Research/Scholarly/Creative Works

Journal Articles

• Hawken M., Reid S., Clarke D., Watson M., Fee C. and Holland D. (2023) Characterization of Pressure Drop through Schwarz‑Diamond Triply Periodic Minimal Surface Porous Media. Chemical Engineering Science 119039 http://dx.doi.org/10.1016/j.ces.2023.119039.

• Meffan C., Menges J., Mak D., Dolamore F., Fee C., Nock V. and Dobson R. (2023) A versatile capillaric circuits microfluidic viscometer. Sensors and Actuators A: Physical http://dx.doi.org/10.1016/j.sna.2023.114497.

• Pei Y., Feast S., Holland D. and Fee C. (2023) Performance of various 3D-printed monolith geometries as an alternative to expanded bed adsorption for protein purification. Biotechnology and Bioengineering http://dx.doi.org/10.1002/bit.28398.

• Reynolds BW., Fee CJ., Morison KR. and Holland DJ. (2023) Characterisation of Heat Transfer within 3D Printed TPMS Heat Exchangers. International Journal of Heat and Mass Transfer 212 http://dx.doi.org/10.1016/j.ijheatmasstransfer.2023.124264.

• Ariyadasa S., Billington C., Shaheen M., Ashbolt NJ., Fee C. and Pang L. (2022) Use of a Novel DNA-Loaded Alginate-Calcium Carbonate Biopolymer Surrogate to Study the Engulfment of Legionella pneumophila by Acanthamoeba polyphaga in Water Systems. Microbiology Spectrum 10(4) http://dx.doi.org/10.1128/spectrum.02210-22.

• Ariyadasa S., Daear W., Abeysekera G., Billington C., Fee C., Prenner E. and Pang L. (2022) Evaluation of Biopolymer Materials and Synthesis Techniques to Develop a Rod-Shaped Biopolymer Surrogate for Legionella pneumophila. Polymers 14(13) http://dx.doi.org/10.3390/polym14132571.

• Dolamore F., Houlton B., Fee C., Watson M. and Holland D. (2022) A Numerical Investigation of the Hydrodynamic Dispersion in Triply Periodic Chromatographic Stationary Phases. Journal of Chromatography A http://dx.doi.org/10.1016/j.chroma.2022.463637.

• Erfani N., Symons D., Fee C. and Watson M. (2022) A Novel Method to Design Monolithic Catalysts for Non-Isothermal Packed-Bed Reactors Using Topology Optimisation. Chemical Engineering Science http://dx.doi.org/10.1016/j.ces.2022.118347.

• Meffan R., Menges J., Dolamore F., Mak D., Fee C., Dobson R. and Nock V. (2022) Capillaric-Field Effect Transistors. Microsystem & Nanoengineering 8 33 http://dx.doi.org/10.1038/s41378-022-00360-8.

• Ariyadasa S., Abeysekera G., Billington C., Fee C. and Pang L. (2021) Growth phase-dependent surface properties of Legionella pneumophila and their role in adhesion to stainless steel coated QCM-D sensors. Letters in Applied Microbiology 73(2): 257-267. http://dx.doi.org/10.1111/lam.13510.

• Ariyadasa S., Abeysekera G., Premaratne A., Robson B., Billington C., Fee CJ. and Pang L. (2021) Surface-Modified Biopolymer Microparticles: A Potential Surrogate for Studying Legionella pneumophila Attachment to Biofilms in Engineered Water Systems. ACS ES and T Water 1(9): 2057-2066. http://dx.doi.org/10.1021/acsestwater.1c00144.

• Clarke DA., Dolamore F., Fee CJ., Galvosas P. and Holland DJ. (2021) Investigation of flow through triply periodic minimal surface-structured porous media using MRI and CFD. Chemical Engineering Science 231 http://dx.doi.org/10.1016/j.ces.2020.116264.

• Crowther JM., Gilmour LH., Porebski BT., Heath SG., Pattinson NR., Owen MC., Fredericks R., Buckle AM., Fee CJ. and Göbl C. (2021) Molecular basis of a redox switch: Molecular dynamics simulations and surface plasmon resonance provide insight into reduced and oxidised angiotensinogen. Biochemical Journal 478(17): 3319-3330. http://dx.doi.org/10.1042/BCJ20210476.

• Feast S., Fee C., Huber T. and Clarke D. (2021) Printed monolith adsorption as an alternative to expanded bed adsorption for purifying M13 bacteriophage. Journal of Chromatography A 1652 http://dx.doi.org/10.1016/j.chroma.2021.462365.

