-17 Feb 2018. In Key Engineering Materials 763: 826-834. http://dx.doi.org/10.4028/www.scientific.net/KEM.763.826.

Clifton GC. and MacRae GA. (2018) Lessons from the Field; Steel Structure Performance in Severe Earthquakes in New Zealand from 2010 to 2016. Christchurch, New Zealand: 9th International Conference on Behaviour of Steel Structures in Seismic Areas (STESSA), 14-17 Feb 2018. In Key Engineering Materials 763: 61-71. http://dx.doi.org/10.4028/www.scientific.net/KEM.763.61.

Cui J., Lee C. and MacRae G. (2018) Finite Element Modelling of Buckling Restrained Braces under Combined In-Plane and Out-of-Plane Loading. Christchurch, New Zealand: 9th International Conference on the Behaviour of Steel Structures in Seismic Areas (STESSA), 14-17 Feb 2018. In Key Engineering Materials 763: 908-915. http://dx.doi.org/10.4028/www.scientific.net/KEM.763.908.

Hatami M., MacRae GA., Rodgers G. and Clifton GC. (2018) Numerical Study of Asymmetric Friction Connections (AFC) with Large Grip Length Bolts. Christchurch, New Zealand: 9th International Conference on Behaviour of Steel Structures in Seismic Areas (STESSA), 14-17 Feb 2018. In Key Engineering Materials 763: 600-608. http://dx.doi.org/10.4028/www.scientific.net/KEM.763.600.

Koia R., Needham J., Alizadeh S., Scarry J. and MacRae GA. (2018) Beam Shear Connections. Christchurch, New Zealand: 9th International Conference on Behaviour of Steel Structures in Seismic Areas (STESSA), 14-17 Feb 2018. In Key Engineering Materials 763: 207-215. http://dx.doi.org/10.4028/www.scientific.net/KEM.763.207.

MacRae GA., Clifton GC. and Bruneau M. (2018) New Zealand Research Applications of, and Developments in, Low Damage Technology for Steel Structures. Christchurch, New Zealand: 9th International Conference on Behaviour of Steel Structures in Seismic Areas (STESSA), 14-17 Feb 2018. In Key Engineering Materials 763: 3-10. http://dx.doi.org/10.4028/www.scientific.net/KEM.763.3.

Malhotra R., Ndarowa C., MacRae GA., Palermo A. and Broglio S. (2018) Footfall Induced Vibration Response of a Base-Isolated Steel Building. Christchurch, New Zealand: 9th International Conference on Behaviour of Steel Structures in Seismic Areas (STESSA), 14-17 Feb 2018. In Key Engineering Materials 763: 992-1001. http://dx.doi.org/10.4028/www.scientific.net/KEM.763.992.

Rad A., MacRae GA., Hazaveh N. and Ma Q. (2018) Shake Table Testing of a Low Damage Steel Building with Asymmetric Friction Connections (AFC). Christchurch, New Zealand: 9th International Conference on Behaviour of Steel Structures in Seismic Areas (STESSA), 14-17 Feb 2018. In Key Engineering Materials 763: 400-405. http://dx.doi.org/10.4028/www.scientific.net/KEM.763.400.

Ramhormozian S., Clifton GC., MacRae GA. and Khoo H-H. (2018) The Sliding Hinge Joint: Final Steps towards an Optimum Low Damage Seismic-Resistant Steel System. Christchurch, New Zealand: 9th International Conference on Behaviour of Steel Structures in Seismic Areas (STESSA), 14-17 Feb 2018. In Key Engineering Materials 763: 751-760. http://dx.doi.org/10.4028/www.scientific.net/KEM.763.751.

Saif K., Lee C., Yeow T. and MacRae G. (2018) Seismic Ratchetting of Single-Degree-of-Freedom Steel Bridge Columns. Christchurch, New Zealand: 9th International Conference on the Behaviour of Steel Structures in Seismic Areas (STESSA), 14-17 Feb 2018. In Key Engineering Materials 763: 295-300. http://dx.doi.org/10.4028/www.scientific.net/KEM.763.295.

Tagawa H. and MacRae GA. (2018) Seismic Simulation of U.S. and Japanese Type Steel Moment-Resisting Frame Structures Using Practical FEM Macro Models. Christchurch, New Zealand: 9th International Conference on Behaviour of Steel Structures in Seismic Areas (STESSA), 14-17 Feb 2018. In Key Engineering Materials 763: 557-565. http://dx.doi.org/10.4028/www.scientific.net/KEM.763.557.

Telford J., Sim A., MacRae GA. and Clucas D. (2018) Buckling Restrained Brace Deformation Measuring Device. Christchurch, New Zealand: 9th International Conference on Behaviour of Steel Structures in Seismic Areas (STESSA), 14-17 Feb 2018. In Key Engineering Materials 763: 900-907. http://dx.doi.org/10.4028/www.scientific.net/KEM.763.900.

Tjahjanto H., MacRae GA. and Abu A. (2018) Bidirectional Behaviour of Unstiffened and Stiffened Direct-Welded Connections for Square CFST Columns. Christchurch, New Zealand: 9th International Conference on Behaviour of Steel Structures in Seismic Areas (STESSA), 14-17 Feb 2018. In Key Engineering Materials 763: 764-803. http://dx.doi.org/10.4028/www.scientific.net/KEM.763.794.

Vazquez-Colunga S., Lee C. and MacRae G. (2018) Effects of Out-of-Plane Displacements on Load Capacity of Gusset Plates in Buckling Restrained Braced Frames. Christchurch, New Zealand: 9th International Conference on the Behaviour of Steel Structures in Seismic Areas (STESSA), 14-17 Feb 2018. In Key Engineering Materials 763: 892-899. http://dx.doi.org/10.4028/www.scientific.net/KEM.763.892.

Webb G., Kosinanonth K., Chaudhari T., Alizadeh S. and MacRae GA. (2018) Column Moment Demands from Orthogonal Beam Twisting. Christchurch, New Zealand: 9th International Conference on Behaviour of Steel Structures in Seismic Areas (STESSA), 14-17 Feb 2018. In Key Engineering Materials 763: 259-269. http://dx.doi.org/10.4028/www.scientific.net/KEM.763.259.

Xie R., Chanchi Golondrino J., MacRae GA. and Clifton GC. (2018) Braced Frame Symmetrical and Asymmetrical Friction Connection Performance. Christchurch, New Zealand: 9th International Conference on Behaviour of Steel Structures in Seismic Areas (STESSA), 14-17 Feb 2018. In Key Engineering Materials 763: 216-223. http://dx.doi.org/10.4028/www.scientific.net/KEM.763.216.

Abdolahirad A., MacRae GA., Hazaveh NK. and Ma Q. (2017) Shake Table Testing of Low Damage Steel Building with Asymmetric Friction Connections. Wellington: NZSEE Conference, 27-29 Apr 2017.

Abolahiirad A., MacRae GA., Yeow T. and Bull D. (2017) Dynamically Straightening Of Low-Damage Steel Buildings After Earthquake. Santiago, Chile: 16th World Conference on Earthquake Engineering, 16WCEE 2017, 9-13 Jan 2017.

Alizadeh S., MacRae GA., Bull D. and Clifron GC. (2017) In-Plane Diaphragm Issues for Steel Buildings in Seismic Zones. Santiago, Chile: 16th World Conference on Earthquake Engineering, 16WCEE 2017, 9-13 Jan 2017.

Callow A., Chand A., Lu Y-C., Lee C. and MacRae GA. (2017) Axial-moment interaction and load path dependency for steel columns. Auckland: SESOC Conference, 3-5 Nov 2017. In SESOC Conference Proceedings.

Cook J., Rodgers GW., MacRae GA. and Chase JG. (2017) Testing and Modelling of Prototype Tension-Only Seismic Energy Dissipation Devices. Santiago Chile: 16th World Conference on Earthquake Engineering, 16WCEE 2017, 9-13 Jan 2017.

Djojo G., Clifton GC., Henry R. and MacRae GA. (2017) Experimental Validation of Rocking CBFs with Double Acting Ring Springs. Wellington: NZSEE Conference, 27-29 Apr 2017. In NZSEE Annual Conference.

Jones A., Lee CL. and MacRae GA. (2017) Design and Behaviour of Buckling Restrained Braces. Santiago, Chile: 16th World Conference on Earthquake Engineering, 16WCEE 2017, 9-13 Jan 2017.

Kordani R., Rodgers G. and MacRae GA. (2017) Sensitivity Analysis on Post-Tensioning Loss in Structural Rocking Walls. Wellington: NZSEE Conference, 27-29 Apr 2017.

Ladani FT., MacRae GA., Chase JG. and Clifton GC. (2017) Flexural Properties Of Bolted Wide Flange Column Splices. Santiago Chile: 16th World Conference on Earthquake Engineering, 16WCEE 2017, 9-13 Jan 2017.

MacRae GA. and Clifton GC. (2017) New Zealand Research Applications of, and Developments in, Low Damage Technology for Steel Structures. Santiago Chile: 16th World Conference on Earthquake Engineering, 16WCEE 2017, 9-13 Jan 2017.

MacRae GA. and Clifton GC. (2017) Recent NZ Applications of, and Developments in, Low Damage Technology for Steel Structures. Wellington: New Zealand Society for Earthquake Engineering Annual Conference, 27-29 Apr 2017. In NZSEE Annual Conference Proceedings.

Malek A., Scott A., Pampanin S. and MacRae GA. (2017) Damage Evaluation And Residual Capacity of Concrete in Damaged RC Columns. Santiago, Chile: 16th World Conference on Earthquake Engineering, 9-13 Jan 2017.

Pourali A., Dhakal R., MacRae GA. and Tasligedik S. (2017) Fully-Floating Suspended Ceiling System: Experimental Evaluation of the Effect Of Mass And Elastic Isolation. Santiago Chile: 16th World Conference on Earthquake Engineering, 16WCEE 2017, 9-13 Jan 2017.

Ramhormozian S., Clifton GC., Takayama Y., Lam J. and MacRae GA. (2017) Self-Centring Capability of the Seismic Friction Dampers: A Conceptual Study on the Static and Dynamic Self-Centring Requirements for the Single Degree of Freedom (SDOF) Asymmetric and Symmetric Friction Connections (AFC and SFC). Wellington: NZSEE Conference, 27-29 Apr 2017.

Ramhormozian S., Clifton GC., van Bergen B., White M. and MacRae GA. (2017) An Experimental Study on the Asymmetric Friction Connection (AFC) Optimum Installed Bolt Tension. Wellington: NZSEE 2017 Annual Conference, 27-29 Apr 2017. In NZSEE 2017 Annual Conference Proceedings.

Saif KZ., Lee CL., MacRae GA. and Yeow TZ. (2017) Effect of eccentric moments on seismic ratcheting of single-degree-of-freedom structures. Wellington: 2017 NZSEE Conference, 27-29 Apr 2017.

Sitler B., MacRae GA., Takeuchi T., Matsui R., Westeneng B. and Jones A. (2017) BRB Performance Issues. Santiago Chile: 16th World Conference on Earthquake, 9-13 Jan 2017.

Tagawa H., Nagae T., MacRae GA. and Lowes L. (2017) Collapse Simulation of U.S. and Japanese Type Steel Moment-resisting Frame Structures using Practical Macro Models with Beam and Shell Elements. Santiago Chile: 16th World Conference on Earthquake Engineering, 16WCEE 2017, 9-13 Jan 2017.

Takeuchi T., Matsui R., Sitler B. and MacRae GA. (2017) State-of-Art Stability Assessment of Buckling-restrained Braces including Connections. Santiago, Chile: 16th World Conference on Earthquake Engineering, 16WCEE 2017, 9-13 Jan 2017.

Weir C., Clarke H., MacRae GA., Scarry J. and Alizadeh S. (2017) Web Side Plate Connections Under Axial Load. Wellington: NZSEE 2017 Conference, 27-29 Apr 2017.

Westeneng B., Lee CL., MacRae GA. and Jones A. (2017) Out-of-Plane Buckling Behaviour and Design of BRB Gusset Plate Connections. Santiago Chile: 16th World Conference on Earthquake, 9-13 Jan 2017.

Abdolahirad A., MacRae GA. and Bull D. (2016) Dynamically Straightening of Low-Damage Steel Buildings after Earthquake, Paper O-41.. Wigram, Christchurch, New Zealand. 1-4 April 2016.: NZSEE Conference, 1-4 Apr 2016.

Chanchi Golondrino J., MacRae G., Chase J., Rodgers G. and Clifton GC. (2016) Effects of the bolt grip length on the behaviour of Asymmetrical Friction Connections (AFC). Christchurch, New Zealand: New Zealand Society for Earthquake Engineering (NZSEE) Conference, 1-3 Apr 2016. : 8.

Cook J., Rodgers GW., MacRae GA. and Chase JG. (2016) Assessment of the structural response and cumulative displacement demand of Grip 'n' Grab tension-only bracing system. Christchurch, New Zealand: New Zealand Society for Earthquake Engineering (NZSEE) Conference, 1-3 Apr 2016. : 8.

Dhakal R., Pourali A., MacRae G. and Tasligedik AS. (2016) Experimental Evaluation of the Influence of Seismic Clips on Grid Joints in a Suspended Ceiling System. Nara, Japan: 16th US-Japan-NZ Workshop on the Improvement of Structural Engineering and Resiliency, 27 Jun 2006-29 Jun 2016. : 8.

Ebrahami Koopaee M., Dhakal R. and MacRae GA. (2016) Seismic Collapse Probability Prediction of an RC Frame Building Using Various Ground Motion Selection Methods. Wigram, Christchurch, New Zealand: NZSEE Conference, 1-4 Apr 2016.

Khanlou A., MacRae GA., Scott A., Hicks S., Clifton C., Leon R. and Gholamhoseini A. (2016) Composite Slab Crack Widths Considering Shrinkage and Gravity Loading. North Queensland, Australia: International Conference on Composite Construction in Steel and Concrete 2013, 28-31 Jul 2013. In Composite Construction in Steel and Concrete VII: 754-762. http://dx.doi.org/10.1061/9780784479735.