• Moleirinho MG., Feast S., Moreira AS., Silva RJS., Alves PM., Carrondo MJT., Huber T., Fee C. and Peixoto C. (2021) 3D-printed ordered bed structures for chromatographic purification of enveloped and non-enveloped viral particles. Separation and Purification Technology 254 http://dx.doi.org/10.1016/j.seppur.2020.117681.

• Dolamore F., Dimartino S. and Fee CJ. (2020) Erratum: Numerical elucidation of flow and dispersion in ordered packed beds: Nonspherical polygons and the effect of particle overlap on chromatographic performance (Analytical Chemistry (2019) 91:23 (15009−15016) DOI: 10.1021/acs.analchem.9b03598). Analytical Chemistry 92(12): 8623. http://dx.doi.org/10.1021/acs.analchem.0c02226.

• Huber T., Zadeh HN., Feast S., Roughan T. and Fee C. (2020) 3D printing of gelled and cross-linked cellulose solutions, an exploration of printing parameters and gel behaviour. Bioengineering 7(2) http://dx.doi.org/10.3390/bioengineering7020030.

• Menges J., Meffan C., Dolamore F., Fee C., Dobson R. and Nock V. (2020) New flow control systems in capillarics: Off valves. Lab on a Chip http://dx.doi.org/10.1039/D0LC00811G.

• Zadeh HN., Huber T., Nock V., Fee C. and Clucas D. (2020) Complex geometry cellulose hydrogels using a direct casting method. Bioengineering 7(2): 1-13. http://dx.doi.org/10.3390/bioengineering7020058.

• Dolamore F., Dimartino S. and Fee CJ. (2019) Numerical Elucidation of Flow and Dispersion in Ordered Packed Beds: Nonspherical Polygons and the Effect of Particle Overlap on Chromatographic Performance. Analytical Chemistry 91(23): 15009-15016. http://dx.doi.org/10.1021/acs.analchem.9b03598.

• Huber T., Feast S., Dimartino S., Cen W. and Fee C. (2019) Analysis of the effect of processing conditions on physical properties of thermally set cellulose hydrogels. Materials 12(7) http://dx.doi.org/10.3390/ma12071066.

• Dolamore F., Fee CJ. and Dimartino S. (2018) Modelling ordered packed beds of spheres: The importance of bed orientation and the influence of tortuosity on dispersion. Journal of Chromatography A 1532: 150-160. http://dx.doi.org/10.1016/j.chroma.2017.12.004.

• Huber T., Clucas DM., Vilmay M., Pupkes B., Stuart J., Dimartino S. and Fee C. (2018) 3D Printing Cellulose Hydrogels Using LASER Induced Thermal Gelation. Journal of Manufacturing and Materials Processing 2(3) 42: 19. http://dx.doi.org/10.3390/jmmp2030042.

• Rezanavaz R., Fee CJ. and Dimartino S. (2018) GMA-based emulsion-templated solid foams: Influence of co-crosslinker on morphology and mechanical properties. Journal of Applied Polymer Science 135(21) http://dx.doi.org/10.1002/app.46295.

• Fee CJ. (2017) 3D-Printed Porous Bed Structures. Current Opinion in Chemical Engineering 18: 10-15. http://dx.doi.org/10.1016/j.coche.2017.07.003.

• Nawada S., Dimartino S. and Fee C. (2017) Dispersion behavior of 3D-printed columns with homogeneous microstructures comprising differing element shapes. Chemical Engineering Science 164: 90-98. http://dx.doi.org/10.1016/j.ces.2017.02.012.

• Nawada S., Dimartino S. and Fee C. (2017) Dispersion behavior of 3D-printed columns with homogeneous microstructures comprising differing element shapes. Chemical Engineering Science 164: 90-98. http://dx.doi.org/10.1016/j.ces.2017.02.012.

Intellectual Property

• Fee C. and Feast S. (2018) Separation Medium.Patent No. AU2018903887.

Conference Contributions - Published

• Mak D., Meffan RC., Menges J., Dolamore F., Fee C., Dobson R. and Nock V. (2023) Self-driven capillaric viscometer for direct or cascaded bar graph read-out of relative sample viscosity. In : 25-28. IEEE. http://dx.doi.org/10.1109/MEMS49605.2023.10052458.