Khanlou A., MacRae GA., Scott A., Hicks S., Clifton C., Leon R. and Gholamhoseini A. (2016) Composite Slab Crack Widths Considering Shrinkage and Gravity Loading. North Queensland, Australia: International Conference on Composite Construction in Steel and Concrete 2013, 28-31 Jul 2013. In Composite Construction in Steel and Concrete VII: 754-762. http://dx.doi.org/10.1061/9780784479735.

MacRae GA., Clifton GC. and Bruneau M. (2016) Some NZ Earthquake Lessons and Better Building Construction. Melbourne, Australia: Australian Earthquake Engineering Society Conference, 25-27 Nov 2016.

MacRae GA., Pourali A., Dhakal R. and Tasligedik AS. (2016) Seismic Design of Suspended Ceilings: Review and Recommendations. Wigram, Christchurch, New Zealand: NZSEE Conference, 1-4 Apr 2016.

MacRae GA., Yeow TZ. and Dhakal R. (2016) Content Sliding Research at the University of Canterbury. University of Canterbury (UC), Ilam, Christchurch, New Zealand: Third International Workshop on Seismic Performance of Non-Structural Elements (SPONSE), 31-31 Mar 2016.

Malek A., Scott ACN., Pampanin S., MacRae GA. and Hoult N. (2016) Damage Assessment of RC Beam Using Distributed Fibre Optics Strain Sensors. Wigram, Christchurch: NZSEE Conference, 1-4 Apr 2016.

Ramhormozian S., Clifton GC., Cvitanich D., Maetzig S. and MacRae GA. (2016) Recent Developments on the Sliding Hinge Joint. Wigram, Christchurch: NZSEE Conference, 1-4 Apr 2016.

Ramhormozian S., Clifton GC., Maetzig S., Cvitanich D. and MacRae GA. (2016) Influence of the Asymmetric Friction Connection (AFC) Ply Configuration, Surface Condition, And Material On The AFC Sliding Behaviour. Wigram, Christchurch, New Zealand: NZSEE Conference, 1-4 Apr 2016.

Tagawa H., MacRae GA. and Nagae T. (2016) Seismic Simulation Of Japanese and U.S. Type Steel Moment-Resisting Frame Structures: Macro Modeling With Beam And Shell Elements. Mukogawa Women's University, Nishinomiya, Japan: 4th International Conference on Archi-Cultural Interactions through the Silk Road (iaSU2016), 16-18 Jul 2016.

Westeneng B., Lee CL. and MacRae GA. (2016) Prevention of Gusset Plate Out-of-Plane Sway Buckling Failure in Buckling Restrained Braced Frames. Christchurch, New Zealand: 2016 NZSEE Conference, 1-3 Apr 2016.

Abdolahirad A., MacRae GA., Yeow TZ. and Bull D. (2015) Earthquake Sequence Effect on Steel Building. Shanghai, China: 8th International Conference on Behavior of Steel Structures in Seismic Areas (STESSA 2015), 1-4 Jul 2015. In STESSA 2015 Proceedings: 1063-1069.

Ainsworth JB., Conlan CJ., Clifton GC. and MacRae GA. (2015) Influence of column base rotational stiffness and non-structural elements on moment resisting steel frame building response to severe earthquakes. Rotorua, New Zealand: 2015 New Zealand Society for Earthquake Engineering Annual Conference (NZSEE), 10-12 Apr 2015. In 2015 NZSEE Conference Proceedings: 10pp.

Borzouie J., MacRae GA., Chase JG., Rodgers GW. and Clifton GC. (2015) Column Base Weak Axis Aligned Asymmetric Friction Connection Cyclic Performance. Shanghai, China: 8th International Conference on Behavior of Steel Structures in Seismic Areas (STESSA 2015), 1-4 Jul 2015. In STESSA 2015 Proceedings: 512-519.

Chanchi Golondrino J., MacRae GA., Chase JG., Rodgers GW. and Clifton GC. (2015) Velocity Effects On The Behaviour Of Asymmetrical Friction Connections (AFC). Shanghai, China: 8th International Conference on Behavior of Steel Structures in Seismic Areas (STESSA 2015), 1-4 Jul 2015. In STESSA 2015 Proceedings: 8pp.

Chanchi Golondrino J., Xie R., MacRae GA., Chase GJ., Rodgers G. and Clifton GC. (2015) Low damage brace using a Symmetrical Friction Connection (SFC) detail. Rotorua, New Zealand: 2015 New Zealand Society for Earthquake Engineering Annual Conference (NZSEE), 10-12 Apr 2015. In 2015 NZSEE Conference Proceedings: 8pp.

Chanchi Golondrino J., Xie R., MacRae GA., Chase JG., Rodgers GW. and Clifton C. (2015) Braced Frame Using Asymmetrical Friction Connections (AFC). Shanghai, China: 8th International Conference on Behavior of Steel Structures in Seismic Areas (STESSA 2015), 1-4 Jul 2015. In STESSA 2015 Proceedings: 8pp.

Chaudhari TD., MacRae GA., Bull D., Chase JG., Hicks S., Clifton GC. and Hobbs M. (2015) Composite Slab Effects On Beam-Column Subassembly Seismic Performance. Shanghai, China: 8th International Conference on Behavior of Steel Structures in Seismic Areas (STESSA 2015), 1-4 Jul 2015. In STESSA 2015 Proceedings: 5pp.

Cook J., Rodgers GW., MacRae GA. and Chase JG. (2015) Development of a ratcheting, tension-only fuse mechanism for seismic energy dissipation. Rotorua, New Zealand: 2015 New Zealand Society for Earthquake Engineering Annual Conference (NZSEE), 10-12 Apr 2015. In 2015 NZSEE Conference Proceedings: 9pp.

Djojo GS., Clifton GC., Henry RS. and MacRae GA. (2015) Experimental Testing of a Double Acting Ring Spring System for Use in Rocking Steel Shear Walls. Shanghai, China: 8th International Conference on Behavior of Steel Structures in Seismic Areas (STESSA 2015), 1-4 Jul 2015. In STESSA 2015 Proceedings: 1245-1252.

Gharahshir N., Gholamhoseini A., MacRae GC. and Clifton GC. (2015) Stiffness of Composite CFST Columns. Auckland, New Zealand: 2nd Steel Innovations Conference (SCNZ 2015), 3-4 Sep 2015.

Gholamhoseini A., Khanloo A., MacRae GA., Scott A., Hicks S. and Leon R. (2015) Ultimate Strength of Reinforced and Steel Fibre Reinforced Concrete (SFRC) Continuous Composite Slabs (An Experimental Study). Auckland, New Zealand: 2nd Steel Innovations Conference (SCNZ 2015), 3-4 Sep 2015.

Hatami M., Brozouie J., MacRae GA., Yekrangnia M. and Abubakar S. (2015) Finite Element Analysis of Column Base Weak Axis Aligned Asymmetric Friction Connection (WAFC). Shanghai, China: 8th International Conference on Behavior of Steel Structures in Seismic Areas (STESSA 2015), 1-4 Jul 2015. In STESSA 2015 Proceedings: 504-511.

Iihoshi C., MacRae GA., Rodgers GW. and Chase JG. (2015) Dynamic Behavior of a Slab Sliding System. Cairo, Egypt: 14th International Conference on Structural & Geotechnical Engineering (ICSGE 2015), 20-22 Dec 2015. In ICSGE Proceedings: 6pp.

Ladani FT., MacRae GA. and Chase JG. (2015) Effects of Column Splice Location on Seismic Demands in Steel Moment Frames Considering Splice Flexibility. Auckland, New Zealand: 2nd Steel Innovations Conference (SCNZ 2015), 3-4 Sep 2015.

Leung HK., Clifton GC., Khoo HH. and MacRae GA. (2015) Experimental Studies of Eccentrically Braced Frame with Rotational Bolted Active Links. Shanghai, China: 8th International Conference on Behavior of Steel Structures in Seismic Areas (STESSA 2015), 1-4 Jul 2015. In STESSA 2015 Proceedings: 1055-1062.

Luo F., Gholamhoseini A. and MacRae GA. (2015) Analytical Study of Seismic Behaviour of Composite Slabs. Auckland, New Zealand: 2nd Steel Innovations Conference (SCNZ 2015), 3-4 Sep 2015.

MacRae GA. (2015) Better Structures. Tokyo Institute of Technology, Yokohama, Japan: Structural Engineering Frontier Conference, 18-19 Mar 2015.

MacRae GA. and Clifton GC. (2015) New Zealand Research on Steel Structures in Seismic Areas. Shanghai, China: 8th International Conference on Behavior of Steel Structures in Seismic Areas (STESSA 2015), 1-4 Jul 2015. In STESSA 2015 Proceedings: 44-58.

MacRae GA. and Clifton GC. (2015) Research on Seismic Performance of Steel Structures. Auckland, New Zealand: 2nd Steel Innovations Conference (SCNZ 2015), 3-4 Sep 2015.

Macrae GA., Clifton GC., Bruneau M., Kanvide A. and Gardiner S. (2015) Lessons from Steel Structures in Christchurch Earthquakes. Shanghai, China: 8th International Conference on Behavior of Steel Structures in Seismic Areas (STESSA 2015), 1-4 Jul 2015.

Malek A., Scott A., Pampanin S. and MacRae GA. (2015) Assessment of Post-Earthquake Damage in RC Elements Using Low-Invasive Techniques. Rotorua, New Zealand: 2015 New Zealand Society for Earthquake Engineering Annual Conference (NZSEE), 10-12 Apr 2015. In 2015 NZSEE Conference Proceedings: 12pp.

Pourali A., Dhakal RP., Macrae GA. and Tasligedik A. (2015) Fully-Floating Suspended Ceiling System: Experimental Evaluation of Structural Feasibility and Challenges. Sydney, Australia: 10th Pacific Conference on Earthquake Engineering, 6-8 Nov 2015.

Pourali A., Dhakal RP., MacRae GA. and Tasligedik A. (2015) Shake Table Tests of Perimeter-Fixed Type Suspended Ceilings. Rotorua, New Zealand: 2015 NZSEE Conference, 12-12 Apr 2015.

Pourali A., Dhakal RP., MacRae GA. and Tasligedik AS. (2015) Shake table tests of perimeter-fixed type suspended ceilings. Rotorua, New Zealand: 2015 New Zealand Society for Earthquake Engineering Annual Conference (NZSEE), 10-12 Apr 2015. In 2015 NZSEE Conference Proceedings: 12pp-12pp.

Ramhormozian S., Clifton GC., MacRae GA. and Khoo HH. (2015) Improving the Seismic Behaviour of the Sliding Hinge Joint Using Belleville Springs. Shanghai, China: 8th International Conference on Behavior of Steel Structures in Seismic Areas (STESSA 2015), 1-4 Jul 2015. In STESSA 2015 Proceedings: 549-557.

Ramhormozian S., Clifton GC., MacRae GA. and Khoo HH. (2015) The High Strength Friction Grip Property Class 8.8 Bolts: Variability of Installed Tension and Potential Resulting Effects on the Friction-type Connections' Behaviour. Rotorua, New Zealand: 2015 New Zealand Society for Earthquake Engineering Annual Conference (NZSEE), 10-12 Apr 2015. In 2015 NZSEE Conference Proceedings: 9pp.

Ramhormozian S., Clifton GC., MacRae GA. and Khoo HH. (2015) The Optimum Use of Belleville Springs in the Asymmetric Friction Connection. Shanghai, China: 8th International Conference on Behavior of Steel Structures in Seismic Areas (STESSA 2015), 1-4 Jul 2015. In STESSA 2015 Proceedings: 558-565.

Tjahjanto H., MacRae G., Abu A., Clifton C., Beetham T. and Mago N. (2015) Behavior of External Diaphragm Connections for Square CFST Columns under Bidirectional Loading. Auckland, New Zealand: 2nd Steel Innovations Conference (SCNZ 2015), 3-4 Sep 2015.

Tjahjanto H., MacRae G., Abu A., Clifton C., Beetham T. and Mago N. (2015) Behavior of External Diaphragm Connections for Square CFST Columns under Bidirectional Loading. Shanghai, China: 8th International Conference on Behavior of Steel Structures in Seismic Areas (STESSA 2015), 1-4 Jul 2015. In Proceedings: 8pp.

Westeneng BA., Lee CL. and MacRae GA. (2015) Early Failure of Gusset Plates In Buckling Restrained Brace Frames. Auckland, New Zealand: 2nd Steel Innovations Conference (SCNZ 2015), 3-4 Sep 2015.

Xie R., Chanchi Golondrino J., MacRae GA., Chase G., Rodgers G. and Clifton C. (2015) Hysteretic Behaviour of a Frame Using a Brace Equipped with an Asymmetrical Friction Connection (AFC). Auckland, New Zealand: 2nd Steel Innovations Conference (SCNZ 2015), 3-4 Sep 2015.

Yeow TZ., MacRae GA. and Dhakal R. (2015) Effect of Strength and Stiffness on Single-Storey Buildings on Content Sliding Response in Earthquakes. Shanghai, China: 8th International Conference on Behavior of Steel Structures in Seismic Areas (STESSA 2015), 1-4 Jul 2015. In STESSA 2015 Proceedings: 1047-1054.

Yeow TZ., MacRae GA. and Dhakal RP. (2015) Incorporating content sliding into seismic building performance assessments. Rotorua, New Zealand: 2015 New Zealand Society for Earthquake Engineering Annual Conference (NZSEE), 10-12 Apr 2015.

Cain L., Riley-Smith H., Yeow TZ., Macrae GA. and Dhakal RP. (2014) Building content sliding demand: Analytical studies of contents in elastic MDOF structures. Auckland, New Zealand: 2014 New Zealand Society for Earthquake Engineering Annual Conference (NZSEE), 21-23 Mar 2014. : 8pp.

Chanchi Golondrino J., Xie R., MacRae GA., Chase JG., Rodgers GW. and Clifton C. (2014) Low damage braces using Asymmetrical Friction Connections (AFC). Auckland, New Zealand: 2014 New Zealand Society for Earthquake Engineering Annual Conference (NZSEE), 21-23 Mar 2014. : 9pp.

Iihoshi C., MacRae GA., Rodgers GW. and Chase JG. (2014) Viability of Slab Sliding System for Single Story Structure. Barcelona, Spain: International Conference on Earthquake Engineering (ICEE 2014), 27-28 Feb 2014. : 5pp.