• Meffan RC., Mak D., Menges J., Dolamore F., Fee C., Dobson RCJ. and Nock V. (2022) Field Effect Transistor-Like Control of Capillaric Flow Using Off-Valves. In Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS) 2022-January: 263-266. http://dx.doi.org/10.1109/MEMS51670.2022.9699604.

• Meffan R., Menges J., Dolamore F., Fee C., Dobson R. and Nock V. (2020) Transistor off-valve based feedback, metering and logic operations in capillary microfluidics. In http://dx.doi.org/10.1109/MEMS51782.2021.9375175.

• Zadeh HN., Huber T., Dixon F., Fee C. and Clucas D. (2020) Fabrication of Cellulose Hydrogel Objects Through 3D Printed Sacrificial Molds. In Lecture Notes in Mechanical Engineering: 265-270. http://dx.doi.org/10.1007/978-3-030-29041-2_33.

• Huber T., Fee C., Clucas D. and Feast S. (2019) Cellulose hydrogels with complex three dimensional structures and tuneable properties made by additive manufacturing. In.

• Dimartino D., Fee CJ., Huber T., Clucas D., Nawada S., Gordon A., Dolamore F. and Rezanavaz R. (2017) 3D printing of chromatographic media: what impact will this produce in the separation sciences? In.

• Kramer M., Fee C. and Watson MJ. (2017) Additive Manufacturing of Alternative Catalyst Support Geometries: A Fractal Approach. In.

Conference Contributions - Other

• Erfani N., Fee C. and Watson M. (2020) Topology Optimization of Monolithic Catalyst Support in Steam Methane Reformer Using Genetic Algorithm. Brisbane, Australia: Chemeca 2020, 27-30 Sep 2020.

• Erfani N., Fee C. and Watson M. (2020) Topology Optimization of Monolithic Catalyst Support in a Steam Methane Reformer Using a Genetic Algorithm. Chemeca 2020, 29 Sep-22 Oct 2020.

• Houlton B., Fee C., Watson M., Pearson H. and Lr Guen MJ. (2018) Simulation of Packed Column Geometries to Obtain Optimized Adsorption Characteristics. University of Canterbury, Christchurch, NZ: Materials@UC, 3-4 Dec 2018.

• Fee CJ., Gordon A., Huber T. and Dimartino S. (2017) Triply periodic minimal surface structures in 3D-printed chromatography columns. Philadelphia, PA, USA: 30th International Symposium on Preparative and Process Chromatography, 16-19 Jul 2017.

• Huber T., Clucas, DM., Vilmay M., Pupkes B., Stuart J., Dimartino S. and Fee CJ. (2017) Developing a 3D printer for the manufacture of cellulose hydrogels. Auckland, New Zealand: Manufacturing and Design NZ, 10-11 May 2017.

• Kramer M., Fee C. and Watson MJ. (2017) Technical Ceramics for Extreme Conditions for Catalytic Substrates by Binder Jetting Additive Manufacturing. Barcelona, Spain: 10th World Congress of Chemical Engineering, 3 Oct 2017.

Oral Presentations

• Kramer M., Fee C. and Watson MJ. (2017) Additive Manufacturing of Alternative Catalyst Support Geometries: A Fractal Approach. University of Auckland: 25th International Conference on Processing and Fabrication of Advanced Materials.

• Kramer1 M., Watson M. and Fee CJ. (2017) Additive Manufacturing of Alternative Catalyst Support Geometries: A Fractal Approach. Auckland, New Zealand: 25th International Conference on Processing and Fabrication of Advanced Materials, 22 Jan 2017.

Student Supervision

Displaying all items.