Jones AS., Lee CL., MacRae GA. and Clifton GC. (2014) Review of buckling restrained brace design and behaviour. Auckland, New Zealand: 2014 New Zealand Society for Earthquake Engineering Annual Conference (NZSEE), 21-23 Mar 2014. : 8pp.

Pourali A., Dhakal RP. and MacRae GA. (2014) Seismic performance of suspended ceilings: Critical review of current design practice. Auckland, New Zealand: 2014 New Zealand Society for Earthquake Engineering Annual Conference (NZSEE), 21-23 Mar 2014. : 8pp.

Yeow TZ., MacRae GA., Dhakal RP. and Bradley BA. (2014) Experimental studies on the sliding behavior of building contents. Anchorage, AK, USA: 10th US National Conference on Earthquake Engineering (NCEE10), 21-26 Jul 2014. : 10pp.

Yeow TZ., MacRae GA., Dhakal RP. and Bradley BA. (2014) Preliminary experimental verification of current content sliding modelling techniques. Auckland, New Zealand: 2014 New Zealand Society for Earthquake Engineering Annual Conference (NZSEE), 21-23 Mar 2014. : 8pp.

Chanchí Golondrino J., MacRae GA., Abu AK., Chase JG., Rodgers GW., Fu B. and Clifton GC. (2013) Post-Fire Hysteretic Behavior of Asymmetrical Friction Connections. Singapore: 10th Pacific Structural Steel Conference (PSSC 2013), 8-11 Oct 2013. : 548-553. http://dx.doi.org/10.3850/978-981-07-7137-9_194.

Chanchi Golondrino J., MacRae GA., Chase J., Rodgers GW. and Clifton GC. (2013) Hysteretic Behavior of Symmetrical Friction Connections (SFC) Using Different Steel Grade Shims. Singapore: 10th Pacific Structural Steel Conference (PSSC 2013), 8-11 Oct 2013. : 548-553.

Dhakal RP. and MacRae RP. (2013) Ceiling systems design and installation lessons from the Canterbury Earthquakes. Tokyo, Japan: 10th International Conference on Urban Earthquake Engineering (10CUEE), 1-2 Mar 2013. In 10CUEE Conference Proceedings.

Koopaee ME., Dhakal RP., Bradley BA. and MacRae GA. (2013) Assessment of collapse capacity of RC buildings based on fiber-element modeling. Wellington, New Zealand: New Zealand Society for Earthquake Engineering Annual Conference (NZSEE2013), 26-28 Apr 2013. : 8pp.

Lin SL., MacRae GA., Dhakal RP. and Yeow TZ. (2013) Building contents sliding during earthquakes. Wellington, New Zealand: New Zealand Society for Earthquake Engineering Annual Conference (NZSEE2013), 26-28 Apr 2013. : 8pp.

Thomson D., Woodhead S., Dhakal RP., Lin SL., Yeow TZ. and MacRae GA. (2013) Application of seismic loss assessments - Reinforced Concrete or Steel? Christchurch, New Zealand: Steel Innovations Conference, 21-22 Feb 2013.

Uma SR., Dhakal RP. and MacRae GA. (2013) Implementation of low damage construction: What are the challenges? Wellington, New Zealand: New Zealand Society for Earthquake Engineering Annual Conference (NZSEE2013), 26-28 Apr 2013.

Yeow TZ., MacRae GA., Dhakal RP. and Bradley BA. (2013) Probabilistic seismic indoor injury estimation. Wellington, New Zealand: New Zealand Society for Earthquake Engineering Annual Conference (NZSEE2013), 26-28 Apr 2013. : 8pp.

Ahmed SM., Gunasekaran U. and MacRae GA. (2012) A parametric study of R.C. slab in beam-column connection under cyclic loading. University of Canterbury, Christchurch, New Zealand: New Zealand Society for Earthquake Engineering: 2012 Annual Technical Conference (NZSEE), 13-15 Apr 2012.

Beziat A., Munoz AM., Chase JG., MacRae GA., Rodgers GW. and Clifton C. (2012) Architecture and Performance of Energy Dissipators and Isolators in Bridges to Prevent Bridge Column Structural Damage. University of Canterbury, Christchurch, New Zealand: New Zealand Society for Earthquake Engineering: 2012 Annual Technical Conference (NZSEE), 13-15 Apr 2012.

Boyer F., Labrosse G., Chase JG., Rodgers GW. and MacRae GA. (2012) Effects of co-efficient of restitution, structural yielding and gap ratios on the impact mechanics of building pounding. Lisbon, Portugal: 15th World Congress on Earthquake Engineering (15WCEE), 24-28 Sep 2012.

Boyer F., Labrosse G., Chase JG., Rodgers GW. and MacRae GA. (2012) Impact Mechanics, Damage and Building Pounding: The Effect of Co-efficient of Restitution, Structural Yielding and Gap Ratio. Christchurch, New Zealand: New Zealand Society for Earthquake Engineering: 2012 Annual Technical Conference (NZSEE), 13-15 Apr 2012. In Proceedings.

Chanchi Goldorino J., MacRae GA., Chase JG., Clifton GC. and Rodgers GW. (2012) Behaviour of asymmetrical friction connections using different shim materials. Christchurch, New Zealand: New Zealand Society for Earthquake Engineering: 2012 Annual Technical Conference (NZSEE), 13-15 Apr 2012.

Chanchi Golondrino J., Chase JG., Rodgers GW., MacRae GA. and Clifton C. (2012) Velocity dependence of HF2V devices using different shaft configurations. University of Canterbury, Christchurch, New Zealand: New Zealand Society for Earthquake Engineering: 2012 Annual Technical Conference (NZSEE), 13-15 Apr 2012. In Proceedings.

Clifton GC., Bruneau M., MacRae GA., Leon R. and Fussell A. (2012) Multistorey steel framed building damage from the Christchurch earthquake series of 2010/2011. In STESSA 2012: PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON BEHAVIOUR OF STEEL STRUCTURES IN SEISMIC AREAS: 15-24.

Dantanarayan H., MacRae GA., Dhakal RP. and Yeow TZ. (2012) Quantifying building engineering demand parameters in seismic events. Christchurch, New Zealand: New Zealand Society for Earthquake Engineering: 2012 Annual Technical Conference (NZSEE), 13-15 Apr 2012.

Dantanarayan H., MacRae GA., Dhakal RP., Yeow TZ. and Uma SR. (2012) Quantifying building engineering demand parameters in seismic events. Lisbon, Portugal: 15th World Conference on Earthquake Engineering (15WCEE), 24-28 Sep 2012.

English R., MacRae GA., Dhakal RP. and Yeow TZ. (2012) Content sliding mechanics in earthquakes. Christchurch, New Zealand: New Zealand Society for Earthquake Engineering: 2012 Annual Technical Conference (NZSEE), 13-15 Apr 2012.

Golondrino JC., MacRae GW., Chase JG. and Clifton CG. (2012) Methodology for quantifying seismic sustainability of steel framed structures. Santiago, Chile: Behaviour of Steel Structures in Seismic Areas (STESSA 2012), 9-11 Jan 2012.

Golondrino JC., Rodgers GW., Chase JG. and MacRae GA. (2012) Design Considerations for the Braced Frames with Asymetric Friction Connections. Santiago, Chile: Behaviour of Steel Structures in Seismic Areas (STESSA 2012), 9-11 Jan 2012.

Golondrino JC., Rodgers GW., Chase JG. and MacRae GA. (2012) Force: Displacement behaviour of high-force-to-volume dissipators (HF2V) and possible applications to steel structures. Santiago, Chile: Behaviour of Steel Structures in Seismic Areas (STESSA 2012), 9-11 Jan 2012.

Kato F., Rodgers GW., MacRae GA. and Chase JG. (2012) Spectral design analysis of sliding hinge joints and HF2V devices for seismic dissipation. University of Canterbury, Christchurch, New Zealand: New Zealand Society for Earthquake Engineering: 2012 Annual Technical Conference (NZSEE), 13-15 Apr 2012. In Proceedings.

Khoo HH., Clifton GC., Butterworth J. and MacRae GA. (2012) Experimental testing of the self-centring sliding hinge joint. Christchurch, New Zealand: New Zealand Society for Earthquake Engineering: 2012 Annual Technical Conference (NZSEE), 13-15 Apr 2012.

Khoo HH., Clifton GC., Butterworth JW. and MacRae GA. (2012) Shim and bolt size effects on the Asymmetric Friction Connection. In STESSA 2012: PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON BEHAVIOUR OF STEEL STRUCTURES IN SEISMIC AREAS: 227-233.

Lin SL., MacRae GA., Dhakal RP. and Yeow TZ. (2012) Contents Sliding Response Spectra. Lisbon, Portugal: 15th World Conference on Earthquake Engineering (15WCEE), 24-28 Sep 2012.

Lin SL., MacRae GA., English R., Yeow TZ. and Dhakal RP. (2012) Contents sliding response spectra. Christchurch, New Zealand: New Zealand Society for Earthquake Engineering: 2012 Annual Technical Conference (NZSEE), 13-15 Apr 2012.

Lin SL., Wu AC., Lin PC., Tsai KC. and MacRae GA. (2012) Development and implementation of buckling restrained braces in Taiwan. Christchurch, New Zealand: New Zealand Society for Earthquake Engineering: 2012 Annual Technical Conference (NZSEE), 13-15 Apr 2012.

MacRae GA., Lu A., Sadashiva V., Wada A., Masuno T., Ziemian R. and Clifton GC. (2012) Residual stress and out-of-plumb effects on steel column seismic behaviour. Santiago, CHILE: 7th International Conference on Behaviour of Steel Structures in Seismic Areas (STESSA), 9-11 Jan 2012. In STESSA 2012: PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON BEHAVIOUR OF STEEL STRUCTURES IN SEISMIC AREAS: 485-489.

Miranda B., MacRae GA., Beyer K. and Yeow TZ. (2012) Torsional considerations in building seismic design. Christchurch, New Zealand: New Zealand Society for Earthquake Engineering: 2012 Annual Technical Conference (NZSEE), 13-15 Apr 2012.

Nigbor B., Gavin H., MacRae GA., Rodgers GW., Nayerloo M., Chase JG., Gutschmidt S. and Granger C. (2012) Earthquake response and structural health monitoring of Christchurch Women's Hospital following the Canterbury and Christchurch earthquakes. Lisbon, Portugal: 15th World Congress on Earthquake Engineering (15WCEE), 24-28 Sep 2012.

Nigbor B., Gavin H., MacRae GA., Rodgers GW., Nayyerloo M., Chase JG., Gutschmidt S. and Granger C. (2012) Structural health monitoring of the base-isolated Christchurch Women's Hospital following the Canterbury earthquakes. University of Canterbury, Christchurch, New Zealand: New Zealand Society for Earthquake Engineering: 2012 Annual Technical Conference (NZSEE), 13-15 Apr 2012.

Saleh M., Yeow T., Macrae G. and Scott A. (2012) Effect of steel fibre content on the fatigue behaviour of steel fibre reinforced concrete. Delft, Netherlands: 7th RILEM International Conference on Cracking in Pavements, 20-22 Jun 2012.

Simon V., Labise CC., Rodgers GA., MacRae GA. and Chase JG. (2012) Limiting Peak Base-Shear and Displacement in Extreme Seismic Events Using Sacrificial Fuses and High-Capacity Viscous Damping. University of Canterbury, Christchurch, New Zealand: New Zealand Society for Earthquake Engineering: 2012 Annual Technical Conference (NZSEE), 13-15 Apr 2012.

Yeow T., MacRae GA., Dhakal RP. and Bradley BA. (2012) Seismic sustainability assessment of structural systems: A preliminary case study. University of Canterbury, Christchurch, New Zealand: New Zealand Society for Earthquake Engineering: 2012 Annual Technical Conference (NZSEE), 13-15 Apr 2012.

Yeow T., MacRae GA., Dhakal RP. and Bradley BA. (2012) Seismic sustainability assessment of structural systems: Frame or wall structures? Lisbon, Portugal: 15th World Congress on Earthquake Engineering (15WCEE), 24-28 Sep 2012.

Ahmed S., Gunasekaran U. and MacRae G. (2011) A Parametric Study of the Reinforced Concrete Slab Subjected to Dynamic Excitation. Kunming, China: 2011 International Conference on Civil Engineering and Building Materials (CEBM), 29-31 Jul 2011.

Chase GJ., Rodgers GW., Corman S. and MacRae GA. (2011) Development and Spectral Analysis of an Advanced Control Law for Semi-Active Resetable Devices. Auckland, New Zealand: 9th Pacific Conference on Earthquake Engineering, 14-16 Apr 2011. In PCEE 2011: Building an Earthquake-Resilient Society.

Corman S., Chase JG., MacRae GA. and Rodgers GW. (2011) Active Valve Control for Controlled Energy Release in Non-Linear Semi-Active Devices. Auckland, New Zealand: 9th Pacific Conference on Earthquake Engineering, 14-16 Apr 2011. In PCEE 2011: Building an Earthquake-Resilient Society.

Khanlou A., Holden M., Yeow T., Scott A., Saleh M., MacRae G., Hicks S. and Clifton GC. (2011) Performance of Concrete Slabs with Different Reinforcing. Auckland, New Zealand: 9th Pacific Conference on Earthquake Engineering, 14-16 Apr 2011. In PCEE 2011: Building an Earthquake-Resilient Society.

Khoo HH., Clifton GC., Butterworth J., Mathieson CD. and MacRae GA. (2011) Development of the Self-Centering Sliding Hinge Joint. Auckland, New Zealand: 9th Pacific Conference on Earthquake Engineering, 14-16 Apr 2011. In PCEE 2011: Building an Earthquake-Resilient Society.

Labise CC., Rodgers GW., MacRae GA. and Chase JG. (2011) Violating Capacity Design in Structures with Viscous Damping and Hysteretic Damping. Auckland, New Zealand: 9th Pacific Conference on Earthquake Engineering, 14-16 Apr 2011. In PCEE 2011: Building an Earthquake-Resilient Society.

Labrosse G., Kujikis A., Chase JG., Cole G., MacRae GA. and Rodgers GW. (2011) Bridge Structure Impact Modelling. Auckland, New Zealand: 9th Pacific Conference on Earthquake Engineering, 14-16 Apr 2011. In PCEE 2011: Building an Earthquake-Resilient Society.