Current
• PhD - Lubis P: Designing a sustainable product service system to improve health and hygiene of the urban poor In Jakarta slums utilizing the Human Centered Design methodology
• PhD - Pei Y: Fabrication of Printed Uniform Monolith for Protein Chromatography (2024)
• PhD - Trompers M: No-Waste Design
• Masters - Lazareva A: Thermoresponsive Chromatography Columns Using 3D-Printed Ordered Structures (2022)
• Masters - Milton N: Development and Process Scale-Up of Concentrated/Solid Household products (2022)
• Masters - Clements P: New Cosmetics Line (2022)
Completed
• PhD - Ariyadasa S: Developing Micro Mimics for Studying Legionella Mobility and Persistence in Plumbing Systems (2021)
• PhD - Babu K: The Development of a Novel Controlled Release Drug Delivery System (2007)
• PhD - Billikanti J: 2006-PhD/DMA/EdD-Billikanti, Jagan (2009)
• PhD - Buckley-Smith M: The Use of Solubility Parameters to Select Membrane Materials for Pervaporation of Organic Mixtures (2006)
• PhD - Chand A: On-farm Fractionation of Milk Components (2006)
• PhD - Chandrasekaran N: 2010-PhD/DMA/EdD-Chandrasekaran, Neha (2014)
• PhD - Damodaran V: 2006-PhD/DMA/EdD-Damodaran, Vinod (2009)
• PhD - Dolamore F: 3D-Printed Porous Media (2018)
• PhD - Feast S: 3D-Printed Hydrogels for Gene Therapy Separations (2021)
• PhD - Fitzpatrick S: Aerogels structures based on canola seed meal protein (2021)
• PhD - Foster R: Computer Modelling for SOFC Development (2004)
• PhD - Ismail A: Preformulation and Formulation of Steroids and Assessment of an Electronically Modulated Intravaginal Device for Induced Calving or Oestrous synchronization of Cattle. (2007)
• PhD - Lay M: Continuous Radial Flow Chromatography (2005)
• PhD - Lin Y: Novel polymeric microcapsules for targeted drug delivery (2009)
• PhD - MacDonald R: Investigations into the pilot separation of protein and starch biopolymers from oatmeal (2010)
• PhD - Mazumdar N: Optimisation of the Fermentation Conditions for the Production of Secondary Metabolites from High Density Cell Culture of Ettlia sp cultivated in Photobioreactors (2018)
• PhD - McLellan B: Development of an Intraruminal Controlled-Release Device (2007)
• PhD - Newada S: The Use of 3D-Printing in the Study of Chromatographic Packed Bed Microstructures (2018)
• PhD - Pollumallayan P: 2010-PhD/DMA/EdD-Pollumallayan, Prasanna (2014)
• PhD - Prasad H: Electrostatic Interactions of PEGylated Proteins (2020)
• PhD - Rezanavaz R: 3D-Printed Media Materials (2018)
• PhD - Saufi S: 2006-PhD/DMA/EdD-Saufi, Syed (2009)
• PhD - Somasundaram B: 2010-PhD/DMA/EdD-Somasundaram, Balaji (2013)
• PhD - Subramanian K: 2010-PhD/DMA/EdD-Subramanian, Kannan (2014)
• PhD - Zadeh H: 3D Printer Development for Rapid Hydrogel Printing (2018)
• Masters - Buckley-Smith M: Seasonal Variation in the Steam Distilled Essential Oil of Kawakawa (1999)
• Masters - Chandrasekaran S: Affinity Extraction of Beta-Lactoglobulin from Bovine Milk (2016)
• Masters - Cocker T: Preparation of magnetically susceptible chromatography beads for use in magnetically stabilised fluidised beds (1994)
• Masters - Craddock R: Isolation of Prosaposin from Bovine Mil (2001)
• Masters - Fauth P: Equine Plasma Fractionation (2016)
• Masters - Gilmour L: Angiotensinogen redox state and pre-eclampsia in women (2013)
• Masters - He D: A Pilot Pervaporation System: Design and Evaluation (2000)
• Masters - Houlton B: Computational Fluid Dynamics Study of Triply Periodic Minimal Surfaces as Adosprtive Filters (2019)
• Masters - Nilawongse R: Interactions of milk and whey solids with expanded bed adsorption media (2002)
• Masters - Plummer B: 2011-Masters Thesis-Plummer, Ben (2012)
• Masters - Shortt-Smith M: Theories of Creativity in the Technology Workplace (2000)
• Masters - Stevenson R: Magnetically Stabilised Fluidised Bed Chromatography (1998)
• Masters - Wang F: Preparation of Dye-Ligand Polysulfone Microcapsules (2000)
• Masters - Wilkinson K: Gas-Lift Transport of Magnetically Susceptible Particles (1999)
• Masters - Wong K: Scaling up the production of protein nanofibres (2012)
• Masters - Kapadi A: Protein PEGylation Kinetics (2006)
• Masters - Lay M: Continuous Radial Flow Chromatography (1998)
• Masters - Murphy F: Investigation of Dairy Process Case Studies Using SuperPro Designer Process Simulation Software (1998)
• Honours - Allan R: Recombinant production of oligopeptides (2011)
• Honours - Arlidge B: Rate of formation and disassembly of beta-sheets in a self-assembled peptide system (2014)
• Honours - Barton E: Conformation of PEGylated proteins (2012)
• Honours - Bava P: Literature Review and Experimental Plan on Surface Functionalization of Wool Fibres (2011)
• Honours - Bayley J: Effects of PEGylation on Protein Isoelectric Point (2009)
• Honours - Blithe C: Developing a novel additive system for the construction of an agarose hydrogel chromatography column (2015)
• Honours - Bond H: Kinetic modelling of PEGylation reactions (2015)
• Honours - Calder H: 3D Printed Porous Media (2016)
• Honours - Clinton-Baker K: Characterisation and mechanical properties for a pH-regulated poly(ethylene glycol)-peptide bioconjugate gel (2014)
• Honours - Eames S: Automated Dairy Protein Separations (2013)
• Honours - Feast S: 3D Printed Porous Media (2016)
• Honours - Ghorpade K: Recombinant production of oligopeptides (2012)
• Honours - Hocking K: Ionic liquids for protein PEGylation (2011)
• Honours - Hoetjes J: 3D Printed Enzyme Reactor (2016)
• Honours - Hoffman G: Magnetically stabilized fluidized beds (2012)
• Honours - Houwers S: PEGylation Kinetics of Therapeutic Proteins (2014)
• Honours - Joyce N: Magnetically stabilized fluidized beds (2012)
• Honours - Judd K: pH responsive Microcapsules (2009)
• Honours - Kearney P: Carbon Monoxide - Oxygen Exchange in Stabilized Haemoglobin (2013)
• Honours - Kinraid P: Conformational Analysis of Pegylated Cytochrome C Attached to Carboxylated Polystyrene Nanoparticles (2011)
• Honours - Macown R: Purification of Neuraminidase from Influenza (2009)
• Honours - Macown R: Purification of Neuraminidase from Influenza (2009)
• Honours - Mail M: Controlled release of phage to control pathogens (2012)
• Honours - Middleton J: pH Responsive Microcapsules (2009)
• Honours - Millard K: Ionic Liquids for Protein PEGylation (2011)
• Honours - Moerdyk N: Protein reactions in ionic liquids (2012)
• Honours - Momich D: Evaluation of a polymeric convective media for chromatographic applications (2011)
• Honours - Moore M: 3D Printed Porous Media (2016)
• Honours - Neild-Patterson K: Manufacturing of 3D-printed porous gyroid structures designed for the throughput of yeast suspensions (2015)
• Honours - Plummer B: Protein PEGylation (2009)
• Honours - Power R: Properties of a composite agarose hydrogel for 3D printing applications (2015)
• Honours - Priest J: Graphical presentations for molecular interaction concepts (2011)
• Honours - Rutter H: 3D Printed Porous Media (2013)
• Honours - Starling K: Reducing the viscosity of cellulose solutions (2014)
• Honours - Tujuba F: PRODUCTION OF SELF-ASSEMBLING PEPTIDES BY RECOMBINANT TECHNOLOGY (2011)
• Honours - Veatupu W: Electrostatic charge properties of PEGylated proteins (2012)
• Honours - Vlok S: Superhydrophobic Coatings for Antifouling on Stainless Steel (2013)
• Honours - Waarner S: 3D Printed Gyroid Heat Exchangers (2016)
• Honours - Wood R: Glycation of De-Oxy Haemoglobin (2013)
• Honours - Zazli M: Magnetically stabilized fluidized beds (2012)

Editorial Work

Displaying all items.

• Food and Bioproducts Processing Editorial Board Member ( 2009 - 2023)

Review and Refereeing

Displaying all items.

• Analytica Chimica Acta ( 2000 - 2005)
• Analytica Chimica Acta ( 2006 - 2023)
• Biochemical Engineering Journal ( 2006 - 2023)
• Biochemical Engineering Journal ( 2000 - 2005)
• Biochemical Engineering Journal ( 2006 - 2023)
• Biotechnology and Bioengineering ( 2000 - 2005)
• Chemical Engineering Science ( 2000 - 2005)
• Chemical Engineering Science ( 2006 - 2023)
• Food and Bioproducts Processing ( 2000 - 2005)
• Food and Bioproducts Processing ( 2006 - 2023)
• Industrial and Engineering Chemistry Research ( 2000 - 2005)
• Journal of Chromatography A ( 2000 - 2005)
• Journal of Chromatography A ( 2006 - 2023)
• Journal of Industrial and Engineering Chemistry ( 2006 - 2023)
• Separation Science and Technology ( 2000 - 2005)
• Separation Science and Technology ( 2006 - 2023)

Research Groups