Lu AYC. and MacRae GA. (2011) Residual Stress Effects on the Seismic Performance of Low-Rise Steel Frames. Auckland, New Zealand: 9th Pacific Conference on Earthquake Engineering, 14-16 Apr 2011. In PCEE 2011: Building an Earthquake-Resilient Society.

MacRae GA. (2011) New Zealand School Safety. Tehran, Iran: 6th International Conference on Seismology and Earthquake Engineering (SEE6), 16-18 May 2011.

MacRae GA. (2011) The Continuous Column Concept - Development and Use. Auckland, New Zealand: 9th Pacific Conference on Earthquake Engineering, 14-16 Apr 2011. In PCEE 2011: Building an Earthquake-Resilient Society.

MacRae GA. and Dhakal RP. (2011) Lessons from the February 2011 M6.3 Christchurch Earthquake. Tehran, Iran: Sixth International Conference of Seismology and Earthquake Engineering (SEE6) Workshop on the Seismic Retrofit of Schools, 17-18 May 2011.

MacRae GA., Hair J. and Dhakal R. (2011) Ceiling Damage in the 2010 Canterbury Earthquake. Tokyo, Japan: 8th International Conference on Urban Earthquake Engineering (CUEE), 7-8 Mar 2011.

Masuno T., MacRae GA., Sadashiva V. and Wada A. (2011) Effect of Building Out-of-Plumb on Seismic Response. Tehran, Iran: 6th International Conference on Seismology and Earthquake Engineering (SEE6), 16-18 May 2011.

Masuno T., MacRae GA., Sadashiva VK. and Wada A. (2011) Response of Out-of-Plumb Structures in Earthquake. Auckland, New Zealand: 9th Pacific Conference on Earthquake Engineering, 14-16 Apr 2011. In PCEE 2011: Building an Earthquake-Resilient Society.

Paganotti G., Dhakal RP. and MacRae GA. (2011) Development of Typical Ceiling System Seismic Fragilities. Lake Como, Italy: The 4th Structural Engineers World Congress (SEWC2011-Italy), 4-6 Apr 2011. In SEWC 2011.

Paganotti G., MacRae GA. and Dhakal RP. (2011) Development of Typical NZ Ceiling System Seismic Fragilities. Auckland, New Zealand: 9th Pacific Conference on Earthquake Engineering, 14-16 Apr 2011. In PCEE 2011: Building an Earthquake-Resilient Society.

Roland T., Rodgers GW., Chase JG. and MacRae GA. (2011) Spectral analysis and Assessment of a net-zero base-shear energy dissipation approach for seismic energy mitigation. Auckland, New Zealand: 9th Pacific Conference on Earthquake Engineering, 14-16 Apr 2011. In PCEE 2011: Building an Earthquake-Resilient Society.

Sadashiva VK., MacRae GA. and Deam BL. (2011) A Mechanics Based Approach to Quantify Diaphragm Flexibility Effects. Auckland, New Zealand: 9th Pacific Conference on Earthquake Engineering, 14-16 Apr 2011. In PCEE 2011: Building an Earthquake-Resilient Society.

Sato Y., MacRae GA., Dhakal RP. and Motoyui S. (2011) Seismic Fragility of Japanese Ceiling Systems. Tokyo, Japan: 8th International Conference on Urban Earthquake Engineering (CUEE), 7-8 Mar 2011.

Sato Y., Motoyui S., MacRae GA. and Dhakal RP. (2011) Ceiling Fragility of Japanese Ceiling Systems. Auckland, New Zealand: 9th Pacific Conference on Earthquake Engineering, 14-16 Apr 2011. In PCEE 2011: Building an Earthquake-Resilient Society.

Singh J., MacRae GA., Dhakal RP. and Pampanin S. (2011) Building seismic ceiling fragility using spectral acceleration. Auckland, New Zealand: 9th Pacific Conference on Earthquake Engineering, 14-16 Apr 2011. In PCEE 2011: Building an Earthquake-Resilient Society.

Yeow T., MacRae G., Sadashiva V. and Kawashima K. (2011) Dynamic Stability and Design of Cantilever Bridge Columns. Auckland, New Zealand: 9th Pacific Conference on Earthquake Engineering, 14-16 Apr 2011. In PCEE 2011: Building an Earthquake-Resilient Society.

Yeow T., MacRae GA., Sadashiva V. and Kawashima K. (2011) Design And Dynamic Stability Of Cantilever Bridge Columns. Tehran, Iran: 6th International Conference on Seismology and Earthquake Engineering (SEE6), 16-18 May 2011.

Yu P., Gutschmidt S. and MacRae GA. (2011) Modelling of Rigid Rocking of Structures during Earthquake Using Linear Functions. Auckland, New Zealand: 9th Pacific Conference on Earthquake Engineering, 14-16 Apr 2011. In PCEE 2011: Building an Earthquake-Resilient Society.

MacRae GA. (2010) The Development of the Continuous Column Concept. Tokyo, Japan: 7th International Conference on Urban Earthquake Engineering & 5th International Conference on Earthquake Engineering Joint Conference, 3-5 Mar 2010.

MacRae GA. and Clifton GC. (2010) New Technology Applications, Recent Developments and Research Directions for Seismic Steel Structures in New Zealand. Bangkok, Thailand: 3rd Asia Conference on Earthquake Engineering (ACEE 2010), 1-3 Dec 2010.

MacRae GA., Myint UT. and Jain SK. (2010) Steps in Earthquake Proofing a Country - A Case Study of Myanmar. Wellington, New Zealand: 2010 New Zealand Society of Earthquake Engineering Conference (NZSEE), 26-28 Mar 2010. In 2010 NZSEE Conference Proceedings.

Nayyerloo M., Malherbe A., Chen XQ., Chase JG. and MacRae GA. (2010) Seismic structural displacement measurement using a high-speed line-scan camera: experimental validation. Wellington, New Zealand: New Zealand Society for Earthquake Engineering 2010 Conference (NZSEE 2010), 26-28 Mar 2010.

Rodgers GW., Chase JG., MacRae GA., Bacht T., Dhakal RP. and Desombre J. (2010) Influence Of HF2V Damping Devices On The Performance Of The SAC3 Building Subjected To The SAC Ground Motion Suites. Toronto, Canada: 9th US National Conference on Earthquake Engineering (9NCEE), 25-29 Jul 2010. : 10pp.

Sadashiva VK., MacRae GA. and Deam BL. (2010) Simple Methods to Evaluate Structural Irregularity Effects. Wellington, New Zealand: 2010 New Zealand Society of Earthquake Engineering Conference (NZSEE), 26-28 Mar 2010. In 2010 NZSEE Conference Proceedings.

Tagawa H., MacRae GA. and Lowes L. (2010) Continuous Column Effects on Seismic Response and Stability of U.S. Steel Moment-frame Structures. Kaohsiung, Taiwan: 12th Japan-Korea-Taiwan Joint Seminar on Earthquake Engineering for Building Structures (SEEBUS 2010), 26-27 Nov 2010. : 103-112.

Bradley B., Cubrinovski M., Dhakal R. and MacRae G. (2009) Probabilistic Seismic Performance Assessment of a Bridge-Foundation-Soil System. Christchurch, New Zealand: 2009 NZSEE Conference, 3-5 Apr 2009. In 2009 NZSEE Conference Proceedings.

Bradley BA., Cubrinovski M., Dhakal RP. and MacRae GA. (2009) Probabilistic seismic performance and loss assessment of a bridge-foundation-soil system. Auckland, New Zealand: International Workshop on Soil-Foundation-Structure-Interaction, 26-27 Nov 2009. In Soil-Foundation-Structure Interaction: 211-228.

Nayyerloo M., Chase G., Chen XQ., MacRae G. and Moghaddasi M. (2009) Permanent Deflection Identification of Non-linear Structures Undergoing Seismic Excitation Using Adaptive LMS Filters. Christchurch, New Zealand: New Zealand Society of Earthquake Engineering Annual Conference (NZSEE), 3-5 Apr 2009. In 2009 NZSEE Conference Proceedings.

Nayyerloo M., Chase JG., MacRae GA. and Chen XQ. (2009) Cost Effective Computer Vision Based Structural Health Monitoring using Adaptive LMS Filters. Stanford, CA, USA: 7th International Workshop on Structural Health Monitoring 2009, 9-11 Sep 2009.

Bradley B., Dhakal R., Cubrinovski M. and MacRae G. (2008) Prediction of spatially distributed seismic demands in structures. Beijing, China: 14th World Conference on Earthquake Engineering, 12-17 Oct 2008.

Bradley BA., Dhakal RP., Cubrinovski M., MacRae GA. and Lee DS. (2008) Seismic loss estimation for efficient decision making. Wairakei, New Zealand: 2008 New Zealand Society of Earthquake Engineering Conference (NZSEE 2008), 11-13 Apr 2008. In 2008 NZSEE Conference Proceedings.

Nayyerloo M., Chase JG., MacRae G. and Chen XQ. (2008) Structural Health Monitoring using Adaptive LMS Filters. Auckland, New Zealand: 15th International Conference on Mechatronics and Machine Vision in Practice (M2VIP 2008), 2-4 Dec 2008.

Nayyerloo M., Chase JG., MacRae GA., Chen X. and Hann CE. (2008) Structural Health Monitoring using Adaptive LMS Filters. Auckland, NEW ZEALAND: 15th International Conference on Mechatronics and Machine Vision in Practice, 2-4 Dec 2008. In 2008 15TH INTERNATIONAL CONFERENCE ON MECHATRONICS AND MACHINE VISION IN PRACTICE (M2VIP): 386-391.

Rodgers GW., Chase JG., Dhakal RP., Solberg KM., Macrae G., Mander JB. and Mander TJ. (2008) Investigation of Rocking Connections Designed for Damage Avoidance with High Force-to-Volume Energy Dissipation. Beijing, China: 14th World Conference on Earthquake Engineering, 12-17 Oct 2008. In Proceedings of the 14th World Conference on Earthquake Engineering.

Rodgers GW., Mander TJ., Chase JG., Dhakal RP. and MacRae GA. (2008) Steel beam-column connections designed for damage avoidance utilising high force-to-volume dampers. Toowoomba, Australia: 20th Australasian Conference on the Mechanics of Structures and Materials, 2-5 Dec 2008.

Bradley BA., Dhakal RP., Mander JB. and MacRae GA. (2007) Improved Hazard Model for Performance-Based Earthquake Engineering. Palmerston North, New Zealand: New Zealand Society of Earthquake Engineering 2007 Conference (NZSEE 2007), 30 Mar-1 Apr 2007. In Proceedings of the 2007 Annual NZSEE Technical Conference.

Clifton C., MacRae GA., Mackinven H., Pampanin S. and Butterworth JW. (2007) Sliding Hinge Joints and Subassemblies for Steel Moment Frames. Palmerston North, New Zealand: New Zealand Society of Earthquake Engineering 2007 Conference (NZSEE 2007), 30 Mar-1 Apr 2007. In Proceedings of the 2007 Annual NZSEE Technical Conference.

Mackinven H., MacRae GA., Pampanin S., Clifton GC. and Butterworth J. (2007) Generation four steel moment frame joints. Singapore: 8th Pacific Conference On Earthquake Engineering (8PCEE), 5-7 Dec 2007. In Proceedings of 8th Pacific Conference On Earthquake Engineering (8PCEE).

Peng B., MacRae G., Walpole W., Moss P., Dhakal R. and Clifton C. (2007) Location of Plastic Hinges in Columns of Steel Frames. Palmerston North, New Zealand: New Zealand Society of Earthquake Engineering 2007 Conference (NZSEE 2007), 30 Mar-1 Apr 2007. In Proceedings of the 2007 Annual NZSEE Technical Conference.

Peng BHH., MacRae GA., Walpole WR., Moss PJ. and Dhakal RP. (2007) Evaluation of Lay's equation for plastic hinge location in steel columns. Wairakei, New Zealand: Pacific Structural Steel Conference (PSSC) 2007, 14-16 Mar 2007.

Sadashiva V., MacRae GA., Deam BL. and Maunoury C. (2007) Vertical Mass Irregularity Effects on the Seismic Performance of Shear Buildings. Palmerston North, New Zealand: New Zealand Society of Earthquake Engineering 2007 Conference (NZSEE 2007), 30 Mar-1 Apr 2007. In Proceedings of the 2007 Annual NZSEE Technical Conference.

Sadashiva VK., MacRae GA. and Deam BL. (2007) Evaluation of Vertical Mass Irregularity on the Seismic Performance of Nine Storey Buildings. Singapore: 8th Pacific Conference On Earthquake Engineering (8PCEE), 5-7 Dec 2007. In Proceedings of 8th Pacific Conference On Earthquake Engineering (8PCEE).

Tagawa H., MacRae G. and Lowes L. (2007) Probabilistic evaluation of seismic demand on 3D one-way and two-way steel moment frame structures. In Proceedings of 8th Pacific Structural Steel Conference - Steel Structures in Natural Hazards, PSSC 2007 2: 389-394.

Gunasekaran U., MacRae GA., Fenwick R. and Carr AJ. (2006) Slab effects on building seismic performance. Christchurch, New Zealand: 19th Australasian Conference on Mechanics of Structures and Materials (ACMSM19), 30 Nov-1 Dec 2006. In Progress in Mechanics of Structures and Materials: 289-294.

Kimura Y. and Macrae GA. (2006) Application of elastic cantilever column to limit story drift concentration of braced two story frames. In Real Structures: Bridges and Tall Buildings - Proceedings of the 10th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC 2010 4: 771-776.

MacRae GA. (2006) Decision Making Tools for Seismic Risk. Napier, New Zealand: New Zealand Society of Earthquake Engineering 2006 Conference (NZSEE 2006): Remembering Napier 1931 - Building on 75 Years of Earthquake Engineering in NZ, 10-12 Mar 2006. In Proceedings of the New Zealand Society of Earthquake Engineering Annual Conference Paper No. 47: 8pp.

MacRae GA. and Gunasekaran U. (2006) A Concept for Consideration of Slab Effects on Building Seismic Performance. Napier, New Zealand: New Zealand Society of Earthquake Engineering 2006 Conference (NZSEE 2006): Remembering Napier 1931 - Building on 75 Years of Earthquake Engineering in NZ, 10-12 Mar 2006. In Proceedings of the New Zealand Society of Earthquake Engineering Annual Conference Paper No. 22: 8pp.

MacRae GA., Ballantyne D., Stewart M. and Preuss J. (2006) Seattle Fault Scenario - A Decision-Making Tool for Earthquake Risk. Napier, New Zealand: New Zealand Society of Earthquake Engineering 2006 Conference (NZSEE 2006): Remembering Napier 1931 - Building on 75 Years of Earthquake Engineering in NZ, 10-12 Mar 2006. In Proceedings of the New Zealand Society of Earthquake Engineering Annual Conference Paper No. 13: 8pp.

MacRae GA., Hyde K., Walpole W., Moss P., Hyland C., Clifton GC. and Mago N. (2006) Column Axial Shortening Effects in Steel Frames. Napier, New Zealand: New Zealand Society of Earthquake Engineering 2006 Conference (NZSEE 2006): Remembering Napier 1931 - Building on 75 Years of Earthquake Engineering in NZ, 10-12 Mar 2006. In Proceedings of the New Zealand Society of Earthquake Engineering Annual Conference Paper No. 29: 8pp.

Kim J., Day S., Sugata M., Stanton J. and Macrae GA. (2004) Cyclic Load Testing of Precast Hybrid Frame Connections. Vancouver, Canada: 13th World Conference on Earthquake Engineering (13WCEE), 1 Aug 2004. CD-ROM.

Kim J., Stanton J. and MacRae GA. (2004) Beam Growth in Reinforced Concrete Frames. Vancouver, Canada: 13WCEE, 1 Aug 2004.

Kimura Y. and MacRae G. (2004) Effect of Cantilever Column Flexural Characteristic on Braced Frame Displacements. Vancouver, Canada: 13WCEE, 1 Aug 2004.

MacRae G., Morrow D. and Roeder C. (2004) Near-Fault shaking demands on short structures. In Structures Congress 2000: Advanced Technology in Structural Engineering 103 http://dx.doi.org/10.1061/40492(2000)111.

Preuss J. and MacRae GA. (2004) SEATTLE FAULT SCENARIO - Influencing the Future By Applying Lessons from the Past. Seattle, WA, USA: Kobe University-University of Washington International Symposium #1 on Design Strategy towards Safety & Symbiosis of Urban Space, 14 Jun 2004.

Tagawa H. and MacRae G. (2004) Capacity spectra method for estimating SDOF oscillator demands. In Structures - A Structural Engineering Odyssey, Structures 2001 - Proceedings of the 2001 Structures Congress and Exposition 109 http://dx.doi.org/10.1061/40558(2001)64.

Tagawa H., MacRae G. and Lowes L. (2004) Stability and Redundancy of Simple Structural Models under Earthquake Dynamic Motions. Vancouver, Canada: 13WCEE, 1 Aug 2004.

Tagawa H., MacRae GA. and Lowes L. (2004) Evaluation and Mitigation of P-Delta effects on 2D frame behavior. Long Beach, CA, USA: 2004 SSRC Annual Stability Conference, 24 Mar 2004. In 2004 Annual Technical Session Proceedings.

Hoedajanto D. and MacRae GA. (2003) Use of Pushover Analysis in Performance Based Design of Multistory Buildings. Bali, Indonesia: The Ninth East Asia-Pacific Conference on Structual Engineering and Construction (EASEC), 16 Dec 2003.

Kimura Y. and MacRae GA. (2003) Effect of the Column Flexural Stiffness and Strength on the Story Drift Concentration of Braced Multi Story Frames. Bali, Indonesia: The Ninth East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-9), 16 Dec 2003.

MacRae GA. and Tagawa H. (2003) Near-Fault Shaking Demands on Short Structures. Seattle, WA, USA: ASCE/SEI Structures Congress and Exposition: Engineering Smarter, 29 May 2003.

MacRae GA., Kimura Y. and Roeder C. (2003) System Considerations of Concentrically Braced Steel Frames with CFT Columns. International Workshop on Steel and Concrete Composite Construction (IWSCCC-2003), 8-9 Oct 2003. In Proceedings of IWSCCC-2003 http://www.ncree.org.tw/iwsccc/PDF/13%20-%20MacRae: 133-142.

Roeder CW., MacRae G., Gunderson C. and Lehman DE. (2003) Seismic Design Criteria for CFT Braced Frame Connections. International Workshop on Steel and Concrete Composite Construction (IWSCCC-2003), 8-9 Oct 2003. In Proceedings of IWSCCC-2003: 97-106.

Stanton J., MacRae GA. and Lehman D. (2003) Building Damage During the 2001 Nisqually Earthquake. Seattle, WA, USA: ASCE/SEI Structures Congress and Exposition: Engineering Smarter, 29 May 2003.

Tagawa H., MacRae GA. and Lowes LN. (2003) Seismic Behaviour of Three Fundamental Framing Systems. Naples, Italy: Stessa 2003: Behaviour of Steel Structures in Seismic Areas, 9 Jun 2003. In Proceedings of the 4th International Specialty Conference.

Kim J., Stanton JF. and MacRae GA. (2002) Design Issues of Hybrid Frames. Boston, MA, USA: 7th National Conference on Earthquake Engineering, 21 Jul 2002.

Kimura Y. and MacRae GA. (2002) The Effect of Structural Properties on the Soft Story Mechanism of Two Story Braced Frames. Nagoya: Architectural Institute of Japan, 1 Jan 2002.

Kimura Y., MacRae GA. and Roeder CW. (2002) Effect of Column Flexural Stiffness on Braced Frame Performance. Boston, MA, USA: 7th National Conference on Earthquake Engineering, 21 Jul 2002.

MacRae GA., Unocic F. and Kramer S. (2002) Foundation Effects on Structural Ductility Demands. Boston, MA, USA: 7th U.S. National Conference on Earthquake Engineering, 21 Jul 2002.

Roeder CW., MacRae GA. and Waters C. (2002) Seismic Behavior of Steel Braced Frame Connections to Composite Columns. Chicago, IL USA: Steel Connections IV Workshop, AISC, 1 Oct 2002. : 51-60.

Tagawa H. and MacRae GA. (2002) Near Fault Shaking Effects on Inelastic Single Degree of Freedom Oscillators. Boston, MA, USA: 7th National Conference on Earthquake Engineering, 21 Jul 2002.

Kimura Y., MacRae GA. and Roeder CW. (2001) Steel Braced Frame Composite Column Connection Behavior. Washington, DC, USA: ASCE Structures Congress, 21 May 2001.

MacRae GA. and Tagawa H. (2001) Assess SDOF Inelastic Demands from Near Fault Shaking. Washington, DC, USA: ASCE Structures Congress, 21 May 2001.

Roeder CW. and MacRae GA. (2001) Extending the Fatigue Life of Older Bridges with Riveted Coped Stringer Connections. Minneapolis, MN, USA: Fifth National Workshop on Bridge Research in Progress, 8 Oct 2001.

Tagawa H. and MacRae GA. (2001) Evaluation of Bi-Direction Shaking Assessment Methods for 3-D Structures. Pusan, Korea: The First International Conference on Steel and Composite Structures, 14 Jun 2001.

MacRae GA., Fields D. and Mattheis J. (2000) Ground Motion Characteristic Effects On Multistory Steel Frame Response. Auckland, New Zealand: 12th Conference on Earthquake Engineering, 1 Feb 2000.

MacRae GA., Fields D., Turkmen I. and Tagawa H. (2000) Effect of Shaking Characteristics on Steel Moment Resisting Frames. Philadelphia, PA, USA: ASCE Structures Congress, 8 May 2000. In Structures Congress 2000 - Advanced Technology in Structural Engineering: Proceedings of Structures Congress 2000: 106. http://dx.doi.org/10.1061/40492(2000)106.

MacRae GA., Morrow D. and Roeder C. (2000) Short Structure Inelastic Response to Near Fault Shaking. Philadelphia, PA, USA: ASCE Structures Congress, 1 Aug 2000.

Roeder CW. and MacRae GA. (2000) Fatigue Cracking and Expected Remaining Life of Rivetted Steel Bridges. Lake Tahoe, Nevada, USA: October 2000, 1 Oct 2000.

Sugata M., Stanton JF. and MacRae GA. (2000) Seismic Analysis of Post-tensioned Precast Seismic Frame. Auckland, New Zealand: 12th World Conference on Earthquake Engineering, 1 Feb 2000.

Tagawa H. and MacRae GA. (2000) Seismic Response of 3-D Steel Structure with Bi-directional Columns. Montreal, Canada: STESSA Conference, 1 Aug 2000.

MacRae GA., Fields D. and Mattheis J. (1999) Effects of Vertical Content of Ground Shaking on 2-D and 3-D Inelastically Responding Steel Frames. New Orleans, LA, USA: ASCE Structures Congress, 1 Apr 1999.

MacRae GA., Stanton JF. and Kim J. (1999) Design Issues for FRP Jacketed Concrete Columns. Cincinnati, OH, USA: ASCE Materials Congress, 1 May 1999.

Morrow DV., MacRae GA. and Roeder CW. (1999) Near Fault Ground Motion Effects on SDOF Inelastic Response. Seattle, WA, USA: ASCE Lifelines Conference, 1 Aug 1999.

Scott K., Roeder CW. and MacRae GA. (1999) Seismic Assessment of Concrete Filled Steel Frame Substations. Seattle, WA, USA: ASCE Lifelines Conference, 1 Aug 1999.

MacRae GA. (1998) Residual Displacements of Eccentrically Loaded Bridge Columns. Seattle, WA, USA: 6th National Conference on Earthquake Engineering, 1 May 1998.

MacRae GA., Roeder CW., Crocker P., Wong S. and Arima K. (1998) Fatigue Investigation of Two Riveted Steel Bridges. San Francisco, CA, USA: Structural Engineering World Congress, 1 Jul 1998.

Nosho KJ., MacRae GA. and Stanton JF. (1998) Performance of Reinforced Concrete Columns Retrofitted with Carbon Fiber Confinement. Seattle, WA, USA: 6th National Conference on Earthquake Engineering, 1 May 1998.

Savage BM. and MacRae GA. (1998) Developing Engineering Coursework with Multidisciplinary Applications and Field Research Results Proceedings. University of California, Berkeley: Fifth Faculty Enhancement Workshop on Teaching the Materials Science, Engineering and Field Aspects of Concrete, National Science Foundation Center for Science and Technology of Advanced Cement-Based Materials, 12 Jul 1998. Paper T165-5.

Stanton JF., Owen LM. and MacRae GA. (1998) Stress-Strain Properties of Confined Concrete. Seattle, WA, USA: 6th National Conference on Earthquake Engineering, 1 May 1998.

MacRae GA., Nosho KJ., Stanton JF. and Myojo T. (1997) Carbon Fiber Retrofit of Rectangular RC Gravity Columns in Seismic Regions. Sapporo Japan: Third International Symposium on Non-Metallic (FRP) Reinforcement for Reinforced Concrete Structures, 14 Oct 1997.

Roeder CW. and MacRae GA. (1996) Research In Progress on Steel Bridges at University of Washington. Buffalo, NY, USA: Fourth National Workshop on Bridge Research in Progress, 17 Jun 1996. : 231-236.

Stanton J., MacRae GA. and Nosho K. (1996) Carbon Fiber Seismic Retrofit of Poorly Confined Square Reinforced Concrete Columns Subjected to Large Axial Forces. Buffalo, NY, USA: Fourth National Workshop on Bridge Research in Progress, 17 Jun 1996. : 263-268.

Holombo J., MacRae GA. and Priestley MJN. (1994) Seismic Retrofitting of Steel Bridge Columns. Sacramento, CA, USA: Third Annual Caltrans Research Workshop, 27 Jun 1994.

Kowalsky MJ., Priestley MJN. and MacRae GA. (1994) Displacement Based Design of RC Bridge Columns. Queenstown, New Zealand: Second International Workshop on Design of Bridges, 9 Aug 1994.

MacRae GA., Priestley MJN. and Seible F. (1994) Santa Monica Column Splice and Cap-Beam Proof Tests. Berkeley: Second US-Japan Workshop on Seismic Retrofit of Bridges, 1 Jan 1994.

MacRae GA., Priestley MJN. and Seible F. (1994) Santa Monica Column/Cap-Beam Test. Sacramento, CA, USA: Third Annual Caltrans Research Workshop, 27 Jun 1994.

MacRae GA., Priestley MJN. and Seible F. (1994) Shake Table Tests of Twin Column Bridge Bents. Sacramento, CA, USA: Third Annual Caltrans Research Workshop, 27 Jun 1994.

Priestley MJN. and MacRae GA. (1994) Precast Seismic Resisting Frames Using Unbonded Prestressing Tendons. Washington DC, USA: Federation Internationale de la Precontrainte, Washington Congress, 1 Jun 2003.

Priestley MJN. and MacRae GA. (1994) Testing of Two Precast Post-Tensioned Beam/Column Joint Subassemblages with Unbonded Tendons. Chicago, IL USA: PCI, 1994 Annual Meeting and Committee Days, 13 Oct 1994.

Priestley MJN. and MacRae GA. (1994) Testing of Two Precast Post-Tensioned Beam/Column Joint Subassemblages with Unbonded Tendons. Tsukuba, Japan: Fourth Meeting of the U.S.-Japan Joint Technical Coordinating Committee on Precast Seismic Structural Systems (JTCC-PRESSS), 16 May 1994.

Priestley MJN., Seible F., Chai YH. and MacRae GA. (1993) Santa Monica Viaduct Proof Tests. Sacramento, CA, USA: Second Annual Caltrans Seismic Research Workshop, 16 Mar 1993.

MacRae GA. and Priestley MJN. (1992) P-Delta Design for Seismic Areas. La Jolla, CA, USA: Third NSF Workshop on Bridge Engineering Research in Progress, 16 Nov 1992.

Priestley MJN., Seible F., MacRae GA., Chai YH. and Wong R. (1992) Santa Monica Viaduct Retrofit - Full-Scale Test on Column Lap-Splices with #11 [35mm] Reinforcement. La Jolla, CA, USA: Third NSF Workshop on Bridge Engineering Research in Progress, 16 Nov 1992.

MacRae GA. and Kawashima K. (1991) Effect of Post-Elastic Stiffness on the Seismic Response of Single Degree of Freedom Structures Proceedings. Tokyo, Japan: Japan Society of Civil Engineering Symposium on Earthquake Engineering, 31 Aug 1991.

MacRae GA. and Kawashima K. (1991) Residual Displacements of Bridges in Earthquakes. Osaka, Japan: Annual Meeting of the Japan Society of Civil Engineering, 17 Sep 1991.

MacRae GA. and Kawashima K. (1991) The Earthquake Resistance of Steel Bridge Piers. Tokyo, Japan: Nineteenth Japan Road Bridge Conference, 21 Oct 1991.

MacRae GA., Kawashima K., Hasegawa K., Ikeuchi T. and Oshima K. (1991) Behavior of Stiffened Box-Section Steel Bridge Piers in Seismic Regions from Model Tests. Tsukuba: 7th U.S.-Japan Bridge Workshop, UJNR, US-Japan Panel on Wind and Seismic Effects, 8 May 1991.

MacRae GA., Walpole WR. and Carr AJ. (1991) Behaviour and Design of Moment-Resisting Steel Frames. Auckland, New Zealand: Pacific Conference on Earthquake Engineering, 1 Nov 1991.

MacRae GA. and Kawashima K. (1990) Ductility Measurement for the Testing of Steel Bridge Piers. Niigata, Japan: Annual Meeting of the Japan Society of Civil Engineering, 30 Sep 1990.

MacRae GA., Carr AJ. and Walpole WR. (1990) The Dynamic Behavior of Multistory Steel Frames Proceedings. Tokyo, Japan: Eighth Japan Earthquake Engineering Symposium, 12 Dec 1990. : 1599-1604.

MacRae GA., Kawashima K. and Hasegawa K. (1990) Repair and Retrofit of Steel Piers. Public Works Research Institute , Tsukuba Science City, Japan: First U.S.-Japan Workshop on Seismic Retrofit of Bridges, 17 Dec 1990. : 405-421.

MacRae GA., Carr AJ. and Walpole WR. (1989) Inelastic I-Shaped Beam-Columns in Earthquake-Resistant Structures. Gold Coast, Australia: Pacific Structural Steel Conference, 1 May 1989.

MacRae GA., Walpole WR. and Carr AJ. (1989) Cyclic Bending of Steel Beam-Columns in Earthquake-Resistant Structures Proceedings. Gold Coast, Australia: Pacific Structural Steel Conference, 1 May 1989.

MacRae GA. and Carr AJ. (1987) Capacity Design of Steel Moment-Resisting Frames. Wairakei, New Zealand: Pacific Conference on Earthquake Engineering, 1 Aug 1987. 2: 47-58.

Conference Contributions - Other

Jones A., Lee CL. and MacRae GA. (2016) Design And Behaviour Of Buckling Restrained Braces. Wigram, Christchurch, New Zealand: NZSEE Conference, 1-4 Apr 2016.

Kordani R., Rodgers GW., Chase JG. and MacRae GA. (2016) Prediction of Inter-Story Drift Demand in Rocking Wall Structures. Christchurch, NZ: New Zealand Society for Earthquake Engineering Annual Technical Conference (NZSEE 2016), 1-3 Apr 2016.

MacRae GA. (2016) The Mw 7.8 Kaikoura Earthquake, New Zealand. Melbourne, Australia: Australian Earthquake Engineering Society Conference, 25-27 Nov 2016.

Malek A., Scott ACN., Pampanin S., MacRae G. and Hoult N. (2016) Damage Assessment of RC Beam Using Distributed Fibre Optics Strain Sensors. Christchurch: New Zealand Society for Earthquake Engineering Conference, 1-3 Apr 2016.

Uma SR., MacRae GA., Nayyerloo M. and Sadashiva V. (2016) SQUADS: An Interactive Decision Support Tool to Facilitate Dialogue between Clients and Engineers Towards Performance-Based Seismic Design. Wigram, Christchurch, New Zealand: NZSEE Conference, 1-4 Apr 2016.

Chanchi Golondrino J., MacRae GA., Chase JG., Rodgers GW. and Clifton C. (2015) Is the Asymmetrical Friction Connection (AFC) a low damage dissipater? Rotorua, New Zealand: 2015 New Zealand Society for Earthquake Engineering Annual Conference (NZSEE), 10-12 Apr 2015.

Cook J., Rodgers GW., MacRae GW. and Chase JG. (2015) Experimentation with tension-only devices for use with seismic energy dissipation systems. Sydney, Australia: 10th Pacific Conference on Earthquake Engineering (PCEE), 6-8 Nov 2015.

Gholamhoseini A., Khanloo A., MacRae GA., Scott A., Hicks S. and Leon R. (2015) Ultimate Strength Of Reinforced And Steel Fibre Reinforced Concrete (SFRC) Continuous Composite Slabs (An Experimental Study). Auckland, New Zealand: Steel Innovations Conference, Steel Construction New Zealand, 3-4 Sep 2015.

Golondrino JC., MacRae GA., Chase JG., Rodgers GW. and Clifton C. (2015) Velocity effects on Asymmetrical Friction Connections (AFC) using different shim materials. Rotorua, New Zealand: 2015 New Zealand Society for Earthquake Engineering Annual Conference (NZSEE), 10-12 Apr 2015.

Kordani R., Rodgers GW., MacRae GA. and Chase JG. (2015) Seismic performance of slender rocking wall-frames. Rotorua, New Zealand: 2015 New Zealand Society for Earthquake Engineering Annual Conference (NZSEE), 10-12 Apr 2015.

Ladani FT., MacRae GA. and Chase JG. (2015) Effect of Column Splice Location on Seismic Demands in Steel Moment Frames Considering Splice Flexibility. Shanghai, China: 8th International Conference on Behavior of Steel Structures in Seismic Areas (STESSA 2015), 1-4 Jul 2015.

Malek A., Scott ACN., Pampanin S. and MacRae G. (2015) Assessment of post-earthquake damage in RC elements using low-invasive techniques. Rotorua, New Zealand: New Zealand Society for Earthquake Engineering Conference, 10-12 Apr 2015.

Abdolahirad A., MacRae GA., Bull D. and Yeow TZ. (2014) Seismic Evaluation Of Buildings With Out-Of-Straightness. Auckland, New Zealand: 2014 New Zealand Society for Earthquake Engineering Annual Conference (NZSEE), 21-23 Mar 2014.

Borzouie J., MacRae G., Chase GJ. and Clifton C. (2014) Experimental studies on cyclic behaviour of steel base plate connections considering anchor bolts post tensioning. Auckland, New Zealand: 2014 New Zealand Society for Earthquake Engineering Annual Conference (NZSEE), 21-23 Mar 2014.

Chaudhari T., MacRae GA., Bull D., Chase JG. and Hobbs M. (2014) Composite slab effects on beam-column subassemblies: Further development. Auckland, New Zealand: 2014 New Zealand Society for Earthquake Engineering Annual Conference (NZSEE), 21-23 Mar 2014.

Chen A., Lo JOC., Lee CL., MacRae GA. and Yeow TZ. (2014) Vertical acceleration and torsional effects on the dynamic stability and design of C-bent columns. Auckland, New Zealand: 2014 New Zealand Society for Earthquake Engineering Annual Conference (NZSEE), 21-23 Mar 2014.

Cowie K., Fussell A., Clifton C., MacRae G. and Hicks S. (2014) Seismic Design Of Composite Metal Deck And Concrete-Filled Diaphragms. Auckland, New Zealand: 2014 New Zealand Society for Earthquake Engineering Annual Conference (NZSEE), 21-23 Mar 2014.

MacRae GA., Chanchi J. and Yeow T. (2014) What Structure is Best? Auckland, New Zealand: Australasian Structural Engineering Conference (ASEC), 9-11 Jul 2014.

Ramhormozian S., Clifton GC. and MacRae GA. (2014) The Asymmetric Friction Connection With Belleville Springs In The Sliding Hinge Joint. Auckland, New Zealand: 2014 New Zealand Society for Earthquake Engineering Annual Conference (NZSEE), 21-23 Mar 2014.

Tork Ladani F., MacRae G., Chase G. and Clifton C. (2014) Effects Of Column Splice Properties On Seismic Demands In Steel Moment Frames. Auckland, New Zealand: 2014 New Zealand Society for Earthquake Engineering Annual Conference (NZSEE), 21-23 Mar 2014.

Borzouie J., MacRae GA., Chase JG., Rodgers GW. and Clifton GC. (2013) Effect of base flexibility on demands of the structure. Wellington, New Zealand: New Zealand Society for Earthquake Engineering Annual Conference (NZSEE2013), 26-28 Apr 2013.

Borzouie J., Rodgers GW., MacRae GA., Chase JG., Clifton GC. and Moghadam AS. (2013) Base Connections Seismic Sustainability and Base Flexibility Effects. Christchurch, New Zealand: Steel Innovations Conference, 21-22 Feb 2013.

Causse R., Rodgers GW., Chase JG., Chanchi J. and MacRae GA. (2013) Initial and Degraded Performance of Sliding Steel Friction Connections - Velocity Effects, Corrosion Coatings and Shim Materials. Wellington, New Zealand: New Zealand Society for Earthquake Engineering Conference (NZSEE2013), 26-28 Apr 2013.

Causse R., Rodgers GW., Chase JG., Chanchi J., MacRae GA. and Clifton GC. (2013) Characterisation of Velocity Effects. Corrosion Coating and Shim Material on Initial Performance and Degradation of Sliding Friction Connections. Christchurch, New Zealand: Steel Innovations Conference, 21-22 Feb 2013.

Chanchí Golondrino J., MacRae GA., Chase JG., Clifton GC. and Rodgers GW. (2013) Recent Research on Two Low Damage Dampers Applicable to Steel Framing Systems. Christchurch, New Zealand: Steel Innovations Conference, 21-22 Feb 2013.

Chanchí J., MacRae GA., Chase JG., Rodgers GW. and Clifton GC. (2013) Applications of brake pads on Asymmetrical Friction Connections (AFC). Wellington, New Zealand: New Zealand Society for Earthquake Engineering Conference (NZSEE2013), 26-28 Apr 2013.

Chunhaviriyakul P., MacRae GA., Anderson D., Clifton GC. and Leon RT. (2013) Composite Steel- Concrete Construction for New Zealand. Christchurch, New Zealand: Steel Innovations Conference, 21-22 Feb 2013.

Clifton GC. and MacRae GA. (2013) Lessons from the Christchurch Sequence. Christchurch, New Zealand: Steel Innovations Conference, Steel Construction New Zealand, 21-22 Feb 2013.

Cowie K., Hicks S., MacRae GA., Clifton GC. and Fussell A. (2013) Seismic Design of Composite Metal Deck and Concrete-filled Diaphragms - A Discussion Paper. Christchurch, New Zealand: Steel Innovations Conference, 21-22 Feb 2013.

Gardiner S., Clifton GC. and MacRae GA. (2013) Performance, Damage Assessment and Repair of a Multistorey Eccentrically Braced Framed Building following the Christchurch Earthquake Series. Christchurch, New Zealand: Steel Innovations Conference, 21-22 Feb 2013.

Herve R., Rodgers GW., Chase JG., Chanchi J., MacRae GA. and Clifton GC. (2013) Dynamic Friction Co-efficient of Asymmetrical Friction Connections (AFC). Wellington, New Zealand: New Zealand Society for Earthquake Engineering Conference (NZSEE2013), 26-28 Apr 2013.

Hobbs M., MacRae GA., Bull D., Gunasekaran U., Clifton GC. and Leon R. (2013) Slab Column Interaction - Significant or Not? Christchurch, New Zealand: Steel Innovations Conference, 21-22 Feb 2013.

Khanlou A., MacRae GA., Scott A., Hicks S. and Clifton GC. (2013) Performance of Composite Slabs with Different Reinforcement under Hogging Moment. Christchurch, New Zealand: Steel Innovations Conference, 21-22 Feb 2013.

MacRae GA. (2013) Low Damage Construction-Some Systems Issues. Tokyo Institute of Technology, Tokyo, Japan: 10th International Conference on Urban Earthquake Engineering (10CUEE), 1-2 Mar 2013.

MacRae GA. and Clifton GC. (2013) Low Damage Design of Steel Structures. Christchurch, New Zealand: Steel Innovations Conference, 21-22 Feb 2013.

MacRae GA. and Clifton GC. (2013) Rocking Structure Design Considerations. Christchurch, New Zealand: Steel Innovations Conference, 21-22 Feb 2013.

MacRae GA., Hobbs M., Bull D., Chaudhari T., Leon R., Clifton GC. and Chase JG. (2013) Slab Effects on Beam-Column Subassemblies - Beam Strength and Elongation Issues. Palm Cove, Queensland, Australia: Composite Construction VII Conference, 28-31 Jul 2013.

Nashid H., Ferguson WG., Clifton GC., Hodgson M., Seal C. and MacRae GA. (2013) Investigate the relationship between hardness and plastic strain in cyclically deformed structural elements. Wellington, New Zealand: New Zealand Society for Earthquake Engineering Conference (NZSEE2013), 26-28 Apr 2013.

Nashid H., Ferguson WG., Seal CK., Clifton GC., Hodgson MA., MacRae GA. and Choi JH. (2013) Non-Destructive Hardness Testing Method to Determine the Amount of Plastic Strain in Cyclically Deformed Structural Steel Elements. Singapore: The Pacific Structural Steel Conference (PSSC 2013), 8-11 Oct 2013.

Yeung S., Zhou H., Khoo HH., Clifton GC. and MacRae GA. (2013) Sliding shear capacities of the Asymmetric Friction Connection. Wellington, New Zealand: New Zealand Society for Earthquake Engineering Conference (NZSEE2013), 26-28 Apr 2013.

Chanchí Golondrino J., Chase JG., Rodgers GW., MacRae GA. and Clifton GC. (2012) Velocity effects on the behaviour of high-force-to-volume lead dampers (HF2V) using different shaft configurations. Lisbon, Portugal: 15th World Congress on Earthquake Engineering (15WCEE), 24-28 Sep 2012.

Chanchí Golondrino J., MacRae GA., Chase JG., Rodgers GW. and Clifton GC. (2012) Clamping force effects on the behaviour of asymmetrical friction connections (AFC). Lisbon, Portugal: 15th World Congress on Earthquake Engineering (15WCEE), 24-28 Sep 2012.

Clifton GC., Nashid H., Ferguson G., Hodgson M., Seal C., Bruneau M., MacRae GA. and Gardiner S. (2012) Performance of Eccentrically Braced Framed Buildings In The Christchurch Earthquake Series of 2010/2011. Lisbon, Portugal: 15th World Conference on Earthquake Engineering (15WCEE), 24-28 Sep 2012.

Gardiner S., Clifton GC. and MacRae GA. (2012) Performance damage assessment and repair of a multistorey eccentrically braced framed building following the Christchurch earthquake series. Auckland, New Zealand: New Zealand Society of Structural Engineers: Inaugural Structural Engineering Biennial Conference, 2-3 Nov 2012.

Gavin H., Nigbor R., Lawson W., MacRae G., Chase G., Rodgers G. and Gutschmidt S. (2012) Seismic Behavior of the Christchurch Women's Hospital. Washington DC, USA: National Science Foundation Workshop on Lessons Learned from the 2011 Japan and Canterbury Earthquakes, 9-10 Feb 2012.

Khanlou A., MacRae GA., Scott AN., Hicks SJ. and Clifton GC. (2012) Shear performance of steel fibre-reinforced concrete. Perth, Australia: Australasian Structural Engineering Conference (ASEC), 11-13 Jul 2012.

Khoo HH., Clifton GC., Butterworth JW. and MacRae GA. (2012) Developments on the sliding hinge joint. Lisbon, Portugal: 15th World Conference on Earthquake Engineering (15WCEE), 24-28 Sep 2012.

MacRae GA. (2012) Base Isolation in NZ. New Delhi, India: East Asian Summit-India Disaster Management Workshop, 8-9 Nov 2012.

MacRae GA. (2012) Canterbury Earthquake Sequence, Special Session, Panel Discussion Leader. Lisbon, Portugal: 15th World Congress on Earthquake Engineering (15WCEE), 24-28 Sep 2012.

Puthanpurayil AM., Dhakal RP., MacRae GA. and Mukai D. (2012) Nonlinear frequency domain analysis (NFDA): An updated FRF approach for nonlinear dynamic analysis of structures. Perth, Australia: First Australasia and South-East Asia Structural Engineering and Construction Conference (ASEA-SEC-1), 28 Nov-2 Dec 2012.

Simon V., Labise C., Rodgers GW., MacRae GA. and Chase JG. (2012) Inclusion of a sacrificial fuse to limit peak base-shear forces during extreme seismic events in structures with viscous damping. Lisbon, Portugal: 15th World Congress on Earthquake Engineering (15WCEE), 24-28 Sep 2012.

MacRae GA. (2011) The 2010 Canterbury Earthquake. Tehran, Iran: 6th International Conference on Seismology and Earthquake Engineering (SEE6), 16-18 May 2011.

Chanchi JC., MacRae GA. and Clifton GC. (2010) Quantifying Seismic Sustainability of Steel-Framed Structures. Wellington, New Zealand: 2010 New Zealand Society of Earthquake Engineering Conference (NZSEE), 26-28 Mar 2010.

Chanchí JC., MacRae GA., Clifton GC. and Chase G. (2010) Quantifying Seismic Sustainability Of Steel Framed Structures. Christchurch, New Zealand: Research Directions for Steel Structures, 13-15 Apr 2010.

Khanlou A., MacRae GA., Clifton GC. and Hicks S. (2010) Composite Slab Systems. Christchurch, New Zealand: Research Directions for Steel Structures, 13-15 Apr 2010.

Lu A. and MacRae GA. (2010) Extended Direct Analysis - A Better Way of Designing Non-Seismic Steel Frames. Christchurch, New Zealand: Research Directions for Steel Structures, 13-15 Apr 2010.

Lu A., MacRae G. and Clifton C. (2010) Column Residual Stress Effects on the Seismic Performance of Short Steel Frames. Wellington, New Zealand: 2010 New Zealand Society of Earthquake Engineering Conference (NZSEE), 26-28 Mar 2010.

MacRae GA. (2010) Some Steel Seismic Research Issues. Christchurch, New Zealand: Research Directions for Steel Structures, 13-15 Apr 2010.

MacRae GA. (2010) University of Canterbury Research. Christchurch, New Zealand: Research Directions for Steel Structures, 13-15 Apr 2010.

Sadashiva V., MacRae GA. and Deam BL. (2010) Building Regularity Provisions for Seismic Design of Structures. Ohrid, Macedonia: 14th European Conference on Earthquake Engineering (14ECEE), 30 Aug-3 Sep 2010.

Sadashiva V., MacRae GA. and Deam BL. (2010) Seismic Response of Structures with Coupled Vertical Stiffness-Strength Variations. Ohrid, Macedonia: 14th European Conference on Earthquake Engineering (14ECEE), 30 Aug-3 Sep 2010.

Sadashiva VK., MacRae GA. and Deam BL. (2010) Irregularity Limits For Structures With Coupled Vertical Stiffness-Strength Variations. Wellington, New Zealand: 2010 New Zealand Society of Earthquake Engineering Conference (NZSEE), 26-28 Mar 2010.

Chase JG., Chey MH., MacRae G., Carr AJ. and Rodgers GW. (2009) Analytical modelling and MDOF response considerations for semi-active tuned mass damper building systems subjected to earthquake excitation. Christchurch, New Zealand: 13th Asia-Pacific Vibrations Conference (APVC09), 22-25 Nov 2009.

Leslie S., MacRae G., Staiger M., Hyland C. and Clifton GC. (2009) Overstrength Factors for Seismic Design of Steel Structures. Christchurch, New Zealand: 2009 NZSEE Conference, 3-5 Apr 2009.

MacRae GA. (2009) Seattle Fault Scenario - A Decision-Making Tool for Seismic Risk. Yangon, Myanmar: 2nd International Workshop on Seismotectonics in Myanmar and Earthquake Risk Management (SMERM 2009), 29-30 Apr 2009.

MacRae GA., Clifton GC. and Butterworth JW. (2009) Some recent New Zealand Research on seismic steel structures. Philadelphia, PA, USA: STESSA 2009: Behaviour of Steel Structures in Seismic Areas, 16-20 Aug 2009.

Rodgers GW., Chase JG., MacRae G., Bacht T., Desombre JJ. and Dhakal RP. (2009) Analytical Investigation of the Effects of HF2V Damping Devices on the Seismic Performance of the SAC LA3 Building. Christchurch, New Zealand: 13th Asia-Pacific Vibrations Conference (APVC09), 22-25 Nov 2009.

Singh J., MacRae G. and Deam B. (2009) Vertical Acceleration Effects on Buildings. Christchurch, New Zealand: 2009 NZSEE Conference, 3-5 Apr 2009.

Spooner M., MacRae G., Deam B., Sadashiva V. and Gardiner D. (2009) Flexible Floor Diaphragm Seismic Response. Christchurch, New Zealand: 2009 NZSEE Conference, 3-5 Apr 2009.

Sugioka K., MacRae G., Saleh M. and Beamish M. (2009) Experimental Investigation of Stress Reduction for Orthotropic Steel Bridge Decks. Auckland, New Zealand: 7th Austroads Bridge Conference, 26-29 May 2009.

Au EV., MacRae GA., Pettinga D., Deam B. and Sadashiva V. (2008) Simple design for yielding structures subject to torsion. Wairakei, New Zealand: New Zealand Society of Earthquake Engineering Annual Conference, 11-13 Apr 2008.

Hewson M., Nokes R. and MacRae G. (2008) Tsunami effects on structural design. Wairakei, New Zealand: NZSEE Annual Technical Conference, 11-13 Apr 2008.

MacRae GA. (2008) A New Look at Some Earthquake Engineering Concepts. Lake Tahoe, CA, USA: Nigel Priestley Symposium, 4-5 Aug 2008.

MacRae GA., Au E., Pettinga D., Deam B. and Sadashiva V. (2008) A Simple Design Method for Yielding Structures Subject to Torsion. Beijing, China: 14th World Conference on Earthquake Engineering, 12-17 Oct 2008.

Sadashiva V., MacRae G., Deam B. and Fenwick R. (2008) Determination of Acceptable Structural Irregularity Limits for the Use of Simplified Seismic Design Methods. Wairakei, New Zealand: 2008 New Zealand Society of Earthquake Engineering (NZSEE) Conference, 11-13 Apr 2008.

Sadashiva VK., MacRae GA. and Deam BL. (2008) Determination of Irregularity Limits. Beijing, China: 14th World Conference on Earthquake Engineering, 12-17 Oct 2008.

Sugioka K., MacRae GA., Saleh M. and Beamish M. (2008) Life Time Evaluation of Orthotropic Steel Bridge Decks. Sacramento, CA, USA: 2008 International Orthotropic Bridge Conference, 25-30 Aug 2008.

Tagawa H., MacRae G. and Lowes L. (2008) Probabilistic Evaluation of Seismic Performance of 3D Japanese-Type and U.S.-Type Steel Moment Frame Structures. Kyoto, Japan: Fumio Watanabe Symposium, 1-1 Oct 2008.

Tagawa H., MacRae G., Lowes L. and Wada A. (2008) Analytical Simulation of Progressive Collapse of Perimeter Frames Due to Out-of-Plane Behavior. Beijing, China: 14th World Conference on Earthquake Engineering, 12-17 Oct 2008.

Umarani C., MacRae GA., Fenwick R. and Carr AJ. (2008) Slab Effects On Seismic Performance of Moment Frame Buildings. Kyoto, Japan: Fumio Watanabe Symposium, 1-1 Oct 2008.

Urmson C., MacRae G., Walpole W., Moss P., Hyde K. and Clifton GC. (2008) Axial Shortening Effects of Steel Columns in Frames. Wairakei, New Zealand: 2008 New Zealand Society of Earthquake Engineering (NZSEE) Conference, 11-13 Apr 2008.

Hyde K., MacRae GA., Walpole WR., Moss PJ., Hyland C., Clifton GC. and Mago N. (2007) Column Axial Shortening Effects in Steel Frames. Wairakei, New Zealand: Pacific Structural Steel Conference (PSSC) 2007, 14-16 Mar 2007.

MacRae GA., Clifton GC. and Mago N. (2007) Overstrength Effects of Slabs on Demands on Steel Moment Frames. Wairakei, New Zealand: Pacific Structural Steel Conference (PSSC) 2007, 14-16 Mar 2007.

MacRae GA., MacKinven H., Clifton GC., Pampanin S., Walpole W. and Butterworth J. (2007) Tests Of Sliding Hinge Joints For Steel Moment Frames. Wairakei, New Zealand: Pacific Structural Steel Conference (PSSC) 2007, 14-16 Mar 2007.

Tagawa H., MacRae G. and Lowes L. (2007) Probabilistic Evaluation of Seismic Demand on 3D One-Way and Two-Way Steel Moment Frame Structures. Wairakei, New Zealand: Pacific Structural Steel Conference (PSSC) 2007, 14-16 Mar 2007.

Tagawa H., MacRae G. and Lowes L. (2007) Seismic Behavior and Dynamic Stability of 2D Steel Moment Frame Structures. Wairakei, New Zealand: Pacific Structural Steel Conference (PSSC) 2007, 14-16 Mar 2007.

Ballantyne D. and MacRae G. (2006) Lifeline and Transportation System Impacts. San Francisco, CA, USA: 100th Anniversary Earthquake Conference including the 8th U.S. National Conference on Earthquake Engineering (8NCEE), 18-22 Apr 2006.

Kimura Y. and MacRae G. (2006) Effect of Column Flexural Characteristic on Seismic Behavior of Braced Frame with Fixed Column Base. Yokohama, Japan: Stessa 2006 Behaviour of Steel Structures in Seismic Areas, 14-17 Aug 2006.

Kimura Y. and MacRae GA. (2006) Continuous Column Effects on Frame Seismic Behavior. Napier, New Zealand: New Zealand Society of Earthquake Engineering 2006 Conference (NZSEE 2006): Remembering Napier 1931 - Building on 75 Years of Earthquake Engineering in NZ, 10-12 Mar 2006.

Tagawa H., Lowes L., MacRae G. and Wada A. (2006) Dynamic Instability by Link-Element Deformation in Framed-Tube Structures. San Francisco, CA, USA: 100th Anniversary Earthquake Conference including the 8th U.S. National Conference on Earthquake Engineering (8NCEE), 18-22 Apr 2006.

Tagawa H., MacRae G. and Lowes L. (2006) Probabilistic Evaluation of Seismic Performance of 3D One-way and Two-way Steel Moment Frame Structures. Yokohama, Japan: Stessa 2006 Behaviour of Steel Structures in Seismic Areas, 14-17 Aug 2006.

Tagawa H., MacRae GA. and Lowes L. (2004) Evaluations of 1D Simple Structural Models for 2D Steel Frame Structures. Vancouver, Canada: 13th World Conference on Earthquake Engineering (13WCEE), 1 Aug 2004.

Reports

Bruneau M. and MacRae GA. (2017) Reconstructing Christchurch: A Seismic Shift in Building Structural Systems. In Reconstructing Christchurch: A Seismic Shift in Building Structural Systems, Quake Centre. Commissioned by Quake Centre.

Kowalsky M., Sullivan T. and MacRae GA. (2017) The Development of Direct Displacement-Based Design. In Michael John Nigel Priestley, EUCentre Foundation, Pavia. Commissioned by EUCentre.

MacRae GA., Pampanin S., Dhakal R., Palermo A., Baird A. and Tasligedik S. (2012) Review of design and installation practices for non-structural components.Commissioned by Engineering Advisory Group of the Department of Building and Housing.

Buchanan AH., Bull D., Dhakal R., MacRae G., Palermo A. and Pampanin S. (2011) Base Isolation and Damage-Resistant Technologies for Improved Seismic Performance of Buildings.University of Canterbury. Civil and Natural Resources Engineering. Commissioned by Royal Commission of Inquiry into Building Failure Caused by the Canterbury Earthquakes. 99pp-99pp.

Buchanan AH., Bull D., Dhakal RP., MacRae GA., Palermo P. and Pampanin S. (2011) Base Isolation and Damage-Resistant Technologies for Improved Seismic Performance of Buildings.Commissioned by Royal Commission for the Canterbury Earthquakes.

MacRae GA., Clifton GC. and Megget L. (2011) Review of NZ Building Codes of Practice.Commissioned by Royal Commission for the Canterbury Earthquakes.

MacRae G. and Deam B. (2009) Building regularity for simplified modelling.Department of Civil and Natural Resources Engineering, University of Canterbury, Christchurch, New Zealand. Commissioned by NZ Earthquake Commission. 118pp.

Hyde K., MacRae G., Walpole W. and Moss P. (2006) Axial Shortening of Steel Columns Subject to Constant Axial Compression and Inelastic Cyclic Displacements, Civil Engineering Research Report 2006-06.University of Canterbury. Commissioned by Steel Construction New Zealand.

Peng B., MacRae G., Walpole W., Moss P. and Dhakal R. (2006) “Plastic Hinge Location in Columns of Steel Frames”, Civil Engineering Research Report, 2006-05.Commissioned by Steel Construction New Zealand.

Banks G., Stanton J. and MacRae GA. (2004) “Performance of Reinforced Concrete Spandrel Beams in Harborview Hospital Retrofitted with Fiber Sheets”, Final Report to University of Washington’s Capital Projects Office.Commissioned by University of Washington.

Park R., Watanabe F. and MacRae GA. (2003) “Seismic Design of Precast Concrete Building Structures”, International Federation of Structural Concrete, Federation International Beton (FIB) State of the Art Report, Bulletin 27, Lausanne, Switzerland.Commissioned by Federation International Beton.

MacRae GA. and Tagawa H. (2002) “Methods to Estimate Displacements of PG&E Structures”, PGE/PEER Task No. 505, Final Report, PEER, Richmond.Commissioned by Pacific Earthquake Engineering Research Centre.

MacRae GA. and Tagawa H. (2001) “Methods to Estimate Displacements of PG&E Structures”, PGE/PEER Task No: 505, Draft Progress Report, PEER, Richmond.Commissioned by Pacific Earthquake Engineering Research Centre.

MacRae GA. and Tagawa H. (2001) “Methods to Estimate Displacements of PG&E Structures”, PGE/PEER Task No: 505, Summary Progress Report, PEER Meeting, Oakland.Commissioned by Pacific Earthquake Engineering Research Centre.

Kim J., MacRae GA. and Stanton JF. (2000) “Testing of Hybrid Frame Corner Beam-Column Subassembly with Continuous Post-Tensioning Steel”, Charles Pankow Builders Limited.Commissioned by Charles Pankow Builders Limited.

MacRae GA. and Tagawa H. (2000) “Methods to Estimate Displacements of PG&E Structures”, PGE/PEER Task No: 505, Interim Progress Report, PG&E Meeting, PEER, Richmond.Commissioned by Pacific Earthquake Engineering Research Centre.

Stanton JF., Day S., Sugata M. and MacRae GA. (2000) “Cyclic Load Testing of Precast Hybrid Frame Moment-Resisting Connections”, Final Report, Charles Pankow Builders Limited.Commissioned by Charles Pankow Builders Limited.

MacRae GA. (1999) “Parametric Study on the Effect of Ground Motion Demands and Dynamic Characteristics”, SEAOC-ATC-CUREE, Final Report, SAC.Commissioned by SAC Steel Project.

MacRae GA. and Roeder CW. (1999) “Near Fault Ground Motion Effects on PG&E Structures”, PGE-PEER.Commissioned by Pacific Earthquake Engineering Research Centre.

Roeder CW. and MacRae GA. (1999) “Seismic Behavior of Concrete-Filled Steel Frame Substations”, Final Report, PGE-PEER.Commissioned by Pacific Earthquake Engineering Research Centre.

Roeder CW. and MacRae GA. (1998) “Fatigue Cracking of Riveted Steel Tied Arch and Truss Bridges”, WA-RD 447.1, Washington State Department of Transportation.Commissioned by Washington State Department of Transportation.

Roeder CW. and MacRae GA. (1997) “Seismic Building Evaluation of Infilled Steel Frames and Near Field Effects”, First Pacific Gas and Electricity Workshop on Seismic Reliability of Utility Lifelines, San Francisco, California.Commissioned by Pacific Earthquake Engineering Research Centre.

MacRae GA. and Resnick S. (1996) "Recycled Glass Paving Tile Performance", Report No. SGEM 96-4, Department of Civil Engineering, University of Washington.Commissioned by Clean Washington.

Stanton J., MacRae GA. and Nosho K. (1996) "Retrofit of Reinforced Concrete Columns Using Forca Tow Sheet Carbon Fiber Wrapping", Report No. SGEM 96-2, Department of Civil Engineering, University of Washington.Commissioned by Tonen Corporation.

Holombo J., MacRae GA., Priestley MJN. and Seible F. (1995) "Steel Column Proof Tests of the Bayshore and Central Viaducts", Structural Systems Research Project, Report No. SSRP 95/05, Department of Applied Mechanics and Engineering Sciences, University of California, San Diego.Commissioned by California Department of Transportation.

Priestley MJN., Seible F. and MacRae GA. (1995) The Kobe Earthquake of January 17, 1995, Initial Impressions from a Quick Reconnaissance Structural Systems Research Project, Report No. SSRP 95/03, Department of Applied Mechanics and Engineering Sciences, University of California, San Diego.71.

Kowalsky MJ., Priestley MJN. and MacRae GA. (1994) "Displacement-Based Design - A Methodology for Single Degree of Freedom Reinforced Concrete Structures", Structural Systems Research Project, Report No. SSRP 94/16, Department of Applied Mechanics and Engineering Sciences, University of California, San Diego.Commissioned by California Department of Transportation..

MacRae GA. and Priestley MJN. (1994) "Precast Post-Tensioned Ungrouted Concrete Beam-Column Subassemblage Tests", Structural Systems Research Project, Report No. SSRP 94/10, Department of Applied Mechanics and Engineering Sciences, University of California, San Diego, 124pp.Commissioned by National Science Foundation.

MacRae GA., Hodge C., Priestley MJN. and Seible F. (1994) "Route 5/405 Separation. Shake Table Tests of As-Built and Retrofitted Configuration", Structural Systems Research Project, Report No. SSRP 94/16, Department of Applied Mechanics and Engineering Sciences, University of California, San Diego, 246pp.Commissioned by California Department of Transportation..

MacRae GA., Priestley MJN. and Seible F. (1994) "Santa Monica Viaduct Retrofit - Large-Scale Column-Cap Beam Joint Transverse Test", Test Report No. TR - 94/02, Department of Applied Mechanics and Engineering Sciences, University of California, San Diego.Commissioned by California Department of Transportation.

Priestley MJN., MacRae GA., Ingham J. and Innamorato D. (1994) "I-10 Santa Monica Freeway/La Cienega-Venice Blvd. Undercrossing", Chapter 4 of "The Northridge Earthquake of January 17, 1994 - Damage Analysis of Selected Freeway Bridges" edited by Priestley M. J. N., Seible F. and Uang C. M., Structural Systems Research Project, Report No. SSRP 94/06, Department of Applied Mechanics and Engineering Sciences, Un.Commissioned by California Department of Transportation.

MacRae GA. and Kawashima K. (1993) The Seismic Response of Bilinear Oscillators Using Japanese Earthquake Records", Journal of Research of the Public Works Research Institute, Vol. 30.Commissioned by Ministry of Construction, Japan.

MacRae GA., Priestley MJN. and Tao J. (1993) P-Delta in Seismic Regions Structural Systems Research Project, Department of Applied Mechanics and Engineering Sciences, University of California, San Diego, May, Report No. SSRP 93/05.115.

Priestley MJN., Seible F., MacRae GA., Chai YH. and Wong R. (1993) "Santa Monica Viaduct Retrofit Full-Scale Test on Column Lap Splices with #18 [57mm] Reinforcement", Test Report No. TR - 93/02, Department of Applied Mechanics and Engineering Sciences, University of California, San Diego.Commissioned by California Department of Transportation.

Kawashima K., MacRae GA. and Hasegawa K. (1992) The Strength and Ductility of Steel Bridge Piers Based on Loading Tests", Journal of Research of the Public Works Research Institute, Vol. 29.Ministry of Construction, Japan.

Xiao Y., MacRae GA., Hamada N., Priestley MJN. and Seible F. (1992) "Rocking and Capacity Test of Model Bridge Pier", Structural Systems Research Project, Report No. SSRP 92/06, Department of Applied Mechanics and Engineering Sciences, University of California, San Diego.Commissioned by California Department of Transportation..

MacRae GA., Carr AJ. and Walpole WR. (1990) The Seismic Response of Steel Frames Research Report 90-6, Department of Civil Engineering, University of Canterbury, New Zealand.Commissioned by NZ Heavy Engineering Research Association.

Oral Presentations

Ladani FT., MacRae GA., Clifton C. and Chase JG. (2017) Recent NZ Applications of, and Developments in, Low Damage Technology for Steel Structures. Santiago, Chile: Flexural Properties Of Bolted Wide Flange Column Splices, 16th World Conference on Earthquake Engineering, 01 Jan 2017.

MacRae GA. and Clifton GC. (2017) Recent NZ Applications of, and Developments in, Low Damage Technology for Steel Structures. Wellington: NZSEE Conference, NZSEE Conference, 27 Apr 2017.

MacRae GA. (2012) Canterbury Earthquake Decisions. Indian Institute of Technology Gandhinagar, Ahmedabad, India: Public Lecture.

MacRae GA. (2012) Discussion Seminar on Low Damage Construction. National Centre for Research in Earthquake Engineering (NCREE), Taipei.

MacRae GA. (2012) Low Damage Construction. National Centre for Research in Earthquake Engineering (NCREE), Taipei, Taiwan.

MacRae GA. (2012) Some thoughts on Low Damage Construction. Nirma University, Ahmedabad, India.

MacRae GA. (2012) The Canterbury Earthquakes. Anna University, Chennai, India.

MacRae GA. (2012) The Canterbury Earthquakes. Central Ahmedabad, India: American Society of Civil Engineering-Indian Section (ASCE-IS), Indian Concrete Institute (ICI) and Professionals Meeting.

MacRae GA. (2012) The Canterbury Earthquakes. Central Jakarta, Indonesia: Jakarta 111 Building Committee Invitational Lecture.

MacRae GA. (2012) The Canterbury Earthquakes. Gujarat Technical University, Ahmedabad, India: LD College of Engineering Lecture.

MacRae GA. (2012) The Canterbury Earthquakes. Indian Institute of Technology Gandhinagar, Ahmedabad, India: Seismic Design of Reinforced Concrete Buildings.

MacRae GA. (2012) The Canterbury Earthquakes. National Taiwan University, Civil Engineering Department, Taipei, Taiwan.

MacRae GA. (2012) The Canterbury Earthquakes. University of California, Davis, CA, USA.

MacRae GA. (2012) The Canterbury Earthquakes. University of Washington, Seattle, WA, USA.

MacRae GA. and Holmes W. (2012) The Canterbury Earthquakes - Behavior Observed and Decisions Made. Stanford University, Palo Alto, CA, USA: Stanford University Invitational Lecture.

Hare J., Clifton GC., MacRae GA. and Sharpe R. (2011) Building Design in Wake of Canterbury Quakes. Royal Society Website: Royal Society Science Media Centre Briefing.

Hare J., Clifton GC., MacRae GA. and Sharpe R. (2011) Building Design in Wake of Canterbury Quakes. Science Media Centre: Science Media Centre Briefing.

MacRae GA. (2011) The Canterbury Earthquakes - A Structural Engineering Perspective. Smails & Co, Wigram: Architectural Designers NZ Inc..

MacRae GA. (2011) The Canterbury Earthquakes - A Structural Engineering Perspective. St Matthew’s Church Hall, Bryndwr: Royal Society of NZ – Canterbury Branch.

MacRae GA. (2011) University of Canterbury Building Assessment. Big Top Too Tent, College of Engineering, University of Canterbury: College of Engineering Forum.

MacRae GA. (2010) Structural Engineering Considerations. F3, Forestry Building, University of Canterbury: Symposium on the Darfield (Canterbury) Earthquake.

MacRae GA. and Dhakal RP. (2010) 2010 NZ (Canterbury) Earthquake: Lessons Learnt. Bangkok, Thailand: 3rd Asia Conference on Earthquake Engineering (ACEE 2010), 01 Dec 2010.

Other

MacRae GA. (2012) Initiator and speaker at 5 day Short Course on Seismic Design of Structures, IIT Gandhinagar, November 2012. .

Batchelar M., Cattanach A., Clifton GC., Clarke W., Hare J., MacRae GA., Middleton D., Sharpe R. and Wood P. (2011) The Canterbury Earthquakes: Answers to critical questions about buildings. .

MacRae GA. and Clifton GC. (2010) Steel Structures Workshop 2010, Research Directions for Steel Structures, Compilation of Presentations, University of Canterbury, 13-14 Apr 2010. .

Editorial Work

Displaying all items.

Journal of Structural Engineering Editorial Board Member ( 2000 - 2005)
Journal of Structural Engineering, ASCE Publications Associate Editor ( 0 - 2020)

Review and Refereeing

Displaying all items.

International Journals ( 2000 - 2005)

Journal of Bridge Engineering ( 2000 - 2020)

Journal of Structural Engineering ( 2000 - 2005)

Journal of Structural Engineering ( 2003 - 2005)

Affiliations

American Society of Civil Engineers (ASCE) (Professional Organisation): Member
American Society of Civil Engineers (ASCE) (Professional Organisation): Member of LRFD Committee
American Society of Civil Engineers (ASCE) (Professional Organisation): Member of Seismic Effects Committee
Architectural Institute of Japan (AIJ) (Professional Organisation): Member
Earthquake Engineering Research Institute (EERI) (Professional Organisation): Member
GeoHazards International (GHI) (Professional Organisation): Member 2002-2005
NEES Consortium, Inc (NEESinc) (Professional Organisation): Member 2003-2005
New Zealand Society for Earthquake Engineering (NZSEE) (Professional Organisation): Member
Structural Engineering Society (SESOC) (Professional Organisation): Member
Structural Engineers Association of Washington (SEAW) (Professional Organisation): Corresponding member 2002-2005

Research Projects

Real-time Structural Health Monitoring of Nonlinear Hysteretic Structures